1200mm Plastic Pipe Cutting Machine
1. Suitable for PE, PPR, PP, PVDF plastic pipes and fittings
2.CE and ISO9001
1200mm Plastic Pipe Cutting Machine
Applied to solid pipes or structured wall pipes made of thermoplastic, or other pipe and fittings made of non-metal materials
Suitable for cutting pipes according to specified angel and dimension while making an elbow, tee or cross, which
lowest the material waste and improve the welding efficiency
Cutting angle 0~67.5° accurate angle location
Applied to solid pipes or structured wall pipes made of thermoplastic such as PE and PP, and also other pipe and
fittings made of non-metal materials
A special designed integrality of body and swivel table makes them extremely stable
Self inspection and stop of the machine in case of saw blade breaks enables to guarantee operators safety
Reliability, lower noisy, easy to handle
Complies with 98/37 and 73/23 EEC standards
Maximum range: 1200 mm
Ranges of application: PE, PP and PVDF
Cutting angles: 0°~ 45°
Working voltage: ~380V ±10%, 50Hz
Total power: 5.2 kW, including: drive motor:2.2kW, hydraulic unit motor:3KW
Max. line speed:250m/min
Environment temperature: -10° ~ 67.5°
The whole machine consists of basic frame, support and press bar
- Q:What's the difference between ultrasonic plastic welding machine and ultrasonic plastic hot melt machine?
- It's all one thing
- Q:How can ultrasonic plastic welding machine replace ultrasonic mould?
- How can ultrasonic plastic welding machine replace ultrasonic mould? First, the ultrasonic transducer horn contact the mold place, with cloth or alcohol wipe clean, followed by ultrasonic, mold a little to tighten!
- Q:How to make ultrasonic plastic welding mould?
- You may often have this idea: the welding head design and production is very simple. Don't be misled, when using an improper processing or without tuning of the welding head, will give you the production to bring expensive losses -- it will damage the welding effect, even more serious damage will directly lead to the transducer or the generator. So the design of the welding head like it's not as simple as that, on the contrary will need a lot of professional knowledge and skills, how to ensure the welding head can be the most economical work? How to ensure the welding head can be mechanical vibration transducer conversion can be effectively delivered to the workpiece, forming stable welding in Nicle ultrasonic, our engineers will each link are considered very full. Even if has several years of experience in the design and development, we still believe that only through the strict test and quality control to produce the best welding head. Through the analysis of the application as a finite element (FEM) of this process, our engineers will be acoustic properties and mechanical properties of the welding head of the perfect combination, design the products in line with customer needs. Each set of welding head and mould our production, whether standard products or customized according to customer requirements, are all made of the best materials and after repeated test. Welding head shape, intensity and audio etc. various parameters after many tests, can accord with the most stringent standards, welding head and mould achieve the most perfect match. Material is one of the main reasons to ensure the effect of ultrasonic mold life on welding products, and the process of mold completion is complicated. Therefore, not only the mold engineer design must carefully select material, but also need to understand its own product requirements, the use of what kind of material, avoid negligence and affect its timeliness and quality.
- Q:What kind of factory will use big ultrasonic plastic welding machine?
- Instrument factory, bumper factory
- Q:What kind of hot air plastic welding torch and plastic welding machine made in China? Used to weld plastic sheets and tubing
- The quality is imported, the price is expensive, the domestic good should be Wenzhou LANSITE welding equipment factory production of Lansite brand welding gun, plastic welding machines. You can go to Taobao to find out. The heater in their house is good
- Q:What's wrong with high ultrasonic plastic welding machines that have been overloaded?
- 1, no-load test, such as the normal operating current, may be exposed to welding welding head and welding parameters of objects or between the seat should not touch the regulation failure.2 、 no-load test is not normal(1) to observe whether there are cracks in welding, installation is firm(2) remove the ultrasonic welding machine welding head of no-load test, whether the exclusion is the transducer horn + problems, step by step out. The possibility of falling horn failure + transducer, the new head replacement to judge.3, sometimes no-load tests are normal, and can not work normally, there may be an internal welding energy original change, lead to poor transmission of energy, there is a relatively simple method to judge: hand touch method.The welding head or horn surface normal work when the amplitude is very uniform, hand is silky smooth, when the sound transmission is not smooth, it will have a bubble or burr feeling touch, then we must use exclusion to exclude parts of the problem. The generator is not normal, can also have the same situation, because normally detection transducer input waveform should be as smooth as a sine wave, sine wave can produce this kind of phenomenon is also the peak or abnormal waveform, then can be replaced with discrimination in a sound training element.
- Q:Ultrasonic plastic welding machine power, the better the better?
- This is not, the quality of the machine is not divided by power, the power of the machine welding more sophisticated products, the effect will be better.
- Q:Which brand is the best for ultrasonic plastic welding machine?
- To the collection of auxiliary equipment for plastic welding machine, plastic welding machine, the supply of a large number of users, different types of.
- Q:Ultrasonic plastic welding machine die is not durable, what material good?
- Ultrasonic plastic welding machine die is not durable, what material is good?Aluminium alloys (7075, 2024, 6061-T651):7075: generally used in vibration systems and HORN manufacturing, high hardness, thermal conductivity, good toughness.2024: generally used in HORN manufacturing, toughness, heat conductivity, hardness moderate, used in general welding plastic products.6061: generally used in the bottom mold manufacturing or low output of HORN, good toughness, hardness than 2024 times.Two, SCM8: generally used for embedded screws, metal inlay, excellent toughness, high hardness, heat conduction is 2024 times.Three, titanium alloy: generally used for the occasion of continuous vibration, high toughness, good heat conduction, high hardness, but expensive.
- Q:How many kinds of ultrasonic welding machine power are there?
- Is the power or frequency? Zhengzhou the Yellow River ultrasonic company has ultrasonic technology engineers, you ask him to ask, about the ultrasonic technology problems, he can answer you
Our company specializes in the production of ultrasonic cleaning equipment and plastic and metal welding machinery. with general application to electronics, electrical appliances,machinery,metallurgy,textiles,chemicals,toy,clothing,medicine.pharmaceuticals,clocks&watches,jewellery,spectacles,cars,electroplanting,packing and other diverse industrial processes and specializes in producing high quality beauty and health care equipment. There is a group of professional technicians.
1. Manufacturer Overview
||Guangdong, China (Mainland)
|Annual Output Value
||US$50 Million - US$100 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered
|Product Price Range
||High and/or Average