Q:what size of main power cable to use for two amps with combined power of 600 watts rms.the length of the run will be about 12 feet from battery to amplifiers.

use a 4 Gage, always reliable and always dependable. Its a bit larger but you will have no problems

Q:Hi will this Graphics card, require a power cable or do i just plug it into the slot and away it goes??

It shouldn't require a power cord, but that almost looks like a reference design card. Oh... that's an AGP card. I don't think they required additional power sources in that series of Nvidia chipsets.

Q:What is the power cable accessories used to do?

The shield has two types of semi-conductive shield and metal shield

Q:I just bought a new computer, a DELL Inspiron 530. It has none of the older 4-pin power cables from the power supply; only the newer SATA power devices. I have an older hard drive, that connects via IDE cables (the gray ribbon). Ive already bought the card that converts the IDE to SATA, and it is connected to the mother board. Here is the problem: the IDE Hard Drive is powered with the 4-pin power supply that Ive seen on EVERY power supply before this one. The IDE to SATA converter came with an extension for that 4-pin power supply. But the power supply in the tower DOESNT HAVE ANY 4-PIN POWER ADAPTERS. It has one free SATA power. Im looking to take the SATA power from my power supply, convert it to the old-style IDE 4-pin power supply (female) and plug it into the 4-pin extension (male) that powers my hard drive and SATA-IDE converter. Most converters go the other way... Please post links with examples of parts, since I cannot find anything that lets me do what I am looking to

The SATA motherboard uses probably ATX or MicroATX. These are motherboard independant, but for SATA drives you need a SATA power adapter (it converts the 4 wire MOLEX into a flat SATA power cable). Most SATA drives come with this or even the motherboard does. if your power supply is ATX and your Motherboard is ATX then it will work (granted the wattage is enough for all your devices).

Q:I just have the power cable for battery, lost the ground cable.. Can I cut from power cable and use for ground? Are they the same thing or different cables.??

yes you could use the power cable for the ground because the power cable and ground cable are the same material, as long as both the same guage size is good to connect. For the ground should be as short as possible to the chassis of the car. ground cable just as important as power to get the circuit DC power circulation.

Q:What kind of material does the power cable accessory contain?

First of all, it should be noted that the short circuit is caused by the current is too large, short circuit occurs when the short-circuit current will be very large, can not be used to describe how many times, and electrical design to consider the wire cross-sectional area will not be great, Heat, so the conductor will be hot

Q:my friend has a dell that has a btx mobo. the power supply looks like all the other power supplys. will getting a regular power cord at radio shack fit and work with the dell power supplys. the cables that come out of the supply are all the same as usual ones.

You will most likely be fine, but check the power rating. If you look at the back of the PC, just below the power cable install you will see a rating for voltage. The cable should match that voltage. I cannot imagine that any power cable for a PC would be higher or lower than the standard, at least if you are in the US.

Q:And if so how much would that cable be and could you supply a link to get it from that place?Im really struggling to find any details of where i can get one so could you possibly check out the item and see if there is any help on there?I currently have a 3A 250v Power cable and i'm wondering if that can help?Thanks alot and if it helps ill pick a best answer soon. Thank you!

High input cable ...? Not really sure what that is, Also, that power supply is junk. 750W and it only has a single 6-pin PCI? That's sad. Good 750W power supplies are at least ?70 and have four 6-pin PCI cables. Heck, a good 430W costs more than that and it's guaranteed to perform better.

Q:NH-YJV-4 * 4 in NH-YJV-4 * 4 in power cable tube

Because the AC operation will produce eddy current, will make the steel pipe and cable heat burned. Single core refers to only one conductor in an insulating layer. When the voltage exceeds 35kV, most of the single-core cable, its core and metal shield layer relationship can be seen as a transformer primary winding coil and the relationship between the core. When the single-core cable core through the current when there will be magnetic lines linked to aluminum or metal shielding layer, so that both ends of the induced voltage. Power safety regulations: 35kV and below the voltage level of the cable are used at both ends of the grounding method, which is because most of these cables are three-core cable, in normal operation, the current flow through the three core sum of zero, in the aluminum There is no flux chain outside the package or metal shield, so that there is essentially no induced voltage at both ends of the aluminum or metal shield, so there is no induced current flowing through the aluminum or metal shield after grounding at both ends. But when the voltage exceeds 35kV, most of the single-core cable, its core and metal shield layer relationship can be seen as a transformer primary winding coil and the relationship between the core. When the single-core cable core through the current when there will be magnetic lines linked to aluminum or metal shielding layer, so that both ends of the induced voltage.

Q:Ok, my pc and monitor have the same socket for a power cable, and i mixed the two cables up, but one has a 5 amp fuse and one has a 10 amp fuse... What one goes where??

put the ten amp on monitor, but doesn't matter either way is fine.