Photo-Electric Curtain Wall for High-rising Building

Ref Price:
Loading Port:
China main port
Payment Terms:
Min Order Qty:
100 m²
Supply Capability:
20000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Photo-Electric Curtain Wall for High-rising Building




The panel of this product is laminated glass embedded with photo-electric battery modules, which are connected with retroaction device to form a solar dynamoelectric system. This product is a new type building curtain wall integrated with solar dynamoelectric technology and curtain wall technology.




This product is applicable for building façade, roof and canopy.

It can convert solar energy into electric power which can be used by people through surface and space of building. It is a photo-electric integrative energy-saving product.




3.1 This product can apply different structural style and decorative effect according to different demand of clients. It can also realize the function of envelop, thermal insulation and sound isolation of traditional curtain wall.

3.2 Wind loading capacity, air tightness and water tightness must be determined in accordance with correlative national specification.

3.3 This product can convert solar energy into electric power. The conversion ratio is 10~15%. The dynamoelectric power at design peak value is 0.10~0.15kW/ m2,Export frequency is 50±0.5Hz,Voltage is 220±10%V,Wavy curve is standard sine wave,The distortion degree of the wave shall not exceed 5%.




This product can turn solar energy into electric power through  photo-electric battery by means of photo-electric effect. As a type of “Green Façade”, it can not only realize the purpose of decoration and envelop but also produce electric power to achieve Environment-protection and Energy-saving.

The dynamoelectric system of this product can be connected with civic electric web to provide electric power for the buildings. In the night or rainy days, the system this system will be shut off automatically and turn to civic electric supply web.




5.1 The selection of this product is the same as traditional curtain wall product. The architectural function and elevation effect shall be taken into account.

5.2 This product should be installed at the location where the sunlight can irradiate directly onto it chronically. According to the location of building, it is favorable to make the angle of incidence of sunlight smaller. The design of this product is intended to be convenient for maintenance and cleaning.

5.3 The glass panel battery of this product can be the compound of monocrystal line silicon, polycrystalline silicon and amorphous silicon. Among them, the conversion ratio of monocrystal line silicon is the highest, the next is polycrystalline silicon, and the lowest is amorphous silicon.

5.4The outer layer of the photo-electric curtain wall panel is super-white low- iron toughened glass and the inner layer is toughened glass.

5.5 The deflection of the glass should be restricted in the design.

5.6 Automatic switch device should be designed for the combined web between dynamoelectric system of photo-electric curtain wall and civic electric supply system.



6.1 Installation conforms to the requirement of JGJ102 and JG3035.

6.2 The conductor strip between batteries should be orderly, free of welding dregs and rupture.

6.3 The location of photo-electric curtain wall panel should be strictly according to the requirement of design to ensure the correct position of anode and cathode of photo-electric battery.

6.4 The installation of electric system should be in accordance with design drawings and the requirement of JGJ/T16.

6.5 The layout of cables should be reasonable and easy to  repair.

6.6 The start-up and debugging of photo-electric curtain wall should be completed by professionals. The operational regulation must be strictly carried out in the process of usage.

Detailed maintenance booklet should be provided.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Where can I buy glass to build an aquarium?
Depending on the size of the tank you want to build you may need to special order it from a glass shop as the thickness required for building a fish tank are not commonly available in glass shops. For instance, the tank I built was a 75 gallon standard size, 48"x21"x18" and it required 12mm or 1/2" thick glass. the taller the tank the thicker the glass needs to be.
Q:Any1 know wat that big glass building is next to City Hall in Cork???
i think its the new building for doing tax,bin charges etc. my friend thinks its a libary and i heard some1 else say it was part of the fire station so who knows....go in there someday thats the quickest way to find out!!!!!!!
Q:Want to build a fiber glass sub box, need opinion.?
you can take the seat out and then use a think foil paper and line under the seat then put a thin layer of fiber glass then let it dry and go from there also. * remember when your using the fiberglass your also gonna want to put a layer of bondo to strengthen the box but you do have a good idea also what ever works.
Q:Find the role of several new glass features, to concentrate a little Hurry Short point!
Energy saving glass Traditional glass applications in the building is mainly lighting, with the building doors and windows to increase the size of the doors and windows of the thermal insulation requirements are correspondingly improved, energy-saving decorative glass is able to meet this requirement, set energy-saving And decorative in one of the glass. Energy-saving decorative glass usually has a pleasing appearance of color, but also has a special light and heat absorption, transmission and reflection ability, with the building exterior wall glass curtain wall, can play a significant energy saving effect, now Is widely used in a variety of high-level buildings on top. Building commonly used energy-saving decorative glass with heat-absorbing glass, heat reflective glass and insulating glass.
Q:Why does the endothermic glass be cool in winter and cool
Can reduce the amount of solar heat entering the room through the glass, which is achieved by increasing the reflection of the sun (not necessarily the reflection of the visible light) and the heat absorption of the glass. The general color film mainly functions by increasing the absorption of sunlight , These colors can absorb the sun on the glass, thereby reducing the solar energy into the room. This film is only an auxiliary effect compared to our building insulation glass film. Building glass film covered with a layer of metal, this metal film, can increase the glass of light reflection and light absorption, which greatly blocked the solar heat in the glass window, the same reason, in the winter can make high temperature indoor heat is not out , To ensure comfortable indoor temperature.
Q:Does drop damage build up? (Glass)?
You should investigate what the amount of energy is required to cause a defect either in manufacturing or physical damage to initiate and propagate a crack. The defect may be improper heat treatment, a foreign inclusion, a void in the glass matrix, a nick or scratch in the casting process or in handling in the production line, for example. Each cycle of dropping could potentially have enough energy to further propagate the crack until full fracture is achieved, You may want to investigate fracture mechanics. .
Q:China's largest glass deep processing enterprises which
China 's largest glass deep - processing enterprises Taiwan Glass Group, China' s largest glass of the original film, architectural glass company.
Q:Building glass curtain wall energy-saving projects using the material re-inspection requirements
Curtain wall energy-saving projects in addition to the general requirements of the curtain wall for re-inspection of the material, but also should increase the performance of the following materials for re-inspection: thermal insulation material thermal conductivity, density; curtain wall glass visible light transmittance, heat transfer coefficient, Insulating glass dew point; insulation profiles of the tensile strength, shear strength.
Q:Window insulation film.
Hello: Insulation film is affixed to the inner surface of architectural glass to improve the performance and strength of glass, so that it has insulation, heat insulation, energy saving, anti-riot, anti-ultraviolet, landscaping appearance, to avoid privacy, security and other functions, Car glass and building doors and windows, partitions, roof and so on. The use of foil glass and the use of ordinary flat glass, tempered glass, semi-tempered glass compared to the security has been greatly improved. The third layer: anti-ultraviolet isolation layer; the fourth layer: radiation protection; the first layer: the first layer: transparent layer of plastic protective layer; Isolation layer; fifth layer: metal insulation film layer; sixth layer: AAA, PET base layer; seventh layer: fixed adhesive layer; eighth layer: antioxidant isolation layer; ninth layer: wear Coating layer; tenth layer: aerobic neutral coating. Paste the effect is very good, and will not affect the lighting.
Q:What is soundproof glass? What about the effect? How much is the price of one square meter?
Laminated glass structure Laminated glass is a safe glass production process, also known as laminated glass abroad, can be two layers together, it can be multi-layer together. Some laminated glass sun will dry for a long time later, this is because the use of wet folder method, so used in architectural glass laminated glass are generally used dry folder method, so you can avoid sandwich. Although the laminated glass has a good sound insulation effect, but still lacks, but in the middle of the membrane composition to adjust and after a professional technical treatment can achieve a very good sound insulation effect, which is hollow glass and vacuum glass can not match the place The Of course, sandwich insulation glass due to different manufacturers of different technical content, the resulting noise insulation effect is not the same. (Such as glass commonly known as "PVB glass"), it can be a high polymer as the main component of the KK superelastic interlayer (commonly known as the "glass"), which is the main component of PVB interlayer KK superelastic glass "). Sound insulation angle, KK hyperelastic glass sound insulation is significantly higher than ordinary PVB glass, because the PVB interlayer texture is relatively hard, not as high as the polymer film so soft and rich flexibility. And if the interlayer film in the laminated glass is very soft and flexible, it can increase the sandwich glass damping coefficient, thereby increasing the insulation of the laminated glass. Ordinary PVB glass sound insulation is only 28-34 dB, KK superelastic glass sound insulation can reach 35-40 dB or even higher.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range