1.Precision Laser welding machine
2.imported British ceramic condenser cavity
3.300W laser power
4.for metal welding
Precision Laser welding machine
Precision Laser welding machine is high-energy laser beam coupled into the fiber, long-distance transmission, collimated by collimating lens for parallel rays, and then focused on the workpiece on the implementation of a laser welding equipment.
Inaccessible to the welding site, the implementation of flexible transfer of non-contact welding, with greater flexibility.
Laser beam can realize time and energy on the spectral, can also carry out multi-beam processing, in order to provide more sophisticated welding conditions
1. Optional CCD camera surveillance system to facilitate the observation and precise positioning.
2. Uniform energy distribution of spot welding with a welding characteristics required for the best spot.
3.Adapt to all kinds of complicated welding, spot welding a variety of devices, as well as less than 1mm thin seam welding.
4.British imports ceramic condenser cavity are employed ,corrosion resistance, high temperature,with a service life of 8-10 years,and the service life of the xenon lamp is over 8 million times.
5.Can be customized to automate fixture dedicated to achieve mass production of products.
Applied to optics, IT, medical, electronics, batteries, fiber-coupled devices, CRT electron gun,metal parts, cell phone vibration motors, clocks and watches precision parts, automotive and other precision steel welding.
- Q:Can the die laser welding machine weld copper and aluminum?
- Depends on what welding method:Any method of welding, welding copper and aluminum are not, so laser welding is not good! Because the welding time will produce copper and aluminum compounds, mechanical properties are poor.There are several methods for welding copper and aluminum: friction welding, diffusion welding and brazing.If laser brazing is used, copper and aluminum can be soldered.
- Q:What are the Zhongshan die laser welding machines?
- We have laser welding machines
- Q:How many high-power laser welding machines should be used to butt the 2mm stainless steel plate?
- Butt welding does not have to be completely welded to the 2MM, as long as the strength is enough. If you want to speed, just 300W!
- Q:Argon welder to imitate laser welding machine, which master can change?
- I let a Shanghai called green cold give me change, give them an old Ya welder also helped me inside the ash blow, several local line manage, good, is the front of the board size is not the same, their use is no matter anyway. Be careful, you'll start buying new machines, ignore him, and you'll just change it. Do not know is to pay the tuition fee, I is the magic for a long time, the other was promised to me.
- Q:Han Dynasty laser WF-300 laser welding machine manual
- 1, the model laser, users can choose large capacity capacitor box, so that the maximum laser pulse laser energy to 90J.The 2 type laser with average power continuous light users should be selected with 12.5KW integrated water cooling machine.3 optional thicker fiber listed in the list, with a maximum heart diameter of 1.0mm.4, as the product continues to update, all the configuration of the company's latest product manual shall prevail
- Q:What's the practicability of the laser welding machine for advertising characters?
- Fortunately, it should be mainly aimed at advertising word welding, simple, convenient and practical. The cost is low and the efficiency is high.
- Q:What are the advantages and disadvantages of laser welding machines? What areas are they applicable to?
- Advantage：The welding efficiency is high, the welding surface has no deformation, and the welding scrap rate is low.Shortcoming:Welded thin-walled materials,
- Q:What are the parameters such as current, pulse width, frequency and so on in the laser welding machine?
- Battery laser welding machine (YAG pulse laser welding machine), current, pulse width and frequency three parameters adjustment is explained as follows:1) if the current is increased, the pulse width and frequency remain the same, then the energy of the single point is increased, and the total laser output power is also increased;2) if the current and frequency remain the same, increase the pulse width, single point energy is also increased, the total laser output power is also increased;3) if the current and pulse width remain unchanged, the energy of the single point remains the same, and if the frequency is increased, the total laser output power is also increased;Increasing the current can increase the laser peak power output (can increase the laser penetration ability), increase the pulse width, can increase the output of single point laser energy. Laser average output power = single point energy X frequency.
- Q:Laser welding machine wiring on the assembly line to start half, has not fully started, why tripping?
- The starting current of the laser welding machine is large, and it starts at half of the time. Other auxiliary equipment also starts to start, and also needs large power. This may be the cause of the trip.
- Q:Is laser welding machine universal with laser cutting machine?
- Is not the same, laser cutting machine and laser welding machine is two kinds of different equipment, working principle is using laser energy, but not change the laser head on the dual thing, their optical path and parts are different. If anything else is unclear, please feel free to contact me at any time.
We have formed many product series , with specialized technical personnel, experienced management and clear development direction which guarantee the rapid growth in laser industry. We can provide customers with laser processing equipment and processing solution as well for our complete series of laser processing equipment production line. Our products have been widely applied to electical appliances, handsets, hardware, tools, parts, precision machinary, jewelries, glasses, clocks ,watches, Ics, craftwork gifts, plastic mold, medical instruments,etc.
1. Manufacturer Overview
||Guangdong, China (Mainland)
|Annual Output Value
||US$2.5 Million - US$5 Million
||ISO9001:2000 quality management system;Tax Registration Certificate(local tax); Model unit valuing quality and abiding by credit;Tax Registration Certificate(national tax)
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
||English, Chinese, Korean
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range