PE protective flim TR-60

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Total Thickness (adhesives + carrier): 60+10%micron
Colour: clear
Density 0.95g /cm3
Tensile Strength (Long): >10Mpa
Tensile Strength (Trasv):   >8Mpa
Adhesion (to stainless steel):100g/25mm
Elongation at break-MD:  >200%
Elogation at break-CD: > 350%  
Static Shear 23 DC: >48 hours
Storage: 35 DC
Humidity: 80%
Shelf: 6 months

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Why must the protective film on plastic steel window be torn off?
The main carrier of protective film is plastic. Generally, the protection film on plastic steel window are mainly made from raw materials including PE, OPP, PET which will be easy to get aged after a long time. Therefore, it's necessary to tear off the film in time.
Q:How to remove the residual glue of the protective film on acrylic board?
You can gently wipe it off with alcohol. Remember to keep good ventilation to volatilize the alcohol.
Q:Do I need to tear off the protective film on the two sides of the refrigerator?
Tear it off!!!! It will help heat dissipation and improve effeciency.
Q:Is there any skillful way to remove the protective film on aluminium-plastic panel?
It will be really fast to remove it if you heat it with electric hair drier at the same time.
Q:Cover the surface of metal plate with protective film.
The film itself may be coated with a layer of glue. Thus it's no need to use other adhesive tapes. If you use double-sided adhesive tape, I recommmend this kind. This kind of tape won't fall off even if it ages owing to damp and high temperature. If the film feels not adhesive, it doesn't mean it's not coated with glue because generally, the adhesion of protective film is very low that you can hardly feel it.
Q:How to cover the screen with protective film? What tools and skills are needed?
1. Wipe away the dust on the surface of the screen with the fibrous cloth attached at first. When you wipe the screen, you should wipe in the same direction. Don't do it back and forth. 2. Then determine the direction in which you will stick the film. And peel down a small part of the release film marked as "step1" and get ready to stick it. 3. When you stick the film, you should peel down a part of the release film and align it at the screen. Then stick it to the screen and tear the release film at the same time until the whole film is sticked to the screen. 4. When it's done, tear off the second layer of release film marked as "Step2" . 5. Finally completely tear off "Step2" release film. Then you can use it without worry.
Q:Is it necessary to tear off the protective film on surveillance camera?
The image will be clearer if you tear off the film. But of course it won't affect too much if you do not.
Q:How to clear the protective films on ceramic tiles?
There are three types of protective film used on ceramic tiles: The first one is plastic thin film which can be slowly torn by hands or gently rubbed off with steel wool; The second is anti-fouling protective film which can be wipe off using towel with white cement; The third is wax protective film which can be wipe off with dry towel with electric diluent, lacquer thinner, talcum powder or white cement.
Q:How to define the adhesion degrees of protective film?
At present, there's no such internatinal standards. Each company has its own standards. It's for reference that the adhesion of protective film is usually classified into four degrees which are slight, low, meidium, and high. Generally, 0.02-0.1N refers to slight degree; 0.1-1N,low degree; 1-2N, medium and 2-6N, high. But this is not always the same. It depends on the requirements of themanufacturers.
Q:How to remove the protective film on PCM plate in a quick way?
PCM plate can be coated with film using machine. But you can only tear off the film by hands. There is no such machine that can remove the film for you.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range