Prepainted Aluminum Zinc Rolled Coil for Construction

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
25 m.t.
Supply Capability:
30000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Structure of Aluminum Zinc Rolled Coil

 Prepainted Aluminum Zinc Rolled Coil for Construction

Description of Aluminum Zinc Rolled Coil
Aluminum zinc coils is a kind of coated steel coil/sheet. With the cold rolled steel of different strength and thickness as substrate, it is produced through applying Al-Zn coat on both faces by hot dip process. In its coating, Al accounts for about 55%, Si 1.6%, while the remaining is Zn. Aluminum zinc coils enjoys both the physical protective feature and durability of Al and the electrochemical protective property of Zn. And its surface has bright silver color and regular embossed-like figure, which are highly decorative. 

 

Main Feature of Aluminum Zinc Rolled Coil for Construction Roof

1.Corrosion resistance: It mainly depends on the aluminum protection. When the zinc being worn, the aluminum will  form a dense layer of aluminum oxide, resist corrosion material to prevent further corrosion inside. 
2. Heat resistance: Aluminum zinc alloy steel sheet has excellent heat resistance, can withstand high temperatures over 300 centigrade, and is similar with aluminized steel high temperature oxidation resistance. It often used in chimney pipes, ovens, fluorescent lighting device and the device cover. 
3. Heat reflective: Galvanized steel plate heat-reflective high rate is twice as galvanized steel, often used to make insulation materials. 
4. Economy: Because density of 55% AL-Zn is smaller than the density of Zn, so in the same weight and thickness of Galvanized zinc layer, aluminum-zinc steel plate is larger area more than 3% of galvanized steel sheet. 

 

Applications of Aluminum Zinc Rolled Coil for Construction Roof
1. Construction and building: roofing; ventilating duct; handrail; partition panel;etc.

2. Electric appliance: refrigerator; washing machine; refrigerator; DVD;etc.

3.Transportation: oil tank; road sign; etc.
4.Agriculture:barn; etc.

5.Others:vending machine; game machine; etc.  

 

Prepainted Aluminum Zinc Rolled Coil for Construction Images

 

Prepainted Aluminum Zinc Rolled Coil for Construction

Prepainted Aluminum Zinc Rolled Coil for Construction

 

Specifications of Prepainted Aluminum Zinc Rolled Coil for Construction 

Chemical Composition

GRADE

C

Si

Mn

P

S

Ti

SGCC/DX51D+Z

≤0.10

≤0.50

≤0.60

≤0.10

≤0.030

≤0.020

DX52D+Z

≤0.10

≤0.50

≤0.60

≤0.10

≤0.030

≤0.020

SGCD/DX53D+Z

≤0.10

≤0.30

≤0.50

≤0.05

≤0.030

≤0.020

SGCE/DX54D+Z

≤0.10

≤0.30

≤0.30

≤0.03

≤0.020

≤0.020

DX56D+Z

≤0.10

≤0.30

≤0.30

≤0.03

≤0.020

≤0.020

Structural

≤0.20

≤0.60

≤1.70

≤0.10

≤0.045

Mechanical Properties

GRADE

Yield Strength MPa

Tensile Strength MPa

Elongation %

SGCC(DX51D+Z)

≥205

≥270

-

SGCD(DX53D+Z)

-

≥270

38

SGCE(DX54D+Z)

-

≥270

40

DX56D+Z

-

≥270

42

 

FAQ of Prepainted Aluminum Zinc Rolled Coil for Construction

We have organized several common questions for our clients,may help you sincerely: 

1. What is the minimum order quantity ?  

Our MOQ is 50mt for each size. And we will consider to give more discount if you make big order like 1000 tons and more. Further more, the more appropriate payment term your offer the better price we can provide. 

2. How long can we receive the product after purchase?

Usually within thirty working days after receiving buyer’s advance payment or LC. We will arrange the factory manufacturing as soon as possible. The cargo readiness usually takes 15-25 days, but the shipment will depend on the vessel situation.

3. How to guarantee the quality of the products?

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Remington 870 wingmaster steel shot duck hunting?
A full choke is not recommended for most steel shot. That gun was made before steel shot was popular and the barrel probably will not hold up to the hard steel shot. You have two options. Both will cost money. You can get the soft heavy shot and use that. Or you can buy a newer shotgun and use steel in it.
Q:Runescape mithril vs. steel smithing?
i think steel
Q:Is a knife with damascus steel better than one with regular steel? or what about high carbon?
It all depends on the steel. There are as many types of Damascus as you want to imagine. The old Damascus swords brought back by the Crusaders were far superior to the blades made in Europe at that time, but they probably wouldn't match up to modern steel in performance. Alas, it has been lost to history as to how they were made. Back to modern times. Damascus can be homogeneous steel with the pattern hammered in (hammered steel) or layered (pattern welded) or any number of variations. I make many blades out of crane cable, the pattern is nice and the strength is superior to all others. Layered damascus, done correctly, can have what is called the Damascus cutting effect (DCE). These knives are rare and expensive. The best layered blades are made of high carbon steels of various alloy content. I just recently finished a low count blade made of L-6 and a file (W-1), these offer exceptional edge holding. Factory blades are often not worth buying unless you like pretty knives. I personally make mine to be used. I could write a book on the subject, but others already have. In the end a knife is as only as good as the heat treating, good steel with a bad heat treat will not perform as well as lower quality steel done properly.
Q:Handgun steel question...?
The chrome moly alloy used in blued steel guns is the strongest thing out there today. Stainless guns sacrifice a little in strength in exchange for their rust resistance. Every maker has their own special alloys for various parts as well as proprietary techniques for hardening and tempering depending on the use a part will be put to. Keep in mind that the harder you make steel the more brittle it becomes. Especially true in knife blades also. A custom knife blade could be made much harder than they are, but would shatter under hard use.
Q:Does mild steel have a high carbon content?
Bazza is heading in the right route yet time fogs the remember for us all. cut back small try samples off the inventory bar say pound coin thickness. warmth cherry purple and quick quench in water. The intense carbon metallic will be hardened so puzzling to scratch even as gentle scratches genuinely utilising a drill element or hacksaw blade. That warmth treatment will go away the metallic in its toughest maximum brittle state so will carry an edge yet snap like a carrot. So having hardened your merchandise it can be tempered to get rid of a few hardness and presented toughness. So the compromise is difficult adequate to carry the edge yet difficult adequate to deflect sensibly without fracture. Swot up on mood colors/warmth treatment and practice on scrap. an exciting litte exercising i have used with apprentices contained in the previous is to take an old document and anneal (melt) it so it drills or takes a said cut back genuinely then re harden it so it files back. The tang will be got here upon harder than the blade though it is the same metallic. note the tang will be bent without snapping. For practice you are able to harden the tang so it snaps common. in simple terms by how scrap chilly chisels, drill bits, files etc are in simple terms the metallic you want and recycleable by forging and warm temperature teatment. i think a Samurai second drawing close!!!!! sturdy success
Q:are steel guitar strings ok? :)?
Classical okorder.com/... P.S Classical guitars are not limited to playing classical music but that is generally what they are used for.
Q:what types of stress require steel to be placed in footings?
Steel is always added to concrete to handle local 'tension' stresses. (Sometimes to provide extra compression in 'pre-stressed' applications, but the steel is still in tension.) Steel would be added to the lower section of footings to stiffen them to 'bridge' local 'soft spots' in the substrate.
Q:Steel Wool + 9V Battery Question...?
Steel Wool 9v Battery
Q:Acoustic Guitar Strings? Nylon vs. steel?
Listen to jwent You do NOT want to put steel strings on a nylon string guitar it will pull up the bridge, and top of the guitar, and break the plastic tuners that can't handle the extra tension You can put nylon a steel string guitar, but it won't sound like a classic guitar, because the steel string guitar has the extra bracing, to handle the tension of the steel strings, won't hurt anything, just won't sound as good If you want to soften the feel and sound of a steel string guitar, another option is silk n steel
Q:Chemical equation for steel?
This Site Might Help You. RE: Chemical equation for steel? What is the (balanced) chemical equation for steel?

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range