Main Materials: PVC Resin, Calcium Carbonate
PVC content: 45%, 50%, 55%...
Textures: Printed, Foiled
Processing performace of PVC Ceiling Tiles:
Can be processed by drilling, sawing, nailing, planning and bonding and be in hot-forming, hot-bending and hot-folding and be welded and bonded with supplementary materials.
Main Characteristic of PVC Ceiling Tiles:
Water proof and suitable for both wet and dry areas
Interlocking system, DIY supported
Simple and efficient to install and clean
Long life time
Healthy and environmentally friendly
Variety of colors and patterns for decoration
Application Areas of PVC Ceiling Tiles:
Bathrooms, Kitchens, Factories, Workshops, Warehouses...
- Q:Density board and PVC which expensive
- The same specifications PVC expensive
- Q:Is PVC material discolored? Decoration with PVC skirting board will have any problems?
- PVC color is added to the material in the paint, some of the surface of the product attached to a film
- Q:Chevrolet board and wood-plastic plate difference
- Chevrolet board, also known as PVC foam board, the main material for the PVC, PVC is made through the extrusion after extrusion molding equipment. In order to increase its performance often add antioxidants, flame retardants and so on.
PVC wood-plastic plate, the main material for the PVC and wood flour, and PVC foam board production process is basically the same, but in the production process to control the degree of foam, and fully mixed with wood flour. In order to increase its performance, also need to add antioxidants, flame retardants and so on.
The difference between the two, mainly reflected in the production of different raw materials.
But all have a nail, can be riveting, drillable, can be sawed similar to the characteristics of wood.
- Q:Shop on the ground PVC plastic plate soft PVC or hard PVC?
- Shop on the ground PVC plastic plate soft PVC, pvc plastic in the life of the application is very wide, used in various industries, PVC plastic classification:
PVC plastic can be divided into soft PVC and hard PVC. Which accounted for about 6/3 of the hard PVC plastic, soft PVC accounted for 1/3
Soft PVC plastic is generally used for flooring, ceilings and leather surface, but because soft PVC contains softener (which is the difference between soft PVC and hard PVC), easy to become brittle, easy to save, so its use has been limited.
Hard PVC does not contain softener, so flexible, easy to shape, not brittle, non-toxic and pollution-free, long storage time, so it has great development and application value.
The essence of PVC is a vacuum plastic film, used for all kinds of panel surface packaging, it is also known as decorative film, with film, used in building materials, packaging, medicine and many other industries.
- Q:How much is it?
- There is a good difference between the price is different, to see what you want
- Q:KT board and PVC board, as well as ABS board What is the difference between ah
- Kt board is polystyrene material (lunch box material) foam out of the plate, the biggest feature is the light mainly used for indoor advertising;
Pvc plate - also known as pvc foam board or Andy board, its chemical composition is polyvinyl chloride. Widely used in passenger cars, train car roof, box core layer, interior decoration board, building exterior panels, interior decoration board, office, residential, public places building compartment, commercial decoration rack, clean room board , Hot plate, special cold-keeping project, environmental protection board mold, sports equipment, breeding materials, and other materials, the use of anti-corrosion, , Beach water-proof facilities, water-resistant materials, art materials and a variety of lightweight partitions instead of glass ceiling. (The general plastic pipe with this material is called pvc but not foam)
ABS board ABS board ABS board is a new material in the sheet industry. Its full name is acrylonitrile / butadiene / styrene copolymer plate. English name Acrylonitrile-butdiene-styrene, is the largest production, the most widely used polymer. It will PS, SAN, BS various properties organically unified, both tough, hard, just equal balance of excellent mechanical properties. (Refrigerator, air conditioning these are used in this material)
Some nouns do not necessarily know what is written in brackets is usually easy to see you see, the main you really understand the
- Q:Leaking PVC Pipe in Basement Ceiling?
- its most likely a drain pipe that used to flow from a fixture on your first floor but the fixture was removed. The easiest way to fix this is to see if you can lift it up slightly so it runs the other direction and then strap it in place. However this could break a connection further down if the pipe is old. The other option is to either cut off the end and put a new end cap on it (clean it and apply PVC glue) or determine where it connects to the main drain and cut and cap it there and remove the 'dead' pipe, that way it isn't just hanging out waiting to get hit with someones head and broken. btw, I'm assuming this pipe is whiteish and at least 1.5 inches in diameter. if it's not then it will probably be something else.
- Q:How to deal with matte PVC mat noodles
- There is a flat-type portable polishing machine, fitted with coarse sand skin planing look like
- Q:Pvc board to do the props hard, I want to do cos props
- PVC can be divided into: general-purpose PVC resin, high degree of polymerization PVC resin resin, cross-linked PVC resin. General type PVC resin is formed by polymerization of vinyl chloride monomer under the action of initiator. High polymerization degree PVC resin resin is formed by polymerization of vinyl chloride monomer under the action of initiator; high degree of polymerization refers to vinyl chloride monomer Polymerization resin is added in the polymerization system. The crosslinked PVC resin is a resin obtained by adding a chain extender in the vinyl chloride monomer polymerization system. So PVC made of props or have a certain degree of hardness, tube network prompts you: in the wear must be careful not to hurt the skin
- Q:I plant processing acrylic board PVC foam board KT board sun board PVC board acrylic board
- Not processing PC board ah, we process PC board, you can exchange
PEANUT was founded in 1998,the main product are pvc panels and 100% waterproof pvc flooring.The width of its pvc panels range from 8cm to 61cm, Surface finishing includes hotstamping, lamination, curtain coating and roller printing.After almost 2 decades' hardwork and efforts, Its monthly production capacity of pvc panel has reached 450,000m2. It stands out among its peers for its fine technique, advanced quality managing systerm and experienced staff members.
1. Manufacturer Overview
|Annual Output Value
||US$1.5 Million - US$2 Million
||ISO 9001:2000 certificate
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||18800 square meters
|No. of Production Lines
||OEM Service Offered;Design Service Offered;Buyer Label Offered
|Product Price Range