Pet Non Woven Geotextile for River Construction

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
10000 m²
Supply Capability:
500000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Structure of Pet Non Woven  Geotextile Description:

 Geotextile Ecological Bag (Slope Bag, Afforest Bag) can be applied in slope engineering, completely replacing the stone, cement and other materials, to significantly reduce cost of project. After construction, slope will be covered by vegetation surface, to enable a green excavated slope surface, and formation of slope of natural ecology. Permeability through soil filtering, allows slope to be highly permeable, to prevent and stabilize soil loss, the local landslide, slope collapse greatly, to form a permanently high stability natural slope.

Main Features of Pet Non Woven  Geotextile

1).Ecohydraulic Engineering:

   Natural environment for both sides of the ecological river, soil and water conservation,reservoir fluctuation zone regreening, wetland project, coastal engineering etc.

2).Highway Engineering:

  Roadbed side slope,retaining wall project, massif excavate side slope,bridgepier slope protection,culvert exits  and entrances "Eight word" wall,sound protective screen, ecological isolation strip,swelled ground side slope,freeze thawing district side slope etc.

3).Railway Engineering:

  Roadbed side slope,retaining wall project, massif excavate side slope,bridgepier slope protection,culvert exits  and entrances "Eight word" wall,ecological beauty spot ecological district side slope,ecological fragile district ecological side slope etc.

4).Municipal garden engineering:

   Massif regreening,massif excavate side slope,urban center ecological river bank,pack lakeshore,puente hills landfill,mine regreening,golf course,gardening landscape wall,

saline-alkali soil side slope etc.

5).Real estate landscape engineering:

  Artificial landscape riverway,uptown side slope,gardening landscape wall,hydrophile retaining wall,

roof greening ,etc


 Slope body collapsed emergency manage,desert greening,natural reserves,the coast protection em

Pet Non Woven Geotextile Images


High Tensile  Non Woven Polypropylene  Geotextile for Road Construction


High Tensile  Non Woven Polypropylene  Geotextile for Road ConstructionHigh Tensile  Non Woven Polypropylene  Geotextile for Road Construction


High Tensile  Non Woven Polypropylene  Geotextile for Road Construction


Pet Non Woven Geotextile Specification

Specification of nonwoven   geotextile bag

weight g/m2






Breaking strength KN/M≥






Elongation at break ≥






CBR Mullen Burst Strength KN ≥







We have organized several common questions for our clients,may help you sincerely:

Q1: How about your company?

A1:Our company are one of the largest geosynthetic products supplier in the world.We have the products experience more than 20 years.Already export to USA/Germeny/Australia/Zambia/Brazil etc.more than 20 countries.Almost 10years.Our products including Geocell/Fiberglass Geogrid/Geomembrane/Geotextile/Geonet etc.

Q2:Can you send samples to us ? 

A2:Yes , free samples could be provided , but customer need pay for the freight cost . 

   After order placed , the freight charge could be refund . 

Q3:What’s your Payment term ?

A3:T/T , L/C , Western Union,Paypal ... 

Q4:What’s your manufacture process time ? 

A4:Usually within 20 days

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the requirement of HDPE geomembrane impermeable membrane welding work?
Q:How to weld imported geomembranes?
From experience, the following situations should be paid much attention to when you weld geomembranes. 1) When geomembranes should be welded into a concrete building but can't be placed directly, a connecting lock made from the same materials with membranes should be embedded into the building before the geomembranes. Then you can weld geomembranes by conventional method. 2) If there are pipelines to go through the membranes, you should check the size and number of pipelines and melt the HDPE membranes with the prefabricated pipe liners first to prevent seepage. 3) Followings are what I learned from the imported geomembrane melting training in Solmax. If the weather is bad or there is force majeure, the project of melting should be stopped for one day or more. At the same time processed HDPE geomembranes should be fixed by earthbags for damage protection.
Q:How does the effect of the electrothermal film for heating?
The geothermal heating is successfully applied in the developed countries, being regarded as the most ideal and advanced heating method in the field of heating and ventilation in the world. Natural law and practice proves that the electrothermal membrane heating heating is a new, scientific, efficient, environmentally friendly, safe, economy and energy saving of heating methods. It is the inevitable trend of modern residential heating.
Q:How to deal with oil slick on fish tank?
The reasons that there is a layer of oily dirt on the surface of the water: 1. tap water contains small amounts of impurities and organics, after staying in the tank for a period of time, the organics and grease dissolved in water and surfaced. 2. 80% of the algae components are "oils". After the death and rotting of algae, oil would be dissolved in water, and then surfaced. When infusing new water, it will rush out oils attached to the aquatic plants and cylinder wall, and then surfaced to generate oil slick on water surface. 3. Oils generated by wreckage of microorganism or old waste, residual feeds, and other organics. When there is no water flowing, the oil slick is the worst. 4. The filter materials in filters are too dirty so as to spill oil. Influences of water oil dirts: 1. impede exhaust gas or water temperature escaping, give rise to early deterioration of water quality and increase water changes. 2. obstruct light source into water, affecting photosynthesis of plants. Solutions: 1. Using the oil slick processor to make the oil slick into the filter, and then using the filtering cotton in the filter to adsorb, at last decomposing bacteria by nitrobacterium. 2.Collect oil slick in the cup slowly and then discard it. 3. Use oil-absorbing sheet to absorb, put an oil-absorbing sheet at the opposite corner(oil-slick aggregated area) of water outlet to absorb oil slick. 4. Install trumpet funnel commingler to absorb oil slick, mix it with water, and it will be decomposed through absorption by filtering cotton. 5. Remove contamination in the filter. 6. Feeding fish which lives on oil such as highfin coralfish or black mollyack, which can reduce the film production. 7. The most recommended and the only way of tackling the problem is to establish a stable biochemical system.
Q:What types of work does geomembrane welding belong to?
It should be a plastic welder
Q:what is the role that Imported HDPE geomembrane plays in impermeable reservoir bottom system in the landfill.
Basically no use.
Q:What is the operating principle of wet membrane humidifier
wet membrane humidifier transports evenly the water to the top of the wet membrane by the water pump and distributor water, under the action of gravity, the water is downward penetrated along the wet film and come back to the main water tank to form a circulation. When the dry air passes through the wet film, the water fully absorbs the heat in the air to occur the vaporization and evaporation, so as to achieve the purpose of air humidification. In this process, the air humidity increases and the temperature drops, but the enthalpy is constant.
Q:How to measure the thickness of the paint film?
The agnetic thickness measurement method can be used to measure the magnetic metal matrix: The thickness of the non magnetic coatings on steel, iron and nickel: Zinc, chromium, paint, electrophoresis, enamel, rubber, powder, enamel, coating, etc.) B. To use the eddy current thickness measuring method and nondestructive measurement of non magnetic metal (such as: Aluminum, copper, stainless steel) on non conductive coating thickness (such as: paint, powder, plastic, rubber, enamel, enamel, coating, etc.)
Q:What's the stick membrane methods of waterproof mobile?
the stick membrane methods of waterproof mobile phone: packaging equipment of mobile phone stick membrane: 1, damp cloth, fiber cloth, dedusting paster, phone protective film, scratch cards and changing the stick membrane labels, steps of phone's stick membrane, to clean the screen: 2, wipe the screen with damp cloth, rub back and forth for multiple times, try best to wipe the phone to clean, damp cloth will clean grease and fingerprints of the screen 3, wipe the screen with locomotive fiber cloth, do not worry about dust or wool stuck on the screen, following links can be handled 4, using locomotive dedusting paster to clean stubborn dirt, dust or wool can be affixed to cleanly, steps of mobile phone stick membrane, second step, screen stick membrane: put the phone protective film out of the packaging, directly place the phone protector on the screen and feel the bonding situation of stick membrane and screen, the position of stick membrane, 5, there are two labels on phone protective film, firstly, tear 1 label and stick the phone packaging film to the phone screen, 6, notice to align the hole and the edges of phone screen, and the hand should not be sticked to the phone screen. 7, after stick the packaging film to the screen, tear 2 label, 8, if there exists bubble, you can use locomotive scratch cards to scratch the bubble on the screen, eliminating the bubbles, 9,( if there are bubbles can't be scratched out, you can stick the stick membrane with cleaning paste, then scratch the bubbles with scratch cards) 10, wipe the screen with cloth, the whole stick membrane process will be finished.
Q:Who knows the repair method of membrane switch?
It can only be tested with the help of schematic circuit of the membrane switch. It is usually the shift knob that goes wrong. If there is no schematic circuit, you can only find out the problem by yourself. Membrane switch is actually a trigger signal to the IC. It is mostly a line or an array. This problem is rather obvious and easy to find out, but generally when membrane switch goes wrong, there is no way to repair but switch to a new one.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range