PET Preform Making Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 100 Sets per Year set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Detailed Product Description of PET HANVOS Preform Making Machine (HW148)
1. Preform making machine(HW148)
2.Stable performance
3.Durable
4.Beautiful appearance
Main technical parameters of PET HANVOS Preform Making Machine (HW148)
Specification |
Unit |
HW148 | |||
A |
B |
C | |||
Injection unit |
Screw Diameter |
mm |
38 |
40 |
42 |
Screw L/D Ratio |
L/D |
22 |
21 |
20 | |
Shot Size(Theoretical) |
cm3 |
111 |
123 |
135 | |
Injection Weight |
g |
207 |
228 |
252 | |
Injection Pressure |
Mpa |
189 |
171 |
155 | |
Screw Speed |
Rpm |
0-166 | |||
Clamping unit |
Clamp tonnage |
KN | |||
Toggle stroke |
mm |
380 | |||
Space Between Tie Bars |
mm |
410*410 | |||
Max Mold Height |
mm |
450 | |||
Min Mold Height |
mm |
150 | |||
Ejector Stroke |
mm |
140 | |||
Ejector Number |
PC |
5 | |||
Ejector tonnage |
KN |
31 | |||
others | |||||
Max Pump Pressure |
Mpa |
16 | |||
Pump motor Power |
KW |
13 | |||
Heater Power |
KW |
7.5 | |||
Machine Dimension(L*W*H) |
mm |
4.6×1.3×1.8 | |||
Machine Weight |
T |
3.7 | |||
Fuel tank capacity |
L |
330 |
Switch languge to help reading:FrenchGermanItalianRussianSpanishPortugueseKoreanArabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
PET HANVOS Preform Making Machine (HW148)
MOLD LOCKING UNIT
l The burring , double-toogle three-link-rod five-hinged has the features of smooth motion ,large moving die stroke .
l Fine rididty, four-stage mode lock pressure, speed, defferential quick mode lock device have multiple means of ejection functions.
l Automatic centralized lubrication system.
l Gear regulating the mould driven by oil motor.
l Electrical &mechanical safety protection device.
INJECTION UNIT
l Dual-cylinder parallel injection;
l Low speed high torque oil motor directly drives screws to complete the pre-injection, with anti-dripping device.
Multiple-stage control for pressure, speed, position to inject, keep pressure, charge material
CONTROL UNIT
l It utilizes the plastic jetting-moulding machine special-purpose computer ,CPU work division control treatment ,the ejection.
l Clamp ,injection actions can choose linear displacement sensor for its control .
l It also real-timely monitors various actions and gives automatic warning for its defects.
l Multiple-unit plastic moulding data memory system.
HYDRAULIC UNIT
l It employs the imported hudrautic elements and components,uses the propotional pressure, propotional flow means ,offers live load dynamic force.
l Double injecting move jar vertical balance on both side of injection tube ,insured that spray nozzle can not be skew .
l The sealing is good and do not leak the glue.
l Low noise & rapid response oil pump system
l Adopt the cooling water flow distributor,controlling the cooling temperature easily.
- Q:What's the injection?
- I. work content:Run injection molding machine, take products, Xiao Shui kou. But now most companies are using mechanical hand, no operator switches the injection machine door.Two 、 brief introduction of injection molding:Injection molding is a method of producing shapes in industrial products. Products are typically molded by rubber injection and plastic injection. Injection molding can also be divided into injection molding, die casting and die casting. Injection molding machine (referred to as the injection molding machine or injection molding machine) is plastics molding equipment of thermoplastic or thermosetting material using plastic mold made of various shapes, injection molding by injection molding machine and mold.Three 、 injection molding process:The process mainly includes 5 stages: mould filling, packing, cooling, demoulding, etc..
- Q:How to calculate the capacity of mold injection molding?
- For example, the first mock exam two points mold cycle for 15 seconds, then 12 hours of production capacity is 60 seconds /15 seconds = 4 mode 4X60=240 per minute per hour 240X12 hour = 2640
- Q:I want to study and maintain the injection molding machine, but I don't know whether it's difficult or not. What are the main points I should pay attention to when I study?
- Put the book on a set up useful to you, as you said above, it is not a long time still can not find a reason, if you want to say, or to do a period of time, first understand the machinery, besides, school repair is not a day for two days to learn, only to do it will do. As for the main points is the classification to first distinguish fault, generally is the mechanical, electrical, hydraulic and other three categories, what process, just say not clear, if there are problems, done will be remembered
- Q:Does the injection machine have to use cooling water?
- If you just try machine you can not, if it is used in batches, otherwise the oil temperature will increase to a certain extent, such as the temperature of injection molding machine will alarm, high temperature of pressure and velocity is also affected.
- Q:What is the fluctuation of the screw speed of injection molding machine?
- Effect of injection molding machine screw on extrusion stabilityWith the increase of the head resistance, the characteristics become "soft". This kind of 'soft' characteristic is detrimental to the production location of the high extruder. 1KV system through the use of slotted bushing, significantly improve the extruder body trapped transport efficiency, making the extruder with "hard" characteristics, but the effect of screw speed fluctuation rate from convection angle, extrusion machine to be more "hard" screw speed fluctuation rate fluctuation influence bigger convection. From what has been said above, we can assume that the extrusion flow rate Q varies with the screw n. If the ratio increases or decreases, 1% of the screw speed fluctuations will result in 1% of the extrusion output fluctuations.
- Q:Domestic injection molding machine which brands are better?
- Haitian, Chun, etc. are good.High exposure... Shock bear, Iraq's secret, Bo Chuang, Donghua
- Q:Not computer, there is a proportional current. The whole machine has no hydraulic operation and the pressure gauge is zero.
- Oil pump is good, the current output is good, that is, no pressure, it must be converted from electrical signals to hydraulic parts of the action of the middle course of disconnection, or the overflow valve spool stuck, or the pilot valve of the electromagnetic iron ring broken
- Q:Injection molding machine brand
- NISSEI Nissei, the Japanese steel JSW, FANUC FANUC, Ube, Toyo Toyo, Toshiba Toshiba, Sichuan KAWAGUCHI, Sichuan, MITSUBISHI Mitsubishi, Sumitomo Sumitomo, Niigata Niigata, Sadegh (Sodick), Wu ling.
- Q:How to repair the injection machine?
- Common faults in the use of injection molding machines and solutions are as follows:Part 1: Problems and treatment methods of mould locking parts:(1) not locking dies:Handling method: 1) check the front travel switch of safety door and repair it.2) check the 24V5A power in the electric box, replace the insurance and the power box.3): check whether the spool is stuck, cleaning the spool.4): check whether the output of the I/O board, the solenoid valve is charged.5): check whether the hydraulic safety switch is closed, whether the mechanical lock rod is opened or not.(two) the opening and closing of the die machine:Handling method: 1) check whether the lubricating oil pipe is broken or, if so, reconnect the tubing.2): small amount of lubricating oil, lubricating oil amount increase, 50 die once or manually add oil and lubricating oil.3): clamping force, check whether the mold needs large clamping force, lower the clamping force.4): the current fluctuation of the amplifier board, check whether the current parameters meet the acceptance criteria, re adjust the current value.5): parallelism error indicator check head board parallelism is greater than the acceptance criteria; adjust the parallelism.
- Q:General injection molding machine agents need what conditions?
- See what brand you agent, big manufacturers brand trouble
1. Manufacturer Overview |
|
---|---|
Location | Shanghai, China |
Year Established | 2009 |
Annual Output Value | |
Main Markets | North America South America Eastern Europe Southeast Asia Africa Mid East Eastern Asia Central America South Asia Domestic Market |
Company Certifications | CERTIFICATE OF COMPLIANCE |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | NingBO |
Export Percentage | 51% - 60% |
No.of Employees in Trade Department | 6-10 People |
Language Spoken: | English, Chinese, Japanese |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PET Preform Making Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 100 Sets per Year set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords