PVC Pipe Agricultural irrigation Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:What is the average cost of plastic tubes?
- The average cost of plastic tubes can vary depending on factors such as size, material, and quantity. However, a rough estimate would be anywhere from a few cents to a few dollars per tube.
- Q:Can plastic tubes be used for storing petrochemicals?
- Yes, plastic tubes can be used for storing petrochemicals. Plastic tubes made from materials such as high-density polyethylene (HDPE) or polyvinyl chloride (PVC) are commonly used for their resistance to chemical corrosion and their ability to prevent leaks, making them suitable for storing petrochemicals safely.
- Q:Can plastic tubes be used for craft projects like DIY lamps?
- Yes, plastic tubes can be used for craft projects like DIY lamps. They can be easily cut, shaped, and manipulated to create unique lamp designs. Additionally, plastic tubes are lightweight, durable, and come in various sizes and colors, making them a versatile material for crafting.
- Q:What is the maximum diameter of plastic tubes?
- The maximum diameter of plastic tubes can vary depending on the specific type and manufacturing capabilities, but it typically ranges from a few millimeters to several inches.
- Q:i was blowing on a enclosed tube then i hear and feel a crackle between my ear and jaw and i felt like i knocked the stuffing out of my ear but i still hear perfectly normal and hear good. is something wrong and should i be concerned. my parents said it happened to them when they were little kids
- Your brains exploded.
- Q:i have an amp installation kit, with a 0 gauge power wire, i'm assuming since there is no split loom tubing that came with the complete kit, that it will be unnecessary because the power wire is so thick?
- I'd protect it further - Especially if it goes thru sheet metal or outside the passenger compartment. I've run power feed wire thru plastic tubing, when it is under the body, just to be safe.
- Q:My bff is challenging me to escape from a plastic tube approx. 4 ft. in diameter. I cannot carry any sharp items or tools that might be used to cut the plastic. If i get out in less than 2 hrs. then she will give me $400 in cash. I really need the money for my two kids. HELP!
- You haven't specified if/how the ends are sealed. The easiest way to get out of somewhere is usually the way you got in...
- Q:How do you prevent plastic tubes from warping in direct sunlight?
- One way to prevent plastic tubes from warping in direct sunlight is by using UV-stabilized plastic materials. These materials contain additives that protect the plastic from the harmful effects of UV rays, ensuring that the tubes maintain their shape and integrity even when exposed to sunlight for extended periods. Additionally, providing shade or covering the tubes with a protective layer can also help prevent warping by reducing the direct exposure to sunlight.
- Q:It is the small piece that stops the tube spring from coming out of the tube when the last round is pumped out.???
- may is correct also it may be a plug for 3 shoot cap.....
- Q:Do plastic tubes have any limitations in terms of recyclability or environmental impact?
- Yes, plastic tubes have limitations in terms of recyclability and environmental impact. While some plastic tubes are recyclable, the process is often complex and requires specialized facilities. Additionally, the presence of multiple materials, such as caps or labels, can further complicate the recycling process. Moreover, certain types of plastic tubes, like those made from mixed plastics or containing non-recyclable components, are not easily recyclable and can end up in landfills or incinerators, contributing to environmental pollution. Therefore, it is important to consider the material composition and design of plastic tubes to minimize their environmental impact and promote recycling efforts.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pipe Agricultural irrigation Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords