PRODUCT NAME:Self-propelled aerial working platform PST230
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | PST230 | |
Working height | m | 22.5 |
Platform height | m | 20.5 |
Platform capacity | kg | 200 |
Platform dimensions(L*W*H) | m | 1.2×0.8×1.1 |
Working radius(capacity 200kg) | m | 9.7 |
Working radius(capacity 80kg) | m | 11.3 |
Cage rotation angle | 180° | |
Forearm rotation angle | 180° | |
Rotation angle | 450° | |
Length | m | 6.1 |
Width | m | 1.49 |
Height | m | 1.98 |
NW | kg | 2900 |
Outrigger size | m | 4.19 |
Gradient ability | 30% | |
Working gradient | 17% | |
Pressure on earth(working) | Kn/㎡ | 1.39 |
Pressure on earth(traveling) | Kn/㎡ | 2.2 |
Max travel speed | km/h | 1.5 |
Range of wireless remote control | m | option |
Motor | Diesel+220V |
1.delicate shape, Rubber track has little pressure on earth, it can travel on any ground, eg.marble floor
2. The height and width of track is adjustable, it can travel on any unevenness road.(option)
3.pivot turn; big arm and forearm are retractable
4.hydraulic outrigger can control separately, self-level(option)
5.advanced alarm system protect machine work in the stable situation
6.avoid obstacle, work in the narrow place or gradient road
7.cage can tilt 180 degrees
8.Small when it retracts,nimble,the height of stowed situation is 1.98m
9.100M wireless remote control(option)
10.Cage can start or shut the machine
11.three types of working mode: self-propelled,truck-type and pull-type
12. emergency stop device and overloadd protection
13. state indication,alarm and limitation
14.walk,main arm lift, main arm stretch,rotating floor tilt;working arm lift has function of buffer delay, protecting against shock
15.Emengency operating system
16.advanced torque control
17.special type high strength material
18.The height and width of track is adjustable, it can travel on any unevenness road
19.double computer control,find mistake itself, LCD shows fault code(below 26m )
20.FUZZY control technology,precisely move(below 26m)
21.concentric stretch technology
22.Power hydraulic proportion control
23.All cylinders have hydraulic locks, safe even if the cylinder is broken
24.Emengency descending system
- Q:I don't know which to do. What advances better? Also i would plan on trying to get into OCS before im 34 and be an officer in one of these jobs, which one?
- Storekeeper is logistics quartermaster, and there is always room for growth and promotion in logistics, especially for an officer. I would move fast, however, if you're approaching the age cap, because no age waivers are being given. Also, your MOS will depend heavily on your ASVAB.
- Q:In what ways did the increased use of machinery affect workers and working conditions?
- Workers production increased a thousand-fold
- Q:Does using a Tractor or other type of machinery in FarmVille still get me Experience and Mastery Pts?
- you okorder /
- Q:I would like to start building some home projects and do small crafts, maybe work on some small furniture projects. I would like this to last me a long time.
- Delta makes some great tools. Problem with most newer tools is that they went from cast iron tables to aluminum. This causes more vibration since it is lighter. Even a great saw is no better than the cutting tools used on them, so make sure you buy premium blades.. I think you will be very happy for a long time with the Delta.
- Q:Hi, could someone explain what are the basic machinery and process required for mining and processing coal?.Something that would support a lower capital investment as opposed to what big multinationals can afford.Even your business ideas on mining is welcomed.thank you
- Strip mining? underground mining: drift or shaft? Horizontal seams or vertical seams? The nature of the coal deposit is a major factor. As is host nation mining laws, carbon content, seam height etc. I would need more data to give you a comprehensive answer as there are many types of coal mining operations. It was done for years with a pick axe and bucket--someplaces it still is. Today where long wall mining is the most efficient. Some are using robots to go back over coal mined 100 years ago to remove gangue/non coal content.
- Q:Tire repairing machine for engineering machinery
- Tire specifications: specifications are geometric data of tire parameters and physical properties. The tire specifications are usually represented by a set of figures. The first figure represents the width of the section of the tyre, and the latter figure represents the diameter of the rims. They are measured in inches. The middle letters or symbols have special meanings: "X" means high pressure tyres; "R" and "Z" represent radial tyres; "1" means low pressure tyres.
- Q:shanghai shibang machinery
- I'm okorder with any more questions.
- Q:i have this engine on a go cart and i just want to know how much the motor is worth. thanks
- England or united states of america of united statesa..??Twelve 12 months previous boiler would decide on a sturdy cleansing and a song up..it may well be ok..The water tank, if I understand what you say, is an electric water heater..? despite if it is it must be getting drained. If the climate are long previous( there are 2 of them) you will get some warm and then cool water. while you're on hand you may replace them your self..They fee approximately 12 to $15 each. they have the two 4 nuts protecting them in or one vast (a million a million/4) +/-hexagon good on it to get rid of it....close OFF the ability, get rid of the wires ( from one) returned out the unit out counter clock clever. placed pipe thread compound on the threads and reinstall. Then do the 2nd..One hours artwork..do no longer screw with the boiler. Ask around for a functional burner guy to do your boiler. In England, i've got faith, the comparable strategies prepare..added explaination: If one element is lifeless the tank won't shelter temp. in case you do one do 2. it is going to keep you attempting to harass shoot the heater. Too complicated to describe...
- Q:My dad likes machines, has been a machinist for pretty much forever.He works VERY hard-( on his feet most of the time.No air-conditioner.Long hours.etc ).
- No, but the love of mechanical things and how they work is what keeps us going.
- Q:What about mechanical and electrical engineering? Employment direction? Employment prospects?
- Graduates can go to all kinds of machinery design and manufacturing enterprises, electronic and electrical enterprises and other production departments, companies, like you, confused, looking forward to the answer, I also learn this, which school you have, employment is very wide,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PRODUCT NAME:Self-propelled aerial working platform PST230
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords