Polished Porcelain Tile Crystal Jade Three colors CMAX23601/23602/23603

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1267.2
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Brief Introduction

 

Polished Porcelain Tile Crystal Jade Three colors CMAX23601/23602/23603 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.

Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.

 

Product Features

 

  Polished Porcelain Tile, Double Loading

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

  OEM service could be offered

  Marketing support on samples, catalogues as well as carton designing

  Professional sales team for product, document and schedule of importing and exporting.

 

Product Specification 

 

  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl

 

Production Line & Package 

 

Polished Porcelain Tile Crystal Jade Three colors CMAX23601/23602/23603 Polished Porcelain Tile Crystal Jade Three colors CMAX23601/23602/23603


FAQ

               

    1. Q: May I have my own design?

      A: Of course. But the pictures or samples of the products should be offered by your party.

    2. Q: May I ask for some samples?

      The samples are free. You just need to pay for samples’ courier cost.

    3. Q: Can wall tile be used on the floor?

      A: Not in most cases. Please check with your installer or YIJIANG for application recommendations.

    4. Q: Can floor tile be used on the wall?

      A: Yes. Exterior applications require special precautions and installation methods. Please check with your installer or YIJIANG for application recommendations.



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:how to install floor tile in a diamond pattern?
If your not overly familiar with doing tile a diagonal isn t the easiest to start on. Lay out and proper tools are a big help in your preplanning. Right size trowel and large enough wet saw and had cutter is a must. Get the longest straight site line and split the room in 1/2 with a chalk line. Lay tile back to the wall and figure the size of pc(pcs) you need. You can cut a few of these pcs as a starting point. Knowing you split the room you should be equal when you get to the other side. A perfect straight edge will help keep your lines straight. Use this on all sides as you build out from that wall and lay as though your doing a straight lay just that your on a 45 degree. Or if you are doing an open ended area , you can cut several tiles in 1/2 and work back. A bit trickier but overall look is better. Don t cut tiles directly in 1/2, you must cut just off center if this is a starting point. Very hard to do and takes experience. Any specific questions you can e mail me through my avatar and check my qualifications there. GL
Q:kitchen tile backsplash?
If your husband is concerned because of the cuts, it ll depend a lot on what type of tile your working with.. A soft bodied tile that is self spacing. The kind that has little lugs on them and fit together fairly tight, these are easy to do.A little more challenging if they require a spacer. If you use a mastic, the tiles will stay pretty much in place when you set them and then place a small spacer in the joint. If you know or when you know what type your installing e mail me through my avatar and check my qualifications there. I ll help you along and give you pointers.. GL
Q:Why did my porcelain tile crack around my toilet?
The floor under the toilet wasn't level so when the weight of the toilet went on top of the tiles it caused the tiles to crack. Make sure the tiles are back buttered as well as thinset on the floor and that they are level with each other. I would cut out any vinyl from around the toilet and then apply the tiles. Also wail for the thinset to dry for a couple days before installing the toilet so the tiles don't move.
Q:Do you need need grout spacing for marble floor tile?
as was mentioned the grout lines help to allow for small or large diferences in size. The grout also makes the seal between the tile to keep water from leaking between.
Q:I just had ceramic tile floors installed, what are the pros & cons of sealing the grout and tiles?
Seal them now. After time it doesn't matter what color the grout is it will start to discolor from dirt. By sealing it now you prevent that. It makes it easier to clean also. Read the directions on the can or bottle to see how often you have to reapply. DO NOT USE BLEACH ON YOUR FLOORS!!! It will eat away at the sealer.
Q:What is the use of ceramic tile?
Use: the construction of the wall to be wet (outside the wet dry), and to maintain a certain degree of flatness, uneven or extremely rough parts of the application of cement mortar and other materials leveling; grass-roots must remove the floating ash, oil, wax, so as not to affect the stick Knot tiles in 5 to 15 minutes after the move can be corrected. Water-cement ratio of about 1: 4, after mixing the binder should be used within 5 to 6 hours (the temperature is about 20 degrees); the mixed adhesive applied to the back of the adhesive brick, and then Press hard, until the plain so far. Due to different materials and the actual consumption of different, generally at least about 4.5 to 6 kg per square meter, paste thickness of about 2 ~ 3mm. Use of common sense: 1, deacetal type: vulcanization speed, transparency is good, but in the curing process Release of acetic acid; with a pungent odor, but also on the metal, coated glass and some inorganic materials corrosion.
Q:porcelain floor tiles?
No you shouldn t.. Dirt, dust and every day stuff will accumulate in the joints and be almost impossible to get out. All tiles are designed to have a space, some smaller and some larger than others. The grout the goes between the tiles is part of the system to make it stable. Sealing the grout is a major help in keeping it clean and stain free, if this is your concern. Porcelain is made to have a sanded grout along with a space of 1/8 to about 1/4 inch. Or 3/6 mm This spacing will also help make up for minor tile sizes that will throw you off if you try to but them tight. Any questions you can e mail me through my avatar and check my qualifications there.. GL
Q:Waterproof tiles
In fact, this problem is not difficult, with low water absorption of tiles can be resolved, if not assured, then now some of the brand wall of the wall, basically effective solution to the anti-fouling function, which with the brick itself Water absorption and the thickness of the tile surface glaze
Q:color of bathroom walls and tiles?
well itll b good to use torquisey/ bluey colour tiles with some white in it. basically try not to make ur bathroom dark, erm go for light colours looks better n gives the bathroom a bright look.;) sorry i cnt say much but i woud make my bathroom like that
Q:Grout is popping out of the kitchen tile floor.?
It's nice if you have a Dremel tool to use,but if your like me you have already spent more than you wanted to on the new product and didn't anticipate on spending any more getting the old ones out. I would spend the little bit it would cast to get a grout removal tool. Looks like a handel for a single edged razor blade but instead has a very rough edge to it. Diamond or graphite I think. Or I would get a flooring chisel and use a mallet. I think you are wanting to save your old tiles or reuse them. You might not see a small flooring chisel but they do have small chisels in the same area. Get an inexpensive one if you go that way because after use it wouldn't be worth saving or sharpening. Just tap it ac cross using a mallet, or a hammer, or a high heeled shoe.(just kidding about the shoe) Good Luck

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range