plastic sheet extrusion machine production line , pvc board production line , pvc decoration sheet production line:
PVC/WPC Free Foamed Sheet Production Line
Professional manufacture with more than 10 years experience.
High output , low consumption
plastic sheet extrusion machine production line , pvc board production line , pvc decoration sheet production line
The plastic plate and sheet extrusion line is specially designed for the extrusion of single layer or multi-layer plate and sheef of PC or PMMA. It is also suitable for the sheet extrusion of PE , PP, PS, ABS and other materials.
The international famous components, combined with decades of year’s experience in the plastic machinery industry, make the whole production line more perfect, reliable and steady.
Product Technical Parameters:
Main motor power(KW)
Designed extrusion output(KG/H)
Send a message to us:
Q:1: what is the difference between an extruder and an injection molding machine?
1: extruder, is threaded through the push rod, the plastic die forming process by melting in the forward process. After the extruder products are silk, belt, tube, plate, etc.
Q:Who knows the structure of the big extrusion machine head (has cooled), smash what structure, model of plastic crusher?
How big is it? Not too big. I suggest using a 40 or 30 too big block. You have to use a special break knot.
Q:What is the principle of the 45 extruder machine?
The principle of the extruder is the theoretical process of heating, melting and mixing in the process of plastic conveying, including solid conveying principle, melt transportation principle, mixing principle, and solid bed crushing process, etc..
Q:Why will the extruder frequency shift stop?
Because the frequency converter is out of order, you can look at the fault record parameters of the inverter.
Q:Which converter is suitable for extrusion machine 5
Proposed Delta VFD-cp Series ~!AskCP2000 is constant pressure water supply... Are you sure you can use it? And C2000 is better than qualifiedChasing the answerWrong number ~ ~ should be C2000, and VE Series ~ ~ these two are suitable, ~~B, CP is not good ~!
Q:Cable extrusion machine 6.57090 machine model how to see, know the master to say, thank you
Cable extruder type 657090 machine, describes the diameter of the screw, the unit is mm.The greater the number, the greater the equipment, the greater the amount of gumIt is usually marked on the control cabinet of the equipment
Q:How to choose the mould of the cable extruder? Ten
Depending on your specific specifications, if XLPE is insulated, extrusion die with small touch line, set on the use of cable diameter, large core conductor than a few tenths of good, if you like to use 70 square tube extruding mold insulation of the conductor element some is big 1 can be set according to the touch, the tensile ratio calculation,
Q:The working principle of an extruder
What is the working principle of an extruder?:Screw with specific shape,Turn in a heated barrel,It will be delivered from the hopperThe plastic is pressed forward, allowing the plastics to be uniformly plasticized (i.e., melted)Through the head and different shapes of the mold, the plastic extrusionA continuous plastic layer of various shapes, extruded on the core and cable.
Q:Does anyone know the operating procedures for the cable 65+120 extruder?
What are the operating specifications for the extruder?One is the equipment instructionTwo is the boot operation specificationsThree is safety instructions and so onThe equipment manufacturer will provide the above
Q:Comparison of injection molding machines and Extruders
Considerations for extruder use:1, extrusion machine is running forward, avoid reverse2, avoid fasting operation, must heat engine feeding operation, so that can avoid sticking bar (holding shaft) phenomenon3, the extruder inlet, vent hole is strictly prohibited access to iron and other miscellaneous, so as not to cause accidents, affect production4, safe use of electricity, grounding wire5. When the machine is running, it is forbidden to touch the rotating parts such as the material inlet, the material outlet, the belt, the gear and so on6, before using the machine should be injected with lubricating oil, so as not to cause damage to the machineSince the extruder as one of the three synthetic plastic material since the advent of rapid development.