portable edge bander machine

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

portable edge bander machine

Advantages and Features

1. portable model;

2. can work on straight edges like inside the arc or out side the arc or circle.

3. New glue extraction system ensuring glue evenly applied to tapes;

4.Short time for warming up around 5-7 minutes;

5. Larger glue tank with litte increase on machine weight;

6. Adjustable feeding speed, feeding tape at speed around 2-6 meters per minute;

7. Longer working life due to improvements on the components;

8. Suitable for low temperature hot-melt glue (below 200 degree C)

9. All electric components are UL and CSA certificated.

Usages

1. portable edge banding machine can be used for large size wooden boards and half-finished wooden products, the board can be fixed in place while the hand-held edge bander proceeds.

2. portable edge banding machine can also be used for small sized wooden boards while the machine is fixed onto a conveyor belt or table with stand, the process of edge banding is the same for normal size boards.

3. portable edge banding machine can be used for edge banding both for straight line or curved line or arc or circle.

It used PVC, ABS, melamine and wooden vereer, the portable edge bander is light so it can be used for large size wooden boards as well as incomplete wooden products, the board can be fixed in place while the edge bander is in operation. The length of frame is not limited, it can also be used for small size wooden boards where the machine is fixed onto a conveyor belt or table with a stand. The process of edge banding is the same as normal banding work.

Technical Datas

Model

KM600D

KM450

KM10

KM09

KM08

KM07

Mini Radius of Banding

20mm

20mm

20mm

20mm

20mm

20mm

Feeding Speed

2-6m/min

2-6m/min

2-6m/min

2-6m/min

4m/min

4m/min

Thickness of Banding

0.3-3.0mm

0.3-3.0mm

0.3-3.0mm

0.3-3.0mm

0.3-3.0mm

0.3-3.0mm

Width of Banding Tape

10-60mm

10-45mm

10-60mm

10-55mm

10-45mm

10-45mm

Working Temperature

200°C below

200°C below

200°C below

200°C below

200°C below

200°C below

Engine’s power

25W

25W

25W

25W

15W

25W

Total Power

725W

835W

650W

650W

765W

525W

Power Supply

220V/50-60HZ, 110V/60HZ

220V/50-60HZ, 110V/60HZ

220V/50-60HZ, 110V/60HZ

220V/50-60HZ, 110V/60HZ

220V/50-60HZ, 110V/60HZ

220V/50-60HZ, 110V/60HZ

Glue Pot Capacity

620ML

320ML

320ML

320ML

160ML

330ML

Net Weight

10KG

9.7KG

9.2KG

9.2KG

8.5KG

11KG

Machine Size

460X380X480mm

460X380X480mm

410X370X450mm

410X370X450mm

410X370X450mm

410X370X450mm

Material of Tape

PVC, Wood paper, Melamine

PVC, Wood paper, Melamine

PVC, Wood paper, Melamine

PVC, Wood paper, Melamine

PVC, Wood paper, Melamine

PVC, Wood paper, M

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the difference between manual edge banding and machine edge banding?
The machine is certainly not much better than manual veneer, stitching in place, not prone to glue glue evenly through the end of the phenomenon
Q:What kind of beam is an edge banding beam?
First of all, the edge beam refers to the outer edge of the cantilever plate and the beam connected to the beam. As shown in the following figure:Turn left and turn right |Types of beams:1, from the function, structure of beam, such as foundation beam and frame beam, column, and the vertical load-bearing walls constitute component space structures; structural beams, such as beam, beam, continuous beam, the crack resistance and seismic stability and constructive role.2, in accordance with the beam structure engineering attributes can be divided into: frame beam and shear wall supported by frame beam and frame beam, beam, masonry wall beam, masonry lintel beams, shear wall, shear wall, shear wall frame beam beam.3, from the construction process, there are cast-in-place beams, prefabricated beams and so on.
Q:With full automatic tracking edge sealing machine, that is, curves and straight lines can be "edge banding" mean?
No, it isn't。 Tracking is just to fix the front and rear panel arcs
Q:What kind of material does furniture plate edge banding use, that is beautiful and beautiful?
Copper strip, but the price is expensive
Q:On the whole wardrobe density board edge problem, found that the overall wardrobe to buy a lot of partitions are no edge, I want to take down and deal with it, brush varnish OK?
Formaldehyde release, you are sealed on those sides also useless, the key is that you buy when you must make sure what standards manufacturers use. Domestic standard E1 E2 is no problem. Formaldehyde in the sheet is a chronic release that can last up to 15 years.
Q:Does the cap have edge reinforcement?
A, most have, but sometimes also useful force steel, and do edge reinforced, specifically according to the requirements of the drawings.Two, a brief introduction of banding reinforcement:The construction of edge reinforcement is usually required by the construction and the force of the structure.Most of the reinforcing bars appear at the end of the non supporting plate, such as the end of the cantilever plate.Three, a brief introduction to the platform:A pile cap is a link between a pile and a column or pier. The pile cap is connected with several or even more than ten piles to form a pile foundation. Cap is divided intoHigh pile cap and low pile cap: low pile cap is generally buried in soil or partially buried in soil, and the high pile cap generally appears on the ground or water surface. Because the pile cap has a length of freedom, the supporting body around it can not bear the horizontal force. The stress condition of the foundation pile is very unfavorable. The internal force and displacement of the pile are larger than those of the lower pile cap under the same horizontal force, so the stability of the pile is lower than that of the low pile cap.
Q:What glue does the edge banding of the cabinet use?
Sure, my original company is doing edge banding sold to cabinet manufacturers!
Q:Etoon edge problem
You are up and down the two sides have, or on the one side, the two sides are available, you have to adjust the pressure wheel before and after the number of positions, or else the right angle of the nose is wrong
Q:What is the composition of the edge hot-melt adhesive?
Vinyl acetate copolymer (EVA) as the main material, adding tackifier and other components of the solid binder, with fast bonding, high strength, aging resistance, no poison, good thermal stability
Q:40Cm thick raft, straight through 12 steel double double direction, outer edge steel reinforcement length
Remove the upper and lower protective layer, bend the ribs upward, bend the gluten, bend and fold the 150mm

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range