Polycrystalline Solar Panel 200W In High Efficiency Good Quality

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
200 watt
Supply Capability:
200000000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Description of Product.

Solar Module is the core part of solar PV power systems, also is the highest value part of it. The function of Solar Module is to convert the sun's radiation to electrical energy, or transfer it to battery and store in it, or to drive the load running.

The Product has been widely used in space and ground, it mainly used for power generation systems, charging systems, road lighting and traffic signs areas. It could offer a wide range of power and voltage, and with high conversion efficiency, and long service life.

2. Detailed Information

Type

CNBM Solar Polycrystalline Series II

Materials

Silicon

Size

Length

Width

Height

1640

992

40

Guarantee

12 yrs free from defects in materials and workmanship

No less than 90% within 10yrs and no less than 80%   within 25yrs

TUV(IEC61215&IEC61730), CE, UL

Application

 Photovoltaic/ solar/ green energy/ energy saving

Descriptions

1.High efficiency crystalline silicon solar   cell. Even if under the weak light, the solar module can produce maximum   power output.

2.Tempered glass (toughened glass):   Anti-reflecting coating and high transmission rate glass increase the power   output and mechanical strength of solar module.

3. EVA and TPT: Using high quality EVA and   TPT to prevent destroying and water.

4. AI frame: Without screw, rner   connection. 6 holes on the frame can be installed easily.

5. Junction box: Multi function junction   box with water proof.

6. Long lifetime: ≥25 years; Less power   decrease.

7. Good performance of preventing from   atrocious weather such as wind and hails.

8. Resisting moisture and etching   effectively, not effected by geology.

9. The certificate issued by international   authority: UL, TUV, IEC, CE.

 

Packaging   Details:

26pcs/pallet, 28pallets/   40HQ 

Our   solar panels are packed in cartons, and then pallet. 

Shipping by sea or by air are both ok, it up to customer’s chose.

We’d like to inquiry the freight cost for customer after be informed exact quantity and destination address.

3.Technology Process

Polycrystalline Solar Panel 200W In High Efficiency Good Quality

4. The Pictures of Product

Polycrystalline Solar Panel 200W In High Efficiency Good Quality

Polycrystalline Solar Panel 200W In High Efficiency Good Quality

Polycrystalline Solar Panel 200W In High Efficiency Good Quality

5.Packing Details

Polycrystalline Solar Panel 200W In High Efficiency Good Quality

6.FAQ

We have organized several common questions for our clientsmay help you sincerely

1). What’s price per watt?

A: It’s depends on the quantity, delivery date and payment terms of the order. We can talk further about the detail price issue. Our products is high quality with lower price level.

2). Can you tell me the parameter of your solar panels?

We have different series of cells with different power output, both from c-si to a-si. Please take our specification sheet for your reference.

3). How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

4).Can you do OEM for us?

Yes, we can.

5). How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The perfect time of receiving is related to the state and position of customers. Commonly 7 to 10 working days can be served.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Tips for convincing my school to put solar panels on the schools roof?
When okorder.com/ Good luck but the best way to win is to find a way to get it done and then they can't say no.
Q:Do you need to pay for electricity if you have solar panels?
I think that rustoria67 bumped his head on some thing. There are thousands of homes using only solar panels to power their homes, and it no way near an acre of them. With the right setup Kw of panels will work. Remember one can't bring a boat to an airplane race and hope to win. Look at this link.
Q:Can someone please explain to me the basics of solar panels and power storage/usage?
You can not really store electricity. a battery may seem like it, but it won't store it forever. What you can do, is let a professional installer install solar panels on your house. They will connect this to the mains electricity. If you are not using the electricity, then it will be distributed to others. You will receive money for this (or actually, you'll have to spend less yourself). So lets say you use 000 kwh a month (is alot) But the solar panels produce 500 kwh a month (is alot) Then you will only have to pay for 000-500=500 kwh, while you used 000 kwh. Solar panels are an investment, they cost much to install, but they will save you're energy bill.
Q:How to connect 2 power supplies together? (Solar panels)?
Leave the two positive terminals connected together.Disconnect the negative leads from each other. Get two amp diodes from radio shack. Connect each diode in series with each negative lead. there is a band on one end of the diode. Connect each diode so that the end with the band is attached to the negative side of each solar panel. Tie the other ends of the diodes together. This will become the new negative end of your solar panel supply. With the sun shining on the panels , you will now measure the voltage from the plus side of the solar panels to the new negative junction. Connect your load leds in place of the voltmeter and enjoy. Without the diodes , each solar cell thinks the other solar cell is the load. In effect each solar panel is shorting out the other. Some solar panels that you buy already have a diode in their junction box connected for that purpose. You need the diodes to provide the necessary isolation between the two panels, then they can both act in parallel to provide current to the load.
Q:Question about using solar panels......?
I don't think it is enough solar power. Your motor requires .5A x 9V = 3.5 watts. The solar cells are .450A x 4V x 2ea. = 3.6 watts, .2A x .5V = .3 watts, .A x 9V = .9 watts total solar = 4.8 watts. The problem with connecting the cells in series to get the right voltage, like the two 4V cells in series with the .5 volt cell (total 9.5 volts) is that the .5 volt cell limits the maximum current to only 0.2A. If you paralleled that with the 9V cell, you would get 9 volts at 0.2 + 0. = 0.3A, too low to operate the motor at its design current and voltage. The best you could do is put the two 4V cells in series, and in parallel with the 9V cell (a blocking diode might be a good idea, but probably not required for such a small array). That way you get 8 volts at 0.55 amps.
Q:Are DIY Solar panels legitimate for saving electricity?
Your location could effect this answer significantly.If you are in an area that requires considerable amounts of heating,and you are looking to save some money with a homemade project,try solar-thermal.S-T is easy and cheap ,can be built from common scrapyard materials,and will give you a great knowledge gateway . The orientation and tracking skills you will learn can be used later with PVs if you choose,or you can make better concentrators for the solar-thermal and build yourself a sterling or rankin cycle engine to generate electricity.If u need heat,or even hot water, u can start saving the money u put into the system immediately. Concentrated PV is here and now ,but, in a year or 2 it will be cheap and readily available and thats when PV will start to approach the efficiency of solar-thermal.there a great sites and groups on just S-T out there ,join 'em,check 'em out,read the free info from those who have built working systems,and you will probably find a more useful method of saving money and the planet at the same time.Just remember to approach it as a hobby/learning experience at first.Start with solar-thermal....theres a reason the anti-greenies point at the ROIs on PVs,great arguement against alt energy,but over the last 30 years I've shut up quite a few skeptics with my solar-thermal projects ,esp. when coupled with geothermal...have fun,make a local scrapyard owner/worker ur freind..................GEOD
Q:Solar Powered Propeller?
Solar panels produce electricity. To move the propeller you need mechanical motion. An Electric motor converts from electrical to mechanical power. Most Solar Panels produce DC electricity as do batteries so you need a DC motor that is sized to match the Output of your solar panels. For small temporary projects like this I find that hot melt glue is great to assemble parts. Using a voltage meter you can expose your solar panels to a strong light (or one equal to what you expect during your demonstration) and measure the voltage across the terminals. This may help to size the motor. It depends upon the size of your propeller and how it is made. Your three choices are to use it to power an airplane, to power a boat underwater or to power a boat like an air boat. You might also use the air boat concept to make a car. (air car) The air boat might be the simplest to make but you will need a body of water to demonstrate the concept. The air car doesn't have such a requirement.
Q:Finding the output of a solar panel?
You need full sunshine from the sun, or a lamp that will give a light spectrum similar to the sun, a volt meter, Milli-amp meter, and a variable resistor of 0 to 000 ohms. The voltmeter test leads go across the solar cell leads. The amp meter leads will be in series with the solar cell. Let's say, positive lead of the solar cell to the the positive lead of the amp meter, the negative lead of the amp meter to one terminal of the variable resistor, and the wiper terminal of the variable resistor to the negative lead of the solar cell. Slowly decrease the value of the resistor until the voltage from the solar cell just begins to drop. Take note of the amp meter reading. This is about the high end range of the solar cell. You might want to begin with a micro-amp meter for the current meter.
Q:Solar power panels?
They may be connected and running, but you just can't see the cables because they are concealed. Of they may not even be electric. They may be solar water heaters that have water lines running inside a black box. Did your mom purchase the house with them on there? If so, can she contact the previous owner to learn who installed them and why? In the absence of any meaningful information, I would suggest that you call a solar company in your area and have them come out to tell you what it is that you have.
Q:Have a question about mobile homes and solar panels!!!?
I okorder.com Hope this helps.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range