Poly Crystalline 215W Solar Panel Made in China

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
100 watt
Supply Capability:
10000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Polycrystalline Silicon Max. Power(W): 215 Number of Cells(pieces): 60

Product Description:

Product Description

Produt name: 215W Poly Crystalline Solar Panel


Product Highlights:
  1. Guarantee positive power tolerance (0~+3%)
  2. Module can bear snow loads up to 5400Pa and wind loads up to 2400pa
  3. High performance under low light conditions (cloudy days, mornings and evenings)
  4. Certified by Europe standards of TUV, IEC, CE and British MCS and AUS CEC
  5. OEM/ODM available
 
Specification:

Electrical Characteristics
Maximum Power [Pmax]215W
Power Tolerance+/-3%
Maximum Power Voltage [Vmp]26.6V
Maximum Power Current [Imp]8.09A
Short-Circuit Current [Isc]8.61A
Open-Circuit Voltage [Voc]33.5V
Module Efficiency14.62%
Max. System Voltage1000VDC
Cell Size and SeriesPoly 156*156(6 inches)  54pcs (6*9)
Temperature Coefficient of Pmax- 0.47% / º C
Temperature Coefficient of Voc- 0.35% / º C
Temperature Coefficient of Isc0.05% / º C
Mechanical Characteristics
Dimension (mm)1482*992*40
FrameAnodized Aluminium Alloy
Glass3.2mm,High Transmission,Tempered Glass
Junction box & CableIP65 Rated weatherproof connectors
Cable: TUV 1x4.0mm2 / UL12AWG,Length:900mm
Weight18.0Kgs


Industry-leading Warranty:
Warranty on material and workmanship: 10 years
Guaranteed output of 90% after 12 years and 80% after 25 years.

250W Polycrystalline Solar PanelPoly Crystalline 215W Solar Panel Made in China

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Are solar panels only effective in places where there is an abundance of sunlight?
Solar panels are *more* effective in places with abundant sunlight, but can be used anywhere that there is light. The problem is an economic one. Solar panels are expensive and can only produce so many watts per square meter. If you have less sunlight, you'll need more panels to get the same amount of power. Germany has a relatively high latitude, and are reported to make extensive use of solar panels (funny, I spent 2 weeks there last month and saw very few panels). The reason for their use of the panels is that their government offsets the cost of installing them through subsidies. Other governments have similar programs.
Q:Tips for convincing my school to put solar panels on the schools roof?
Installing solar cells cost money. It would swamp the capital spending portion of the school budget. I doubt the school board would put it into the budget because of the cost involved. If they did I guarantee you that, when presented to the voters, they would turn down the budget. If you really want to do something, I suggest a fund raiser, but you are probably looking at raising more than $500,000. Good luck.
Q:A couple questions about home made solar panels?
Earth4Energy okorder.com/
Q:Anyone have or know someone who has solar panels installed in their home? Is it worth getting?
and, if given the tax credits, you'll see a faster return on investment in CA than I would have in Western PA (I was given a 0 year return number without factoring any tax credits). Plus you'll be doing something good for the environment. My brother put his house for sale which had solar panels for hot water, and was offered good money for the solar panels independent of selling the house. If anyone has a any no answer that doesn't involve the initial expense, I'm looking forward to reading it.
Q:how to make your own solar panels?
For okorder.com/
Q:Solar panel help please?
Solar water heating is low technology. There are do it your self plans for it all over the internet. There is no electricity involved. Simply laying a garden hose on the ground in the hot Sun can heat the water to really high temperatures. Just have a shutoff nozzle on the hose, turn on the tap and open the nozzle until water comes out and then close the nozzle at the end of the hose. Let the hose full of water sit in the sun for an hour or so and then open the nozzle and feel how hot the water is that comes out. Be careful, because it can be so hot you can get a burn! When the gallon or so that can fit in the hose has all come out and is replaced by other water from the tap, it will feel cold again. Close the nozzle and wait another hour to heat it up again. A solar hot water heater is just a very long coil of pipe in the Sun, maybe with a pump to slowly circulate water from a holding tank so you can make and store more hot water that fits in the hose. Solar electric power is completely different. It uses semiconductor devices called solar cells to make electricity directly from light. Many of solar cells are usually arranged into large panels to make larger amounts of power. In electricity, Watts = Volts * Amps. Battery capacity is usually measured in Amp-hours. Small solar panels are often designed to produce electricity at 2 volts. A 60 Watt, 2 volt panel makes 5 Amps of electric current, because 2*5=60. So if you use it to charge a 2 volt battery with a capacity of 5 Amp-hours it will take hour to charge. A 0 Amp-hour battery would take 2 hours to charge with the same panel.
Q:Why don't we design a wind-turbine with solar-panels on it?
No. The solar panels would never be balanced. Those blades need to be very balanced. Additionally, how would the solar panels get the power from a rotating blade to the ground? It is better to have separate units. What we ought to be concerned with is having large solar panel farms. These are counter-productive to going green, as they still require long and harmful power transmission lines. Solar panels ought to be put on top of buildings which would be using that power. Any additional power not used could be added to the power grid. For those types of clean energy that are not practical on the roof might get space near the building, keeping the transmission lines as short as possible. Large farms ought to be owned by the nation, keeping the cost of the power to the customer as low as possible. Power companies rip off consumers with their price gouging. It is time to let the burden of making a few rich at the expense of the many end.
Q:Self build solar panel ?
Lithium okorder.com/ For USB power, there are some references you should seek out from the websites of Fairchild, On Semiconductor, Texas Instruments, National Semiconductor, just to name a few. There are others, and if your IPad has the control circuitry for the accurate charging of their batteries, and you just need the USB port to have the right power available, a high compliance regulator such as an LM7805 should do just fine. Spec sheets for that regulator are available through the above mentioned manufacturers websites as well.
Q:Kwh and watt conversion-- solar panel cost?
OK, KWH stands for Thousand Watts per Hour. You used ,623,000 watt/hours last month. If you pay $6.00 per watt, your bill would be $9,738,000.00. That's right-$9 million,seven hundred and thirty-eight thousand and 00/00.
Q:What to do with a solar panel?
Solar cells convert the energy of the sun into electricity. By using items commonly found in the home or your local hardware store, you can make a solar panel to demonstrate this photoelectric effect. You can also save energy by converting some of your traditional electrical supply over to solar power. Use sheet metal shears to cut the copper flashing in a square or rectangle to fit the size of the electric burner. Be sure to use a piece of copper flashing that is thoroughly cleaned. You may use sandpaper to thoroughly remove any sign of corrosion before proceeding. Place the copper flashing on the electric burner and turn the burner on. You will need to cook the flashing for as long as 30 minutes or more to develop a thick layer of black cupric oxide.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range