pressure balance Expansion Joints Absorb large axial displacement between straight tube and support frame,eliminate the pipeline
pressure balance compensator
Expansion Joints Features
1. Expansion Joints To Absorb large axial displacement between straight tube and support frame , and small horizontal displacement;
2. To resolve minor deviation because of piping connection and eliminate the pipeline residual stress;
3. Easy cleaning and maintenance.
Applications For the chemical industry, metallurgy, electricity, shipbuilding, construction and other industries.
Application temperature-50 300.
SUS304/316L / SS400
Flange standards are based on JIS, ANSI, DIN, BS, JB, and other standards.
Bellows are manufactured on the basis of the U.S. manufacturing expansion joint manufacturers association standards and can work after more than 10 ³ cycle experiments.
Production size: Ø40mm-Ø7000mm
- Q:Can the sleeve type pipe joint be disassembled and assembled several times?
- The European and American card sleeve pipe joint is a standard part, it can be disassembled and assembled many times, but it is better to check the sealing cone into the pipe, whether the inner component has the wrong face, the pipe is better to choose the new connection.
- Q:Will the moving angle of the air conditioner indoor be harmful to the connecting pipe joint?
- There's nothing wrong with the moving angle. Our unit air conditioning because moving, we have been disassembled and assembled several times (copper tubes are disk, installation and then stroke straight), there is no leakage problems.
- Q:Stainless steel pipe, wire joint leakage how to make up?
- What is the pressure in the pipe? The glue material is not blocked up, in the humid environment and water under the condition that the glue is not stick, reliable and economic way: cold metal flux were patching, simple and convenient, do not need what tools
- Q:Drawing design, drain cross dry pipe is flexible cast iron pipe, vertical pipe is PVC pipe joint
- Yes, there is one more question. How does the cast iron connect with the PVC? It doesn't leak. It's also a problem.The impact force does not matter, PVC three all have it should have a radian cushioning effect, can also be used in spiral PVC tube ah, although it is quiet, but also can ease the impact. I think it's hard to interface cast iron with PVC.
- Q:Press the hydraulic pipe fittings standard need to do what procedures
- Press with 19mm four layer steel wire hose (Italy Manul manuli4sp) from the hydraulic tubing buckling parameters in the table look up with four layers of 19mm steel wire hose joint diameter is 37mm before pressing coat, rubber 33.5mm, the die diameter is phi 33mm,
- Q:How do I distinguish the rigid clamp joint and the flexible clamp joint from the outward appearance?
- Length and thickness of flexible clamps.Clamp itself difference:Flexible and rigid joints of the same specifications: width is different, flexibility is wider than rigidity 2MM (take 159 clamps as an example)
- Q:Is the thread at the two ends of the card sleeve the same?
- Sleeve type pipe joint sealing pipe joint is applicable to oil, water, gas and other non corrosive or corrosive medium, with plastic pipe specifications are flexible, and pipeline connection, has the characteristics of reliable connection, good sealing performance, so it is widely used in oil refining, chemical industry, light industry, textile, defense, metallurgy, aviation, shipbuilding and other systems; also suitable for hydraulic transmission of various mechanical engineering, machine tools and other equipment pipeline.
- Q:110 degree PVC pipe joint
- Hello, you can use PVC two to a 45 degree elbow three back, try on the line, 35 meters of pipe according to the 1% grade to install, depends on the specific circumstances if the flow rate is larger and with construction conditions if the proposed slope is a little bigger. (personally) I don't think it's necessary to install it with stainless steel pipe
- Q:Specification for thread of gas couplings
- 1, the trachea quick change joints, referred to as pneumatic joints.2, pneumatic connectors have foreign brands and domestic brands.
- Q:What are the differences between hydraulic couplings and fittings and elbows?
- The hydraulic pipe connection includes hose joint and steel pipe jointThe connector body does not include the nut clamp. There are straight through fittings, elbows, and 45 degree joints, etc..Elbows generally refer to joints of 90 degreesMy side is to do this piece, the United States PARKER Parker imported hydraulic hose, joints, quick connectorThere's contact information in the comments, thank you!
Our products are of advanced design, rational structure, stable performance, and flexible and high anti-fatigue properties. With our quality assurance system, we improve comprehensive test means and attain the ISO9001 quality system certification and pressure pipe component production license.
1. Manufacturer Overview
||Jiangsu, China (Mainland)
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||5,000-10,000 square meters
|No. of Production Lines
||OEM Service Offered Buyer Label Offered
|Product Price Range