Q:Integrated wiring, the floor wiring room between the two patch panels and switches with specific jumper is how to connect?

2.5 square aluminum, overhead safety load is 25A, single-phase available 5KW. The safe flow of the pipe is 15A. Single phase available 3KW.

Q:24-port module patch panel and 110-type patch panel in the use and function of what is the difference More

3 core 35 square line BV, BVR, BLV threading tube with a nominal 40mm tube can be. Provide a form for your reference:

Q:A 120-way program-controlled switch two outside the phone a 25 pairs of telephone cable (do internal phone) 4 110 patch panels (patch panels there are many small modules) between them how the connection is more

The lines of the program-controlled switches and the terminals are pressed down to the module and then connected to the telephone exchange and terminals with jumper wires.

Q:A sub-eight splitter, behind the link ONU equipment, which also need to add fiber patch panels, or can be directly connected?

Laying the horizontal length of the path, the vertical length and the specified additional length, the reserved length (see the link page)

Q:What is the patch panel used to do? Will the room be equipped with a patch panel? What is the cable stand? More

the control cable Uses: mainly used for transmission control, measurement signals and other cables

Q:Integrated wiring system, the cabinet voice and network i network distribution frame must be arranged separately?

. fiber optic transceivers or optical transceiver, optical transmitter, etc. . the modulator (depending on the network needs) light passive equipment: . accessories, patch panels, etc. (fiber connection wiring) . cable, Fiber optic jumpers (FC / APC.FC / PC.SC / APC.SC / PC.ST.LC / UPC, etc., according to the network design using fiber jumpers) adapter, etc. . accessory accessories cable box, fiber terminal box ,Thermal casing

Q:Is the patch panel in the weak battery a telephone and network wiring cabinet?

Patch panel sub-network patch panels and telephone patch panels, basically the network cable and telephone lines in the color hit the patch panel, and then through the jumper connected to the network switch or telephone exchange. Patch panel is to contact the terminal and switch the middle of the equipment, it is best to look at the physical room, the theory of practical contact with the fast.

Q:Network patch panel when the phone patch panel how to solve the line

Electrical equipment mainly refers to transformers, reactors, capacitors, combiners, circuit breakers, transformers, surge arresters, coupling capacitors, transmission lines, power cables, grounding devices, generators, adjust the camera, motor, closed bus, thyristor

Q:What is the router installed on the fiber patch panel?

Optical router to fiber optic patch panel as long as a fiber jumper can be, and your fiber patch panel should have a flange, there is no need to have a, where the flange is connected to fiber jumpers and fiber patch panels In the fiber head (this is

Q:In the horizontal subsystem of the integrated cabling system, the total length of the cable from the information outlet to the patch panel can not exceed () meters, can you tell the reason?

The trough bridge is sealed, with a rectangular or square cross-section, with a cover plate, plastic and metal. Generally used for fire, moisture, dust, anti-interference, anti-mechanical damage and other places. Ladder bridge like ladder-like open, easy to heat, are used for more cable, high temperature requirements of the place.