|Place of Origin:|
Zhejiang, China (Mainland)
|Ceiling Tile Shape:|
|Ceiling Tile Type:|
|Color and Designs:|
Hundreds of designs for your chooes,or according to your designs
ISO9001:2008, SONCAP CERTIFICATE
|Packaging Details:||PVC Shrink-film or PE-Film or Cartons, 10PCS/bale or according to per customers' requirements|
|Delivery Detail:||10-15days(20GP),15~20 days(40HQ)|
Laminated pvc wall panel
2)Surface treatment:laminated printing
3)16 production lines
· Can we make an OEM order?
o We can offer or supply goods as customers' requirements.
· How can I get some samples? Free or not?
o We can send some normal samples, absolutely free.
· How does your factory do regarding quality control?
o "Quality is priority." We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 , SGS authentication, CE for Europe, etc.
- Q:Pvc board how how sticky cement wall
- Direct sticky cement wall is not strong, it should add a layer of isolation board, playing a bottom, with structural glue can stick
- Q:Density board and PVC which expensive
- Normal is PVC expensive, but here there are many limited conditions
There are many kinds of PVC, MDF there are many kinds, such as thickness, density and so on
High density board general prices are relatively high, and low formaldehyde content of the floor price higher, such as to reach the E0 level
So there are specific problems specific analysis
- Q:PVC floor cleaning what to pay attention to, choose a professional team have it?
- This is not necessary But usually do need some maintenance.
1) daily maintenance: the use of clean wet mop clean the ground, the serious pollution to the local clean;
2) month maintenance: the whole site to clean the dust after the depth of waxing treatment better conservation;
3) pollution treatment: PVC plastic sports floor stains on the ink, food, greasy and other stains, to immediately carefully wipe the stains, and then use a diluted detergent scrub traces of residual black leather shoes can be difficult to remove the use of Hao Kang Special cleaning agent veil wet or rinse with rosin water, not the detergent or rosin on the floor clean, scrub to make wax conservation;
4) chemical protection: to avoid a lot of water for a long time to stay on the floor surface, the water for a long time soaking the floor, may be deep under the floor to make the floor glue to melt the loss of adhesion, may also make the floor surface protection wax water layer caused by floor Pollution, may also contaminate into the floor caused by floor discoloration;
5) Daylight protection: to avoid direct light exposure, to prevent ultraviolet radiation, causing discoloration, fading.
1) is strictly prohibited to wear shoes, high heels or easy to play the color of the shoes;
2) cutting is strictly prohibited, the surface should not be rubbed with a hard object, so as not to damage or rupture;
3) is strictly prohibited in the floor using acid, alkali and other corrosive chemicals and away from fire, high temperature to avoid deformation of the floor;
4) When carrying goods is prohibited in the ground drag, so as not to scratch the floor.
- Q:What is the size of the pvc board?
- You said the PVC board should be 410 * 510 or 400 * 500 specifications, because the cut will not be so accurate, so more than a few millimeters margin. Thickness of 5 mm, then the volume of 417 * 512 * 5 is about 0.001 cubic meters, depending on the weight of calcium relative to the relative density of 1300 kg per cubic meter, that is, the weight of 1.3 kg. PVC raw material costs plus processing fees and other profits of about 10,000 per ton. Then each piece of the price of about 13 yuan per kilogram. If it is by 400 wide, 0.25 yuan per cent, 50 cm long, 12.5 per block, is reasonable. In turn push, that is, more than 9,000 tons per ton of finished products. It may be poor quality board, 500 wide, each 10 dollars, more than 7 thousand per ton, is the recovery of a lot of calcium carbonate to do.
- Q:Pvc polymer composite board about how much money? Is calculated in meters? Or square?
- According to the new material, back to the material, color, weight, quality and other prices are different, as the kg or square price can be calculated to see the specific needs of customers, in fact, can be converted, are the same.
- Q:PVC board paint blistering
- Due to the high temperature of the bubble.
1, the product is ready to be placed after cooling for two to three days, not sun exposure or baking at high temperatures.
2, blistering, paint is a common common defects. Which is sometimes dry, sometimes liquid. Foaming is large and small, shape hemispherical. The size is usually related to the strength of the adhesion of the substrate, or the bond strength between the coatings, and the pressure within the bubble or blister
3, if the bubble continues to the substrate: should find ways to eliminate the source of moisture, repair loose caulking glue, consider installing the exhaust fan, remove the bubbles. If the bubble does not extend to the substrate: the bubbles should be scraped off, and then polished, any must be on the primer, and finally re-coating high-quality paint.
- Q:What materials can be used to make building models?
- Generally with ABS board, pvc board, acrylic, plexiglass, it is recommended to buy engraving sculpture, the first glue is better, you can buy imported plastic.
- Q:What are the hospital wall decoration materials?
- Traditional materials are: tiles, wall paint, pvc plate, etc., these materials are more or less there are some shortcomings, such as easy fouling, dust, easy to clean, maintenance, short life and so on.
New materials are: safe disinfection board, antibacterial coatings, etc., which "safe disinfection board" comprehensive performance, wall decoration effect is more prominent, but also play a role in antibacterial, antibacterial, is now the mainstream of hospital decoration materials one.
- Q:Finished pvc board how to install the kitchen led lights
- Open a hole, then a good line, fitted with lights, card buckle. Installed.
- Q:PVC plastic plate dirty how can quickly wipe clean?
- With a clean cloth, dip a little acetone wipe, once and after. You try, we are all so high
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range