Power Stacker CG1646 - Pedestrian - polyurethane tyre

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

PRODUCT NAME:Power Stacker CG1646
PRODUCT INTRO

CG1646
Speed automatically reduces when driving with the fork at a height of 12" or higher.
Small turn radius makes it suitable for narrow passage ways.
The CURTIS electronic controller from helps provide plenty of low end torgue while increasing the motor and battery life.
Foot pedal reduce fatigue.
Conforms to ergonomic requirements.
Conforms to EN 1726-1 and EN 1175-1

Smooth travel and lift with excellent controls to reduces product damages and increases productivity.
Lift limit switch operates at maximum lift height to shut off pump motor.
A heavy-duty 24-volt electrical system provides good travel and lift speeds.
High quality hydraulic pump assures very little noise, maximum efficiency and durability.
Drive units is equipped an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonmically designed with a raise, lower and horn button.
European driving unit

European pump station

Residual Capacity at different lifting height

1KG=2.2LB 1INCH=25.4MM

Up to h3 mm

ACTUAL CAPACITY (Q) kg

2500

1600

1000

3700

1000

600

4600

800

500

Load centre distance (C)mm

600

700

1KG=2.2LB 1INCH=25.4MM

Identification

1.2

Manufacturer’s type designation

CG1646
1.3

Drive:electric(battery or mains),diesel, petrol,
fuel gas,manual

electric
1.4

Type of operation:hand,pedestrian,standing,
seated, order-picker

Pedestrian
1.5

Load Capacity /rated load

Q (t)
1.6
1.6

Load center distance

C mm
600
1.8

Load distance, centre of drive axle to fork

X mm

795

1.9

Wheelbase

y mm
1310

Weights

2.1

Service Weight

Kg
1365
2.2

Axle loading, laden front/rear

Kg
1410/1555
2.3

Axle loadings, unladen front/rear

Kg
1010/355

Wheels,
Chassis

3.1

Tyres:solid rubber, superelastic, pneumatic, 
polyurethane)

polyurethane
3.2

Tyre size, front

250x78
3.3

Tyre size, rear

80x70 1)
3.4

Additional wheels(dimensions)

150x54
3.5

Wheels, number front/rear(x=driven wheels)

1x+2/4
3.6

Track width,front

b10(mm)
880
3.7

Track width,rear

b11(mm)
390/515

Basic Dimensions

4.2

Lowered mast height

h1(mm)
2098
4.4

Lift height

h3(mm)
4514
4.5

Extended mast height

h4(mm)

5090

4.9

Height of tiller in drive position min./max.

h14(mm)

965/1365
4.15

Lowered height

h13(mm)
86
4.19

Overall length

l1(mm)

1950

4.20

Length to face of forks

l2(mm)

800

4.21
Overall width
b1(mm)
1050
4.22

Fork dimensions

s/e/l(mm)
60/180/1150
4.25

Width over forks

b5(mm)
570/695
4.32

Ground clearance, center of wheelbase

m2(mm)

26

4.33

Aisle width for pallets 1000x1200 crossways

Ast(mm)

2440

4.34

Aisle width for pallets 800x1200 lengthways

Ast(mm)

2440

4.35

Turning radius

Wa(mm)
1605

Performance
Data

5.1

Travel Speed, laden/unladen

km/h
5.1/5.5
5.2

Lift speed, laden/unladen

mm/s
113/160
5.3

Lowering speed, laden/unladen

mm/s
95/100
5.8

Max.gradient performance, laden/unladen

%
6/12
5.10

Service brake

Electromagnetic

E-Motor

6.1

Drive motor rating s2 60min

kw
1.2
6.2

Lift motor rating at s3 15%

kw
3.0
6.3

Battery acc. To DIN, no

4PzS
6.4

Battery voltage, norminal capacity

V/Ah
24/280

Others

8.1

Type of drive control

MOSFET Control
8.4

Sound level at driver’s ear acc.to EN12053

dB(A)
67

1)Single wheel Φ80x93

Related Products

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How does the table in the middle of the tatami mat go up and down
Need to buy the metal platform of suitable height, use screw to install small table board. Steps are as follows: Installation: desktop lock desktop board with screws on the top of the lifting platform (such as manual lifting platform should be first in the middle of the desktop is boring, the size of the hole to match the rocker tank size).
Q:Does the fixed hydraulic platform need to submit to the specification requirement
There is no clear regulation of hydraulic lift and hydraulic platform in China, which means that you can also do it without testing. Local regulations may be different. Also, if you check, you are going to the local quality and technical supervision bureau. Should go to the special branch to register, apply for installation, after installation is finished again ask them to check the acceptance of the check. There is a fee for it. And it will be checked every year.
Q:The design of graduation is designed for mobile shearing and hydraulic lift
Aluminum alloy lift, lift platform aluminum, aluminum alloy lift platform, aluminum alloy elevator, shear fork lifter, cut shear fork lifts, the fork lifts, elevator guide rail type, guide rail type cargo-lifts, set of cylinder type elevator, set of cylinder type lift table, set of cylinder type elevator, fork lift platform, guide rail type lift platform, set of cylinder lifting platform, electric lift high quality manufacturer, welcome new and old customers to choose
Q:How does hydraulic platform change sealing ring, how to operate
Because the concrete structure of hydraulic cylinder is different, the order of disassembly is different, and it should be judged according to the specific situation.
Q:How does the platform maintain
Remove and disassemble the valve, and remove the valve core and remove it from the new installation. Put all the hydraulic oil in the tank into the tank, remove the oil absorbent filter, and put it back in the tank. The oil tank refilled with new oil.
Q:What about the heat treatment of the lifting platform?
Servo feed system stability is the most basic condition to work, especially when low speed feed does not produce "crawl", and can adapt to the change of the external loads and does not produce resonance. Stability is related to system inertia, rigidity, damping and gain. The life of the feed system, is mainly refers to keep the transmission accuracy of nc machine tools and positioning accuracy of the length of time, namely the transmission parts's ability to maintain its original manufacturing precision, therefore, should be a reasonable choice material, heat treatment and machining process to the transmission parts, and adopt suitable lubrication method and protective measures, to prolong life.
Q:The purpose of the rail elevator
Cannot reach the requirements of the occasion, such as difficult to solve in the narrow space, can make the efficient delivery platform, product set for hydraulic system, the door on the interactive chain, floors and lifting platform work table can set operation buttons, achieve multipoint control.
Q:The home is decorated, make a tatami mat the platform should pay attention to what aspect?
The second is to notice whether the product has a secure clamping system. Most of the products on the market are mechanical clamping system, which is low in safety, and the system is too resistant to it. Best choice is the electronic control system, because it will through the electronic system induction to the resistance changes, more than a certain value will stall, electric and automatic recovery (electronic resistance setting values are very sensitive, high security), such as task of children. The third is, of course, the manufacturer and the brand, the good manufacturer and the brand make the product more reliable, which is not to be said in detail.
Q:What standard elevator platform needs to go to the special equipment inspection to report
Hello, it should be the elevator that is rated above or equal to 0.5 t, which belongs to the special equipment management scope. Let's take a look at this rule. Special equipment safety inspection regulations
Q:How to improve the oil leakage line
The line itself I think should be no problem, I don't know where your oil spill is. I think it's an interface leak, Or a hydraulic cylinder leak, And is your job stress reasonable? Is it too stressed?

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range