1.Pure white balance
5.Big led chip:Red 12mil,Green and Blue 13
Outdoor advertising led screen P16 full color led display module details:
Outdoor full color led display: perfect vivid image, super brightness,long life span and stable work, waterproof, support any format of video etc; led dispaly cabinet design for easy install and dismantle.ISO& CE certificates, best quality, best price.
Quantities of module
Best viewing angle
17cm can adjustable
Remarks: cabinet size can changed, upon project need.
Average power consumption
Max. Power consumption
Pentium4 or above
Main technical parameter
Constant Current driver IC
256 levels of each color(R/G/B)/16.7M color
Brightness of white balance
More than 8000cd/sqm
256 levels of each color(R/G/B)by software
Operating ambient humidity
DVI display card+full color controller card
Tolerance of interpixel ≤0.3mm
Tolerance of modules clearance≤0.6mm
Unshielded twisted pair net line transmission distance 100m, max transmission distance 200m.
Multi-mode Optic fiber transmission distance 500m;Single-mode optic fiber transmission distance 10KM
LED media player
- Q:IPS screen and LED screen difference
- LED is the backlight, longer life, lower cost, with TN screen you slightly higher performance, LED performance is good, high dynamic contrast. The disadvantage is too bright, a little hurt eyes. Now the mainstream are used LED screen, short response time, suitable for playing games.
- Q:16: 9LED What is the approximate size of the display?
- Ie the effective screen is the diagonal size representation. And the aspect ratio of 16: 9 is that we say widescreen, the unit is inches. From this we can calculate the scale factor. (The old TV used in the ratio of 4: 3 also we said the narrow screen)
- Q:LED display applications are what
- Securities trading, financial information, airport flight dynamic information display, port, station passengers, sports venues information display, road traffic information display, dispatch command center information display.
- Q:LED display screen appears black? How to solve?
- see whether the motherboard was burned signs, the general motherboard above the capacitor above the fever and a little black charred situation, the motherboard may be burned the situation. It is recommended to take professional maintenance to detect the next. Under normal circumstances the motherboard is burned fan will not go to the. User self-test under.
- Q:LED display power can not be displayed properly
- Check and confirm that the serial cable used to connect the controller is loose or off. (If the black during the loading process, it is likely that because of this cause, that is, during the communication process due to loose communication line and interrupted, so the screen black. Do not think that the display body is not moving, the line can not be loose, please It is important to check the problem quickly.
- Q:Is the TV screen good for the LCD or the LCD?
- Although the cost of CCFL is not high, it is about ten yuan, but the maintenance staff will certainly open a high price to help you ), The operating voltage is lower (LED in 2V ~ 4V can work, and CCFL tube needs nearly 1200V high voltage to start, so need to use a special inverter circuit to provide high voltage. Inverter circuit is easy to bad.
- Q:What is the thickness of the led display?
- The thickness of less than 75mm, with the aluminum. Can also be thinner but the material is not easy to find.
- Q:What is the difference between an LED display and an LCD monitor?
- Notebook LCD screen commonly used is TFT. TFT (Thin Film Transistor) refers to the thin film transistor, each of the liquid crystal pixels are integrated in the pixel behind the thin film transistor to drive, which can be high speed, high brightness, high contrast display screen information is the best One of the LCD color display devices is now the mainstream display device on laptops and desktops.
- Q:Led display speed how to tune
- When installing the LED bar screen software, enter the text that needs to be displayed in the blue edit box. After the text editing is finished, click "Frame Properties" to pop up the following dialog box to set the frame properties. Display speed 1 fastest, 16 slowest. After setting the current frame, you can point to "previous frame" or "next frame" to move to another frame. After all the parameters of the frame are set, click the "Exit" button to return to the main window.
- Q:LED display power supply how to configure how many units with the plate is calculated.
- Upstairs are said that the P10, if you do not use the P10 it I tell you how to calculate the power of a board. Generally you take a lamp beads 0.02A to count, a board on the total lamp beads * 0.02, if the board is 4 sweep with the band / 4,8 sweep of the 8, the static is not removed to get a board of power
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range