Outdoor WPC Decking Wood Plastic Composite Decking Manufacturer /Direct Factory

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
300 g/m²
Supply Capability:
10000 g/m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1> What is WPC?

 

WPC, simply for wood plastic composite.

Wood Plastic Composite is made from a unique combination of plant fiber and recycled plastic

according to high-tech formula.

It offers the best advantages of plastic and wood. The plastic shields the wood from moisture and

insect damage, and the wood protects the plastic from UV damage and gives you a natural feel.

It has characteristics of high strength and rigidity, acid and alkali resistance, corrosion resistant

and without formaldehyde, it is a real green environment protection building material.

 

2> What’s WPC used for?

 

WPC can be used for military equipment, urban utilities and landscaping, architecture,

gymnasiums, outdoor decking, fencing, pallets, indoor and outdoor decoration.

 


 

 

 

 

FAQ

 

  

3> Why choose WPC decking?

 *Natural colour 
 *Slip resistant 
 *Resistance to water, rot and crack 
 *Guaranteed to last 
 *Low maintenance 
 *Beautiful and broad range of finish

 

4> What are the main kinds of WPC currently?

 *WPC decking board 
 *DIY decking board 
 *WPC wall panel (wall cladding) 
 *Garden fence (railing) 
 *WPC outdoor furniture (gazebo, pavilion, outdoor desk&chair, dustbin, pet house…)

5> Ingredients of WPC?

 

30% HDPE+60% bamboo/wood fiber+10% Chemical additives.

 

6> How’s WPC made?

 Outdoor WPC Decking Wood Plastic Composite Decking Manufacturer /Direct Factory


7> Specification of WPC?

 

A. Weatherability 
suitable from -40° C to +60° C, UV resistance 

 

B. Test Data

Testing Item Technical RequirementsValue of Test
Water Content % ≤2  0.4

Rockwell Hardness (HRR)

 ≥6080 

Thickness Swelling after

Water Absorption (%)

≤1 0.2 

Screw Holding 
Capability (N)

Surface of board ≥13003870 

End of board ≥12003460

Static Bending 
Strength(Mpa)

≥2028 

Bending Elastic 
Modulus(Mpa)

≥18004610 

Abrasion 
Resistant(g/100r)

≤0.080.06 

Hammer falling impact in low

temperature, broken (pcs)

≤1

State after Heating

No babbles, cracks and pockmarks

-

Rate of Size Change with Heating (%)

±2.5-0.38~-0.45



Report Number: 201107126 
Type of sample: 90x25x820mm, Solid 

 

C. Surface treatment

Outdoor WPC Decking Wood Plastic Composite Decking Manufacturer /Direct Factory


D. Main colors available:

landscape use wpc CMAX H150H25C

charcoal-black; classic-white; rinforest-canopy;sand-castle; stepping-stone; tree-house; vintage-lantern .

 

E. How to install

 

 Outdoor WPC Decking Wood Plastic Composite Decking Manufacturer /Direct Factory

 

 

Company Information

 

  

8> About CNBM and It’s WPC products

 

China National Building Material Corporation (CNBM), long history since 1984 is one of the top 
fortune 500 corporation and central enterprise with total assets of more than $20 billion and 
120,000 staff. 
 

Our unique advantages: 

* Preferential payment terms 
* Good and reasonable price 
* Quality guarantee -- CNBM won't let a single small deal ruin our reputation and brand, so quality is

our lifetime. 
* Professional team for CRM order processing & QA & logistics 
*Global logistic database, originated from Dubai



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Green floor
Green on the floor environmental protection level is E0 formaldehyde release as low as 0.2% As for the quality of the substrate used to large sub-substrate, manufacturers commitment to warranty for 15 years, I was using the distinguished molded series E0C211 #, installed to the home effect is not bad. No height difference and other technical problems, quite like!
Q:Floor Joist Sufficient?
No, the floor joist are not adequate. The rule of thumb for residential floor systems is the span of the joist does not exceed the height of the joist. So, a 2x12 maximum span is 12', 2x10 is 10' and so on. Plus, you mentioned added sub floor and ceramic tile - this just adds to the live load on this floor. The supporting wall for the 2 levels above is most certainly going to need the floor joist under it supported. You will have 1 floor joist carrying this added weight of the new wall even if it does not carry much weight from the above 2 floors already in place. Then you add the occupancy load and tables/chairs for a restaurant. Your floor is going to shake every time someone walks across it. What you need to do is go into the basement/or crawls space and install a floor beam perpendicular to the existing floor joist and install it right at the center of the span. Anyway - No, it won't hold the load you have in mind.
Q:How long the floor has just finished playing wax can step on
Do not walk on the floor as much as possible. Drying usually takes 20 minutes to 1 hour. If there is leakage coating, to make supplementary coating. Such as the use of two waxing way, the second smear, the first complete after the dry. Every 6 months or so to play a wax, you can keep the floor a long time beautiful. The surface of the floor and the moisture in the groove are completely dry for waxing. Depending on the season, the time required varies, but it takes roughly half a day. If not fully dried, the floor wax will not be closely attached to the floor surface, affecting the appearance, resulting in whitening phenomenon.
Q:Eco friendly floor cover, warm and soft underfoot?
Go for cork tiles. They meet all of your criteria.
Q:Leveling a floor?
if your Flores are unlevel and loose you will need to fix it from underneath the house. this is not hard to do but it is hard work crawling around under the house . but a great workout for the abbs
Q:easy way to remove old laminate flooring??
Yep, I had to do this a couple of years ago...it was a piece of work, got a scrapper with only an 8 inch blade (in hindsight, I should have gotten a larger one, too for the bigger areas), get a gallon of adhesive remover while you're at the hardware store, too. You will work hard to get it off but, it does take some elbow grease and some well deserved breaks! The adhesive remover softens the dried glue making it a ton easier! And be careful scraping that you don't chip the concrete foundation (if that is what you have underneath) Good Luck!
Q:How to I get orange glo of the floor?
Your best bet is Murphy's Oil Soap, mixed as directed for floors. Use hot water and a well-wrung mop so that the floor dries quickly. If that doesn't work, or you want another solution, then keep in mind that you need to find something strong enough to cut the oil in the orange glo, without damaging the wood floor. Hot water with a tiny amount of dishwashing liquid (not enough to need rinsing) or hot water with a cup of vinegar would both be safe for your floor, and might remove the oil with a few tries. In the future, don't use any furniture polishing products on the floor, in addition to problems like this, the floor will be slippery and dangerous to walk on.
Q:How to ceramic tile a floor?
After you strip the floor you will need to make your it is sound and secure. You need a smooth clean surface. For a bathroom you need dura roc or hardie backer as an underlayment. You will need to do a dry setting of the tiles. That means lay the tiles out to figure the best pattern and get an idea as to space etc. once you know how you want the tiles laid start cutting. You will need a mastic/thinset to set the tiles...whichever one you choose just follow directions. The directions will tell you what size trial you will need to spread the mastic/thin set. as you set the tiles insert spacers they come in different sizes. after all the tiles are set, let sit for 24 hrs. clean out any grout lines and remove the spacers. now you are ready to grout. grout comes in different colors and there is a sanded grout and a non sanded. When you buy the tile ask the sales person which grout you need for that tile, sanded or non sanded. some tiles will scratch with sanded tile. follow directions on the grout. make sure you wipe of any clumps of grout or it may not come off. lightly wipe extra grout as your grouting. there will be a haze over the tiles. you can wipe over the tile very lightly every few hours.
Q:How my world made the birch wood flooring
First on the table to break down the four wood, and then put the board on the table Pendulum method is as follows: the table is divided into nine lattice placed in 123 can, 456,789 can also ask you the way you Want to play multiplayer MC? Think of the words to discuss the Q group it:
Q:Do I really need to use transitions when installing laminate flooring?
Yes you must for a couple of reasons. One is to make a clean transition to another surface or area. It allows the floor to expand and contract normally. Another is with that much laminate it will expand/contract a lot and they are needed every 20/25 ft as per your particular laminate calls for. If you don t , the whole floor can expand enough and actually lift off the floor. Also not putting in the proper transition strips may very well void warranties on the product. Any questions you can e mail me through my avatar, I ve attended several installation seminars as well as installed a couple 100,000 s/f. GL

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range