Pine/Poplar Core LVL Scaffolding Wood Plank

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
55 m³
Supply Capability:
5000 m³/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


Laminated Veneer Lumber is callled LVL in short and as one special plywood ,it has been widely used in packing ,furniture and building construction .



High bending strength

Strong nail holding

Moisture-proof and easy work.

Tight construction and high strength

No ratten or decay

Low formaldehyde emission

The productions are suitable for the construction of viaduct and tall frame building

If put in boilding water for 48 hours, it still glue sticking and still formed.

Products Details:

Pine/Poplar Core LVL Scaffolding Wood Plank

Pine/Poplar Core LVL Scaffolding Wood Plank

Detailed Specification:

1.Material : Poplar Core or Pine Core, etc. (Poplar Core LVL , Pine Core LVL).


2.Size : Maximium Length up to 8000MM,. Width up to 1500MM and thickness up to 300MM.


3.Glue:E0,E1,E2, WBP,MR .


4.Tolerance allowable :+/-0.5MM.


5.Moisture Content : 8%--12%.


6.Weight Density: 550 kgs each cubic meter -lvl.


7.Minimium Order: 1*20 GP for trial order .


Q1.How many times it can be reused?

A1: around 50 times if used abide by illustration strictly.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:For the plywood environmental advice?
E0 is the highest environmental rating. E1 grade glue to do the plywood can be used directly for the interior.
Q:Hard fiber board is also a density board
the same texture direction. Adjacent two-layer veneer grain direction should be the same. The plywood should be the same tree.
Q:Why is the plywood commonly used in the singular layer
if put a piece into a striped. (Then this time there will be positive is the pattern of wood
Q:What are the defects in plywood material?
Fissure check The short separation of the panel fiber usually does not start from the side of the board, not all extending through the thickness of the veneer.
Q:Defects are divided into four grades
It is generally judged by visualizing the allowable defects on the plywood. The grade depends on the permissible material defects, machining defects, and the requirements for splicing
Q:The structure of the plywood at the same time meet two basic principles
the fiber direction and the table are parallel to the long core plate or the middle plate. When forming a slab, the panel and the backplate must face outward.
Q:The density of the plywood is greater than that of the same kind of wood
The greater the unit pressure when gluing, the greater the density of the plywood. As the wood at high temperature easy to produce plastic deformation, hot glue gluing than the compression of the compression rate is greater.
Q:What types of plywood can be divided into?
Plywood with durable, resistant to boiling or steam treatment and other properties, can be used in the outdoors.
Q:What is the best way to fix multi-layer plywood?
The usual length and width specifications are: 1220 × 2440mm, while the thickness specifications are generally: 3,5,9,12,15,18 mm and so on
Q:What is a joinery board?
Blockboard core board should be the same species or similar properties of the tree species, water content of 6 to 12%. Core width is not greater than three times the thickness, do not allow a larger crack, holes and so on

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range