1) High efficiency
2) Quickly Response
3) Strong load compatibility & stability
4) Over-current & short-circuit protection
5) Built-in fuse
6 ) Low voltage & overload protection
7) Small profile, light weight, green sound
12V or 24V
Low voltage range
High voltage range
(220V±10% or 110V±10%) changeable
Modified sine wave
Outside box Dimension(cm)
- Q:Is the inverter output current proportional to the output torque?
- The output voltage of the inverter is proportional to the frequency, which is to keep the motor flux constant, T = KIφ so the motor output torque is proportional to the inverter current.
- Q:Asus notebook power adapter how to open
- Hi respectful ASUS users
The power adapter can not be disassembled, and if your machine's power adapter is faulty, you can go to the local service center for testing.
- Q:How can a variable speed multi - speed three - phase asynchronous motor be controlled by a frequency converter?
- Yes, but it is not necessary, if it is old motor that is another matter, tell you that you can use, but can not be in the frequency conversion process for the pole, this will cause the inverter protection or failure
- Q:The inverter flat rate transferred to 29, on the submersible pump to burn the coil ?!
- The following describes the selection of the inverter Note: The inverter selection is mainly driven by the load characteristics and the actual motor current to set, in addition, there are the following precautions.
1, the environment: for some high temperature (higher than 50 degrees), high altitude (more than 1000 meters) of the application, the inverter selection should be appropriate to leave a margin to ensure that the inverter and motor life.
2, distance: the location of the inverter installation and drive the distance between the motor more than 50 meters, the frequency changer selection should cooperate with the reactor to reduce the carrier frequency.
3, a drag: a drive drag more than one motor, if the middle of the cable is too long, universal inverter selection will enlarge the use of a file, and each machine should be installed behind the fuse.
- Q:Pump frequency converter instantaneous restart and restart the problem
- Speed tracking start, with them better. Speed search time is less than the free downtime, not too small too much, will be over-voltage protection.
I do not understand and contact me. Your inverter voltage level, manufacturers.
- Q:55 瓩 4 pole motor with a frequency of one hour can save much electricity
- it is used in the fan pump load can save about 14-22 kWh, used in the general category, on Multiply your number by 55.
- Q:How do I select a drive? Which brand is better
- 4, when the inverter is used to control several motors in parallel, be sure to consider the inverter to the motor cable length of the sum of the inverter in the allowable range. If you exceed the specified value, to enlarge one or two steps to select the inverter. In addition, in this case, the inverter control mode can only be V / F control mode, and the inverter can not protect the motor over-current, overload protection, this time in each motor on the fuse to achieve protection.
5, for some special applications, such as high ambient temperature, high switching frequency, high altitude, etc., this time will cause the inverter derating, the inverter need to enlarge a file selection.
6, the use of inverter control high-speed motor, due to high-speed motor reactance small, high harmonics also increase the output current value. Therefore, when selecting a frequency converter for a high-speed motor, it should be slightly larger than the inverter of an ordinary motor.
7, the inverter for the variable pole motor, should pay full attention to select the inverter capacity, so that the maximum rated current in the inverter rated output current below. In addition, in the operation of the number of pole conversion, you should first stop the motor work, otherwise it will cause the motor idling, bad will cause damage to the inverter.
- Q:Do you want to pay attention to the number of poles of the motor when selecting the inverter?
- Inverter selection is mainly to see the power, and then pay attention to voltage problems.
Finally look at what your motor is carrying.
- Q:Fuji inverter motor set the number of poles will not have any effect?
- The number of motor poles set incorrectly, self-learning when the motor parameters are not correct, not the correct parameters of the motor. Inverter control speed is not accurate, and the motor will heat, can not work properly.
- Q:2 pole 0.75 kW motor can increase the speed through the inverter?
- if the 4-pole motor to rise to 2-pole motor frequency, The frequency of the motor rises to about 100 Hz, which is easy to implement for the frequency converter.
Our products have obtained CE, FCC and RoHS and other certificates. With professional skills and technology, our monthly production capacity is 100,000 units. We have a strict quality control system to ensure that you receive qualified products. "Creativity and Sincerity" is our tenet. We sincerely hope to cooperate with customers from all over the world.
1. Manufacturer Overview
||Shenzhen, Guangdong, China (Mainland)
|Annual Output Value
||Below US$1 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||Below 1,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range