Specification of the Pine H20 Wood Beam
| Flange:||solid sawn pine lumber, thickness of middle LVL board is 27mm|
|Size of LVL bar||40x80mm|
| height: || 160mm|
|Density: || 5.0-6.0kg/m|
|Raw Material||pine LVL|
| Water Content||8--12%|
|Painting||yellow waterproof painting or as per request |
|Usage || construction formwork system|
|Standard lengths ||2.45/2.90/3.30/3.90/4.90/5.90m(Max.length:6.00m)|
|Modulus of elasticity ||E 11.000N/mm2|
The usage of the Pine H20 Wood Beam
The Pine H16 Wood Beam is main used to construction formwork, it is widly applied to slab/table
formwork system, wall formwork system, timber structures and temporary bearing structures.
Characteristics of the Pine H20 Wood Beam
A) Treated by WBP Glue(water-proof)
B) With high standardization, universal property, fast operation
C) High stiffness, light weight, strong load-carrying capability
D) Low cost and recycle resource
Best quality and great service of the Pine H20 Wood Beam
As a professtional company in this products, we supply products with the best quality and
competitive price. we have our professional workers and experienced team to promise the quality
and delivery date.
The following pictures of the Pine H20 Wood Beam for reference:
- Q:How do I bleach wood products?
- and then coated sodium bisulfite solution, repeat the above operation until the wood white. [PAGE]
- Q:Wood products need to use wood flame retardant?
- especially the high pressure impregnation method, is the most widely used in the production and the best way to flame retardant effect.
- Q:Wooden products marked above the letter engraved pattern with what machine equipment?
- Carbon dioxide laser marking machine in the wood above the standard color is generally black, marking no other colors. Software compatible formats are jpg, ai and so on. After the installation of the corresponding fixture can be carried out in different shapes of wood surface
- Q:Fiber laser marking machine can play wood material?
- Casually playing what can be the problem is good or bad is another matter, mainly to see the light absorption of the material. In a word, the marking machine is not a generic product
- Q:Wood products export inspection process is what?
- (Hereinafter referred to as: Commodity Inspection Bureau), according to the requirements of the Commodity Inspection Bureau will be sent to the designated fumigation company to do fumigation, generally for the inspection and quarantine of the company, according to the export contract invoice, to the inspection software to declare,
- Q:How to repair wood products broken
- 1, with a clean brush with a clean water, the use of white latex adhesive, and the force fixed, until the glue sticky solid. (Fixed by force: the vertical placement of the comb, both sides of the book or wood with a fixed, both sides of the book or wood block slightly shorter than the comb, add a 5-6 book pressure, pressure in the top of the book, Best to be softer)
- Q:the two materials of wood products contain a certain amount of water
- Many consumers think that the more dry the better wood, in fact, this view is biased. The moisture content of wood only in the deformity scale to maintain stability, the ability to protect the decoration does not emerge quality problems.
- Q:How to avoid wood deformation
- 3, to buy materials to be careful. When you buy the decoration of the wood, only eye view, hand touch can not determine the moisture content of wood. So someone lamented: If only by visual inspection, the moisture content of wood can be described as "immortal difficult to distinguish." In fact, some tips, can help you determine whether the moisture content of wood qualified. Generally dry and good wood features obvious weight significantly reduced, feel not cool, beat sound crisp, push the plan when the "rushing" sound, shavings fever, planing light. And high moisture content of the material is heavier, feel cold, pushing the planing sound is not brittle, or even shaving water. This kind of wood can not be used.
- Q:How do you print or pattern on wood products?
- 2, gelatin film on the original version of the paper on the rules line, multi-color version of the rules are used as installed version of the rules. Put the engraved version together with the original, placed in the appropriate position of the screen plate, according to the rules of the original rules of the rules of the binding rules with milky white paste attached to the screen plate, and paste with a paper sheet. There are several sets of color with a few screen plate set a unified rules. The original with the engraved version, placed in the rules of the board, put down the screen box, in the top of the screen with an iron aligned engraved
Gelatin version of the four corners of the edge of the ironing, so that gelatin version of sticky on the screen after the original release. Put some thick paper on the plate, put down the screen frame so that the gelatin carved paper pad flat, and then covered with a polyester film on the film from the role of the interval, with iron back and forth several times, so that gelatin film Hot on the screen. After a good version of the natural dry, and then peel off the liner and the use of ketone to the opposite side of the liner and the interval between the coated PVC overshoot scrub clean. If the version of the place can be used to retreat glacial acetic acid, if the knife edge of the knife marks and small strokes off, you can use the pen dipped in plastic repair.
3, nitro varnish modified film on paper version of nitro-varnish modified film on the version of the same method.
(5) closed network
The screen is about the screen outside the screen with colloidal sticky block up, so that the printing plate in the printing does not leak ink. Wax grams of film version of the network can be used nitro-varnish, gelatin solution can be sealed gelatin film version and nitro-varnish modified film version. The printed plate is printed and dried. Second, the photosensitive screen printing plate
- Q:What woodworking woodworking lathes can be processed?
- Ordinary carpentry lathes can be processed, CNC woodworking lathes can do. Ordinary carpentry can not be processed, CNC woodworking lathe can not do.
1. Manufacturer Overview
|Annual Output Value
||US$50 Million - US$100 Million
|| Europe；North America;Asia
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||51% - 60%
|No.of Employees in Trade Department
||Above 100,000 square meters
|No. of Production Lines
||OEM Service Offered；Design Service Offered
|Product Price Range