Q:How to remove the protective film on stainless steel door after using for a long time?

Use electric hair dryer.

Q:What are the requirements for PE protective films?

The excellent mechanical properties: meet user requirements of tensile strength, elastic modulus and elongation etc..

Q:The liquid crystal film 30, with nearly 2 years, won the time spent a lot of effort, to pull down the screen. Find the right way. There are usually sticky stuff with the tape can be protective film. Mobile phone screensavers all inclusive plus 50 more than ah

You use the screen film, may contain glue, with a hairdryer first baked "attention distance", after heating relatively easy to peel! Ordinary adhesive tape can not be used as a screen film, it is recommended not to use!

Q:PVC protective film and weaved cloth, which is better to protect floor?

You'd better use cotton PVC film. But it's expensive. Using ordinary gypsum board is also okay. You can cover the edges of the board with tape.Its cost performance is high. And it's really durable.

Q:Excuse me, the protective film on standard door has what method to clean up?

: used in the textile industry with cleaning agents (bottled called A1) can be removed.

Q:Why is PET anti-static protective film developed so well?

And PET material is hard, easy to volt and so on

Q:why do some marks appear on the suface after PC+ABS specular products are coated with protective films?

The phenomenon occurs because film is covered unevenly when some parts are perfectly coated but others are not. In such a condition, the PC+ABS material changes as the temperature and humidity change, forming bubbles. Of course, there's something to do with the glue of the protective film. If highly required, protective film must use specific glue.

Q:Especially the flat screen, not the kind of concave down, how do not stick askew, and no bubbles; in the screen paste slightly smaller than the screen situation, and how to start?

2, and then determine the direction of the paste, and tear the small part marked "step1" off the film, ready to paste.In 3, when the first tear paste, part of the "release film" at the screen up, then side welt tear, until completely stuck.

Q:Can non-sticky table tennis racket be coated with protective film?

This is a very simple method. But I assure you it works. Use damp towel to wipe the bat to clean it. And then coat it with protective film when it's still damp.

Q:What material is used for the adhesive film of the protective film on the aluminum plate?

The protective film on the aluminium plate is made of PE thin film. Specifically, the film is co-extruded by three layers of thin film. The film can be sticked to the aluminium plate to protect the surface of the aluminium plate from unexpected scratches and damage after it's covered with glue. If you want to learn more about PE protective film, you can go to the PP forum. There are many insiders who are specialized in this field.