Prepainted Galvanized Steel Coil PPGI Steel Coil
1) Quality standard of Prepainted Galvanized Steel Coils: JIS G3312 CGCC & CGLCC
2) Grade of Prepainted Galvanized Steel Coils: CGCC and CGLCC
3) Hardness of Prepainted Galvanized Steel Coils: Both soft and hard quality are available
4) Surface finish of Prepainted Galvanized Steel Coils: With or without protect film
5) Thickness of Prepainted Galvanized Steel Coils: 0.14-1.20 mm
6) Width of Prepainted Galvanized Steel Coils: 914mm, 1000mm, 1220mm and 1250mm, width 600-1250mm is available
7) Finish by coil or sheet for Prepainted Galvanized Steel Coils: Both sheet and coil are available
8) Zinc coating of Prepainted Galvanized Steel Coils: 60-275G/M2, both sides
9) Paint thickness for top side of Pre-painted Galvanized Steel Coils: 5 micron primer + (10-20) microns modified polyester, any RAL color code.
10) Paint thickness for back side of Pre-painted Galvanized Steel Coils: (5-10) microns Epoxy
11) Weight per Pre-painted Galvanized Steel Coils: 4-6 tons, also can be upon customer's requirements
12) Max loading weight in one 20ft container for Pre-painted Galvanized Steel Coils: 25 tons generally
13) MOQ of prepainted steel coils: 25 tons for each item;
14) Actual shipping quantity of Pre-painted Galvanized Steel Coils: More or less 10% generally;
15) Delivery time for Galvanized Steel Coils: 15 days ganerally.
16) Applications of Galvanized Steel Coils: Widely used for roofs, outer walls, ovens, explosive-proof steel, electrically controlled cabinets, and industrial freezers in the residential and industrial buildings.
Color: RAL, or other series
Standard: JIS G3302, JIS G3312, ASTM A653M/A924M 1998
Prepainted Steel Coil Features Specifications:
Grade: Q195 - Q235 and 08AL, SPCC, SPCD, SPCE, 08.10.15, SGCC (DX51D+Z) SGCD(DX52D+Z) etc.
Surface treatment: Chromated, unoiled/oiled, bright finished, spangle, fingerprint resistance.
Surface protection: PE, PVDF, SMP, HDP, etc.
Thickness: 0.20mm-2.0mmWidth: 1000mm, 1200mm, 1250mm, 1500mm, or according to your request.
Zinc coating: 80g-275gsmcoil weight: 3-27 tons
Paint: Polyester silicon modified polyester, PVC sol, polyvinylidene chloride.
Exact Rate As Per Your Request.
We Attach Colour Card In Pic, So It Is For Your Reference.
5-7 mic. EP
According to RAL standard
Color-coated Galvanized Steel Coil (PPGI/ PPGL)
JIS G3302-1998, EN10142/10137, ASTM A653
TSGCC, TDX51D / TDX52D / TS250, 280GD
For general / drawing use
0.14-1.0mm(0.16-0.8mm is the most advantage thickness))
Type of coating:
PE, SMP, PVDF
Z60-150g/m2 or AZ40-100g/m2
5 mic. Primer + 15 mc. R. M. P.
508mm / 610mm
Properly packed for ocean freight exportation in 20' ' containers
Industrial panels, roofing and siding for painting / automobile
FOB, CFR, CIF
20%TT in advance+80% TT or irrevocable 80%L/C at sight
25 days after recepit of 20% TT
Insurance is all risks
MTC 3.1 will be handed on with shipping documents
We accept SGS certificatation test
- Q:is magnetic steel hygenic to produce stainless steel utensils?
- Magnetic steel rusts. That's why kitchenware is often made out of stainless. You can't turn magnetic steel into stainless, sorry. Metalurgy is a complicated subject, and is all about different alloys. It's far too involved to explain in a few paragraphs here, but no, they're not interchangeable in this case unless you want to produce kitchenware that rusts.
- Q:What is Light gauge steel? is it same with light weight steel?
- as a welder i can answere this. wel i think i can after 2 years of classes. so...light guage steel usually referes to the THICKNESS of the metal. also known as SHEET METAL. the only diffrences between light guage and roof truss is that a truss will be thicker metal ex- an i-beam for a structure is usually 1/2inch or 3/8 for smaller buildings. also there is no such thing as light weight steel. steel is steel the only thing that determins its weight is its size/thickness aluminum is a whole nother ballgame. ever see a pound of aluminum vs. a pound of steel? aluminum can be 1/2 or less the weight of steel. but its tensile strength suffers EX. say steel will snap at 70,000 pounds, aluminum will snap at 40,000 pounds, if it even snaps that is! it just tends to bend like rubber. aluminum is handy for many things because it will not rust.
- Q:Mild Steel?!?
- Without it, you would not have many of the things that you enjoy today. Just think, no cannons, unless they were made of bronze, but that requires mining as well. No computers, no cars, no skate boards, no tall buildings, no pots and pans, no bath tubs, no factories to build things that are made out of non-metallic materials. No stereos, no TVs, no eating utensils, just think, you would have to eat like the Japanese do with bowls and your fingers. In short, just about everything around you is some how made with steel. If you are against steel and feel that it's impact on the ecology of the world is to great, what would you be willing to give up? Your car, ipod, computer, stereo, bed-everything about it uses steel in 0one way or another. Your Cd's, DVDs, just what would you want to give up because, yuck, it was made with steel equipment, or to some extent, made from steel.
- Q:223 steel cased ammo?
- You can. A steel case is cheaper to make than a brass case, resulting in cheaper ammo, in wich they normaly use cheap, corrosive loadings. So steel cased stuff will normally be very dirty to shoot. Clean your gun after shooting and you will be fine. The story of them wearing the extractor is crap, however: the extractor is made of a steel way harder than the cheapo-steel the case is made of. It wonný scrach it. Even if it would, considering the amount of money you save with the cheap ammo like bear and wolf, changing the extractor once in a while would still be saving you a ton of money.
- Q:Soldering Steel Wire?
- Soldering Steel
- Q:physics compression:Steel rod?
- You need to calculate the stress on the rod and compare this with the mechanical properties of the steel. It would help if you were given more info. You will need to know something about the steel such as the yeild stress and E, the modulus of elasticity. The value of E is about the same for a wide range of steels. So long as the applied stress is below the yield stress, the strain is all elastic and is calculated from E. The real answer is that you can not answer this question since you do not know what the temperature is. Given the applied load, the change in length will be much different at room temperature than at 1500C.
- Q:What is the best brand of stainless steel sink?
- Yes, it’s a good idea to look for the best brand of stainless steel sink as it is used in various purposes regularly. Top brand of stainless steel is naturally longer lasting and capable of bearing lot of pressure then normal stainless steel sink. You must see top brands as well as their prices before buying any.
- Q:how do I build a steel galvanizing plant. Hot dipped Galvanization?
- That's depending on what type of metal you want to cover the steel parts in the galvanization process. The galvanization in words refers only to that kind of process which is using electric deposition of a metal through a bath of a electrolyte from a plate containing pure metal needing to be deposed on steel tide at the anode electrode or + polarity and at the other side (other electrode, cathode or - polarity). There needs to be a certain recipe of mixed salts for creating very tight and uniform growth crystals, for not being corroded or leafed away with time. There are certain salts which provide this king of growing in the same time with the polished look of the piece galvanized. This salts can be dissolved in water, for creating the electrolyte or being melt (which is not so safe technique) and used and kept like that. The dipping is no so used any more and it can not be called galvanization. More recent techniques use hot plasma blowers, meaning a torch with plasma and a wire of the specific metal to be deposited being melt in the plasma and blown to the surface of the steel part. Anything you'll do you have to deal with the local Environmental Agencies and with the tap water supply/ sewerage administrator, because you;ll have to make a contract with them for you to show that you retain the hard metals from the water dropped to sewerage, if any. Dfriend:)
- Q:how to tell the difference between steel and nylon strings?
- you do NOT want to put steel strings on a nylon string guitar, it will ruin it. It does get a little confusing. With steel strings, all 6 strings are metal. (usually steel, but not always, nickel, copper may be used too) And they use a steel core. with nylon strings, the high 3 strings, are obviously nylon/plastic. the 3 bass strings look metal, but they have a silk type core, with metal wrapped around it. The steel strings have a LOT more tension,, they can break the plastic tuners, beak the nut, pull the top up, and pull the bridge off, If you're not sure yet, have a real music store explain it, not a toy store, or costco or walmart.
- Q:AR 15 223 AMMO brass vs steel?
- The primary complaint about wolf steel cased stuff besides it being dirty is that is wears out the chamber and extractor faster than brass. That is not true. It would be true if the cases were actually steel instead of a mixture that has a hardness that is close to brass. Now to prove how pervasive this myth is I expect a minimum of 4 thumbs down for this statement alone. In any case the only issue is that is you do use steel cased ammo the chamber has to be better cleaned. The residue left behind from the coating on the steel casings will build up. If you keep firing the cheap steel cased stuff this tend to be less of an issue but when you use brass cased ammo without cleaning the chamber out or in the same session once it heats up the stuff will actually grip the brass tightly causing case head tears. And your only option is to wait for the gun to cool down yank it out by hand because at that point the casing is in essence glued into the chamber.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range