Prime Quality Tinplate Sheets for DR8 Temper

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
25 m.t.
Supply Capability:
8000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Structure  Description

Electrolytic Tinplate Sheets is one of the metal packing materials, which is widely used for making painting cans ,chemical package cans , electrical cable ,battery and metal printing etc.

2. Main Features

Steady and high quality

Fast shipment

Good experience for export work

For the surface, Plate uniform in thickness,uniform and smooth tin coating, without flaws,rusts,scratch,wave,nick of tin coating etc.

Price competitive

3.Images

 

 Electrolytic Tinplate Sheets for 0.26 Thickness SPCC

 

4. Specification

 Standard : GB2520-2000 ,JIS G3303

 Steel type : SPCC,MR

 Coating : 2.8/2.8

 Surface: Bright, Stone ,

 Thickness:0.26

 Width :600MM~1000MM

 Temper : T1~T5,DR8

 Package: tinplate wrapped completely with an inner cover of plastic or waterproof papers with vorners protected with metal angels.

 5.FAQ 

 A. What is the package of tinplate? (Referred as below)

For sheets, thin plastic film + rust-proof paper + metallic cover + metallic angles+ steel band strips + fumigated wooden pallet.

For coil, thin plastic film + rust proof paper + metallic cover + steel band strips + fumigated wooden pallet

B. The surface of tinplate could you supply?

Stone finish, Bright finish, Matte finish, Silver finish

C.  What quantity is the minimum order of tinplate?

Usually, the minimum quantity is 25MT. For special case, consult with us.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Tinplate why have white and yellow, tin plating should be white ah, yellow is how to return a responsibility?
Tinplate itself is no color, it is iron color.
Q:How big is the difference between tinplate and stainless steel 316L?
It will be the steel strength and formability and corrosion resistance of tin soldering, and beautiful appearance with a material, corrosion resistant, non-toxic, high strength and good ductility properties.
Q:How to test the tightness of tin metal cans?
Pressure leakage test with a rubber plug when empty hole plugged, start the air compressor, slowly open the valve, the pressure in the tank is increased gradually, while the empty tank is immersed in the water tank, careful observation with outer bottom cover curling and welding seam has no air bubbles, until the pressure rose to 0.7jg/cm and 2min. All the same parts of continuous bubbles, should be judged as leakage, leakage of the recording time and pressure, and mark in the leak site on.
Q:Can tinplate be used as a water tower? Is hot water durable?
Tinplate is commonly known as tin plated thin steel plate. It is a cold-rolled low carbon steel sheet or strip coated with pure tin on both sides. Tin plays a major role in preventing corrosion and rusting.
Q:Soup with tin cans loaded also need high temperature sterilization?
If you are a start-up factory, you need to save money, you can choose a small sterilization pot, covering an area of small, heat source is also very good solution.
Q:What is the process of two cold rolling of tinplate?
Tinplate is commonly known as tin plated steel sheet. The English abbreviation is SPTE. It is a cold-rolled low carbon steel sheet or strip coated with commercially pure tin on both sides.
Q:What are the differences in the corrosion behavior of two ferrous iron products?
The name "tinplate" is not exact. Therefore, in 1973, when the Chinese tin plate meeting was called "tinplate", the official document no longer used the name "tinplate".
Q:How can tinplate be identified?
The quality of tinplate is related to the final use.
Q:Who can tell me how to adjust the roller seal defects?
In the sealing device, the roll sealing roller, the upper pressure head tray, usually referred to as sealing three elements. The correct groove shape of the roller, the reasonable position of the head and the proper driving force of the tray support are the necessary conditions to ensure the normal roll sealing. (see Fig. 1) it is easy to see that the three elements of the seal are the basic components of the sealing device and are also a fundamental factor affecting the double hemming.
Q:Tinned iron and iron matte tin in difference
Tin tin in tin and iron is ordinary, the price is cheaper than the frosted iron, no sand surface, at the grassroots level printed on a white layer after printing all kinds of exquisite patterns, but also can do all kinds of gold silver transparent iron printing, in the light can return the light, give a person a kind of dazzling feeling also, high-grade, affordable prices, so the tinned iron printing packing made by wide customers.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range