Gypsum Board Ceiling Tiles.
Plaster board with one side vinyl PVC facing and backside with aluminium foil.
Size: 595x595mm, 603x603mm, 605x605mm, 610x610mm, 595x1195mm, 604x1210mm, 605x1210mm ,610x1220mm.
Thickness: 7.00mm, 7.50mm, 8.00mm, 9.00mm, 10.00mm, 12.00mm, 12.50mm
Various colorful PVC patterns; Light weight; Easy for installation;
PVC and Aluminum Foil
Allow Dimension Difference
Containing Water Rate
Class B1 Meet the standard:GB8624-1997
Production Capacity: 10, 000, 000 sq. Mt/year
Payment: T/T or L/C.
Price term: FOB Qingdao(CIF or CNF)
Unit Price/Payment: USD
Transportation: By 20'Container
Loading port: Qingdao port
HS Code: 6809190000
Origin: Shandong, China
Packing: Carton, 8PCS/carton or according to customers' demand
Shipment: Within 20days after receipt of the deposit of T/T, L/C;
Minimum Order: 1x20ft container
There are 51 different colorful pvc patterns and 31 vinyl pvc for you to select.
- Q:Integrated ceiling and gypsum board difference
- Personalized contrast:
For the nowadays home improvement of the mainstream consumer groups - 80/90 later said that the same way of life is unthinkable, for the decoration style is the same, in the living room, my furniture can change, my electrical can change, my Soft equipment can change, but my ceiling can change it?
The traditional gypsum ceiling is the overall lifting brush after the paint, so you will not knock down the gypsum ceiling heavy crane, that would produce a lot of dust and garbage, very environmentally friendly; and construction will affect your daily life; so hanging gypsum The ceiling is generally ten years, fifteen years or even longer and can not be adjusted. Can only let it go immutable.
The integrated ceiling is a modular modular ceiling combination with a snap-fit installation that allows you to adjust your thoughts at any time without affecting your daily life. You want to adjust the color of the top module. Yes, you want to adjust the top The square shape is adjusted into a circular shape, you can, as long as you want to think, you can change your ceiling form.
- Q:Gypsum board ceiling is good?
- Gypsum board to build plaster as raw material, high strength, light weight, thin thickness, easy processing easy construction, fire, mildew, pest control, noise, heat insulation and so on. And gypsum board compared to other materials, low cost, low cost, more economical.
Gypsum board in the waterproof gypsum board used to do the kitchen bathroom ceiling, you can also change the integrated dome of the dull, make a different shape, so that trivial boring kitchen work becomes active, so that the smell of the bathroom have more art And human taste. Gypsum board to do kitchen and toilet ceiling benefits is self-evident.
- Q:Integrated ceiling benefits and disadvantages?
- Choose the free mix: the integrated function of the ceiling is absolutely independent components, you can according to the kitchen, bathroom size, tile color, their own preferences to choose the required ceiling panel, another heating module, ventilation module, lighting modules are Have multiple choice, free match.
- Q:6 square kitchen, with integrated ceiling, or with aluminum buckle board good?
- Metal Ceiling in the aluminum plate is better, the current market is also divided into the following points:
The first type of aluminum-magnesium alloy, which contains some of the manganese, the biggest advantage of the material is good antioxidant capacity, and because adding the right amount of manganese, the strength and stiffness to improve, is the best material ceiling.
The second type of aluminum - manganese alloy, the strength and stiffness of the plate is slightly better than the aluminum - magnesium alloy, but the antioxidant capacity is slightly inadequate;
The third type of aluminum alloy, the plate contains manganese, magnesium less, so its strength and stiffness are significantly lower than the aluminum-magnesium alloy and aluminum-manganese alloy, antioxidant capacity in general.
Integrated ceiling, also known as the overall ceiling, the overall ceiling, that is, the ceiling module and electrical modules, are made into a standard combination of modular modules, installed together when the installation. The core concept of integrated ceiling is "modular, self-assembled". It means that a product is split into several modules, and then the individual modules for a separate development, to maximize its function, and then integrated into a new system.
- Q:Gypsum board ceiling, how to fill the bandage it?
- With caulking material filling, and then use high-strength seam tape with sewing reinforcement. The following is my finishing information, you can refer to:
(1) before the construction of the first slit surface treatment, remove the dust, loose objects and a variety of materials is not conducive to bonding. And then use a mud knife to reconcile the good gypsum caulking cream on the edge of the wedge edge. Determine the location of the seam tape, and then use the mud knife will be stitched in the upper end of paper.
(2) and then use the mud from the top down out of the excess gypsum caulking cream, so that the paper firmly with the gypsum board, the paper center line and slit alignment. With a mud knife to gypsum caulking paste thinly applied to the surface of the joint paper tape, the seam paper tape completely painted. Scrape off the excess seam paste with a knife. After solidification, if necessary, it can be polished with fine sandpaper.
(3) with a mud knife cast a thin layer of the second layer of gypsum caulking paste, both sides were widened the first layer of about 50 mm, dry and then fine sandpaper polished smooth.
(4) evenly cast on both sides of the corners of the gypsum caulking paste. Fold the seam paper tape after the paste into the corners, so that it is tightly embedded in gypsum caulking paste. The same plane seam also used the mud knife from the top down out of the excess caulking cream
- Q:Decoration balcony has been hanging, is not it can not install the clothes rack it?
- Gypsum ceiling can not take ``
Gypsum shock at least to crack the `
- Q:PVC material is good or good gypsum board ceiling
- Used in the living room, bedroom, restaurant with gypsum board, because these places are relatively dry, do not consider the water vapor, do not easily deformed after doing well. Bathroom, kitchen with pvc, because the bathroom, kitchen water vapor, and pvc is a water repellent material, the water will not be deformed. You can also consider integrating the ceiling, which is very popular now.
- Q:Decoration with gypsum board ceiling joints need to gap, generally stay much
- Wood keel spacing
1, with the horizontal tube to find the level of the point, with the ink bucket along the horizontal point of playing the horizontal line;
2, light steel keel: wood keel for the edge of the dragon, the lamp slot position with wood keel or woodworking board production, there are wood production office to brush fire paint, keel at least 50, spacing 30 cm is appropriate, hanging spacing 60-80 cm Is appropriate, gypsum board and board between the people to set aside 5-8 mm gap, gypsum board self-tapping screws 1-2 mm and anti-embroidered treatment, to be smooth and solid, shaped to do smooth lines;
3, wood keel: keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging spacing 60-80 cm is appropriate, hanging bar is strictly prohibited direct use of wooden wedge nails to the top, brush tight fire paint until the wood keel color can not see , The keel on a layer of full-legged rice eucalyptus core 9% board and then on the gypsum board, gypsum board and board between the people to set aside 5-8 mm gap, gypsum board self-tapping screws 1-2 mm and do Anti-embroidered treatment, to be smooth and solid, shaped to do smooth lines;
4, aluminum plate: strict requirements level, light steel keel bayonet to be aligned, keel spacing of 50 or less, hanging spacing 60-80 cm is appropriate, the board when the hand to light, so as not to press the board to the pit And the contact with the tile is not tight to use the sealant to play tight;
5, aluminum-plastic plate: wood keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging spacing 60-80 cm is appropriate, brush tight fire paint, keel on a layer of full-legged rice eucalyptus core With a universal adhesive paste aluminum-plastic plate, aluminum-plastic plate and the board between the reserved 3-4 mm gap, has been filled with other colors to play the effect of grid, to be smooth and solid, shaped to do smooth lines , The angle of the fold surface can not be broken.
- Q:Do you have a ceiling fan with a gypsum board?
- All the layman! Of course you can install: There are several ways, if the weight of the ceiling fan in general, then in the position to be installed, cut part of the gypsum board, increase the local strengthening keel, after the installation of plaster board (make up after the scratch putty, fill paint, see Do not see any traces). If you want to hang the fan is relatively heavy, it would cut the gypsum board area is relatively large (a person's head can be stretched out) after the hanging bar (metal hanging bar) and the original building structure ceilings and installed pre-embedded structural parts, Seal the top, and finally install the ceiling fan on the embedded parts. In short, will be able to install! As long as you are not afraid of trouble no problem.
- Q:What kind of material is the interior of the ceiling?
- Gypsum because of cheap and wall fusion
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range