Polypropylene Enginnering Fiber for Projects
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification of Polypropylene Fiber
Raw material: polypropylene
Type: MonofilamentMelting point:160~180℃
Material | Polypropylene | Type of fiber | Bunchy single fiber |
Density | 0.91 | Anti-pulling strength | >450Mpa |
Anti acid and alkali | Extremely strong | Elasticity modulus | >3.5Gpa |
Melting Point | >165℃ | Diameter | 18-48um |
Safety | Good | Water absorption | without |
Thermal Conductance | Extremely bad | Stretching limitation | >15% |
Low temperatureresistance | high | Specification | 3/6/9/19mm |
Function of Polypropylene Fiber
Crack resistance of concrete
To improve concrete impermeability
To improve freeze-thaw resistance of concrete
Improve impact resistance and toughness of concrete
To improve the durability of concrete
Application of Polypropylene Fiber
PP fiber for building can enhance the crack resistance, anti-permeability, anti-abrasion performance, frost-resistance, antiknock and workability of mortar and concrete. Due to the uniform distribution of tens of thousands of fibers in the mortar and concrete, keeping the whole structure strong, avoiding the structure being struck to pieces, preventing the steel from corroding, lengthening the service life of the project and reducing the maintaining cost.
Application Area
Used for crack-resistance putty powder, heat retaining mortar, concrete, building’s surface, wass, ground, pool, undercroft, road and bridge projects.
Advice on Construction
The mixed fibers quantity per CBM mortar for common plastering mortar: 0.9-1.2kg, usually 1kg/m3
The mixed fibers quantity per ton mortar for heat maintaining mortar:1-3kg
The mixed fibers quantity per CBM concrete”0.6-1.8kg, normally 0.9kg/m3
Package of Polypropylene Fiber
common 0.9 or 1kg per bag. Maybe modified with customer’s requirements.
- Q:Is the shirt pure cotton or cotton mixed with polyester?
- Personally, relative to polyester, a good shirt is still made of cotton. Plus polyester, the feel and comfort of the dress has always been worse, but the price can be cheaper.
- Q:What is resin? What is fiber?
- Resin is the main raw materials for the manufacture of plastics, paint is also used the system (the main film-forming material, coating such as alkyd resin, acrylic resin, synthetic fatty acid resin, the resin in the Yangtze River Delta and Pearl River Delta are also relatively strong in the paint industry, such as Changxin chemical, Nuplex resin, three resin, Ying DSM syntech resins), adhesives, insulating material, synthetic resin in industrial production, is widely used in separation and purification of impurities in liquid, with macroporous adsorption resin, ion exchange resin, and some special resin.
- Q:How are fibers classified?
- Don't cut off the filament fiber, chemical fiber processing, and divided into monofilament and multifilament yarn. The monofilament only a wire, transparent, uniform, thin filament; by several filament and synthetic filament.Staple fiber: a chemical fiber that can be cut into various lengths of fiber after spinning.Profiled fiber: a variable cross-section or hollow fiber made by changing the shape of a spinneret.Composite fiber: two or more than two polymers in the form of melt or solution, respectively, enter the same spinneret, from the same spinning hole in the form of fiber, also known as two-component or multi component fiber.Textured yarn or textured yarn that undergoes deformation.
- Q:What's the difference between Oxford fabric and polyester fiber?
- Oxford cloth, also known as Oxford spinning, namely nylon Oxford, also known as nylon Oxford cloth, or nylon, also known as nylon, nylon, scientific name polyamide.(later synthetic polyester Oxford)Polyester fiber is 100% pure polyester fiber! The scientific name for polyester fiber is polyethylene terephthalate (ethylene terephthalate), referred to as polyester.
- Q:What are the advantages and disadvantages of polyamide fiber?
- The elastic and elastic nylon fabric excellent recovery, but the small external force deformation, so the fabric in the wear process variable.The moisture absorption of nylon fabric is a good variety in synthetic fiber fabric,It has good resistance to decay and corrosion.
- Q:How do you stick carbon fiber stickers on your car? Also, when there is a large amount of concave, how should I do?
- Paste position 1, clean body, conditional can use fiber shedding cloth dipped to scrub with 50% alcohol or isopropyl alcohol or acetone, also used soap and water; the surface of the solvent cleaning solvent to evaporate completely behind the available paste;2, in general, the side of the stick slowly, while whiletoolsevenness, while Jiedi paper;3, if the car width is less than 10 cm, and the sticker all tear paste. But be careful not to happen accidentally sticking or falling off the ground and sticking up the dust;4, cleancloth [such as phone cards or credit cards in the film fewrampuntilno or scraping a few; not until the bubble inside the car stickers, 24 hours do not wash or exposure.
- Q:What are man-made fibers? What are his strengths and weaknesses?
- Synthetic fiber has similar properties as natural fibers. It has good moisture absorption, air permeability and dyeing properties. It is soft and lustrous. It is an important textile material. It can be spun or blended with natural fibers such as wool and silk and synthetic fibers. Viscose fiber in the high strength because of high strength, good resistance to many times deformation, can be used in industry. Regenerated protein fiber having a property similar to wool and used as a substitute for wool. Proteins can be grafted, copolymerized or blended with other fibers to improve the properties of other fibers. In 1984, man-made fiber production was about 3.1Mt, accounting for 21.3% of total chemical fiber output.
- Q:What is the working temperature of the carbon fiber material in the mechanical structure?
- Features: high mechanical strength, high temperature resistance (short time resistance to 350 degrees), low thermal conductivity, low water absorption, good chemical resistance, antistatic, good dimensional stability, easy processing. Excellent physical properties
- Q:What is the viscose rayon
- Yes, also known as rayon rayon factory, is a popular name, called viscose fiber, viscose rayon or referred to as.
- Q:What's the difference between high-density and solid wood boards?
- Solid wood board, as its name suggests, solid wood board is to use complete wood to make plank material. These boards are durable and natural in texture and are among the best in the decoration. But because of the high cost of this kind of plate and the high requirement of construction technology, it is not used in the decoration. Solid wood board in accordance with the general classification of the actual name of the plate, there is no uniform standard specifications.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Polypropylene Enginnering Fiber for Projects
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords