PPR Threaded Fitting
1.Type:PPR pipes & fittings for cool water and hot water;
2.Colors:white, grey,green, other customized colors available.
Characteristics of PPR fitting:
1. Healthy and non-toxic;
2. Long service life;
3. Good resistance to corrosion;
4. Light weight, high intension, and good toughness;
5. Energy-saving and wide-bound temperature enduring;
6. Low flow resistance;
7. Convenient and reliable for installation;
8. No leakage forever;
9.Type:PN1.25 /1.6 /2.0 /2.5 MPa for cool water and hot water;
10.Colors:white, grey,green, other customized colors available.
Male tee (HF2022)
- Q:Can the sleeve type pipe joint be disassembled and assembled several times?
- Some domestic manufacturers in Europe and the United States is the sleeve type pipe joint suppliers, their structure can be repeated disassembly; but some connector is a one-time pressure deformation, the joint group cannot be used repeatedly, or at least need to replace the components outside the card of the pipe, and the sealing surface of the belt assembly still need to check the qualified talents use up a nut by repeating
- Q:Is the trachea connected directly to the inside and outside threads? I remember a sealing ring
- The question is too abstract:#1: if the pipe thread (G, NPT, BSP), only need to use raw tape or liquid TEFLON coated, tighten can be.#2: some joints are sealed by the cone. Sealed by a cone (of a ferrule); some have O rings, others are straight. You can find it on PARKER's product samples.#3: some connections are screwed with M thread. Seal by type O ring or copper gasket. You go to FESTO, SMC's website to find the M thread connector, you can.#4: there are other types of fast couplings, too. There are too many kinds.
- Q:What are the types of hydraulic couplings?
- Is a flat +O ring, C - like Japan, spherical ring - free, H - like Germany, 24 degrees cone +O - shaped ring.Each has hundreds of models, depending on the manuals and samples.
- Q:Inside and outside the threaded joint, one end of the internal thread (G),
- The cylindrical internal thread and the taper outer thread form a column / cone fit; the taper internal thread and the taper outer thread form the cone / cone matching.
- Q:What's the hydraulic pipe joint material?
- The hydraulic oil of steel pipe and steel joint is not corrosive, so the hydraulic system is widely used in carbon steel joint, drinking water or pure water pipeline connection should not use ordinary carbon steel, before tightening air rules with brass, because the compressed air will carry water, gathered in the tube, if carbon steel will corrode the pipeline. The advanced air tightening machines do not produce moisture, so the rule is meaningless
- Q:Will that be all right? Then there's the PPR pipe joint on the right. Is that ok?
- Look at the strange, there is no valve, high water, low water, I hope you did not answer
- Q:What are the specifications and models of hydraulic pipe fittings?
- Three way, variable diameter, etc.. Specifications, models, tens of thousands. You want someone to make it clear to you that the joke isn't fun.
- Q:Can flared and jacketed hydraulic couplings be used as gas line couplings?
- Yes, but it's not economical.Hydraulic pipe joint pressure is very high, commonly used in 16MPa, 25MPa, 35MPa several levels.
- Q:What is the function of the pipe joint?
- This is a general term for connections that can be disassembled in a fluid path. It mainly includes welding type, clamping sleeve type and flaring type
- Q:110 degree PVC pipe joint
- The PVC pipe can be changed from two to three elbows, and try more than 45,35 meters of pipe can be installed according to the slope of 1%, the specific depends on the situation, if the flow is larger, but also with construction conditions, it is recommended that the slope is a little larger.
Our productions have introduced the latest technology and advanced production equipment. With sound testing and inspection means and solid technical strength and scientific management, we are capable of producing high quality products and our production processes are in full accordance with ISO9001:2000 international quality management system standard. The characteristics of our product meet the national standards .
1. Manufacturer Overview
||Zhejiang, China (Mainland)
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Buyer Label Offered
|Product Price Range