Material and Craftsmanship of Outdoor Lamp Post top YSG020A
*Housing of Top Head: Cast Good quality Aluminium Alloy Housing
*Lens: Impact resistant clear Color GLASS, High transmitance.
*Reflector: High-purity Specular aluminium.Spun or punched. Treated by Anodic oxidation.
*Seal: Rubber. High Temperature Resistant.
*Fasteners: Stainless Steel.Rust & Corrosion resistant.
*Post: Steel,hot-galvonized both inner side and outer side then power fuse coating.
*Finish: Polyester powder fuse coating is standard & UV Resistant;
Option: Polyester powder fuse coating, Black, Bronze, White, Green, Blue,GA(Hot dip galvanized),other finishes are available upon request.
65W for YSG020A
150W for YSG020A
- Q:18 150W LED cast light lamps installed in the 25 meter high pole lamp is bright enough, how can be irradiated
- 25 meters high enough to light lamp, lamp light angle smaller, the irradiation range depends on the quality of lighting and light emitting angle. Recommend the upcoming special production of high-power LED lamp handing LED
- Q:How to select suitable driving power for LED street lamp?
- A high pole lamp power, there are some low power courtyard street lamp, a power voltage, there are low, are prone areas in lightning, so the constant current drive, not only good performance, but also can be good heat dissipation, anti lightning, anti rain.
- Q:How much illumination can the 200 Watt LED projector reach 30 meters?
- Generally speaking, LED light projection angle 120~180 degrees, 200W LED lamp in the 30 meters position, the projection area in the ground should be about more than 100 square meters, the higher the lumen of the light, the more bright the ground. Perhaps this involves some calculations and the specifications of the lamp itself.
- Q:Pole 25 meters high, 100 meters in diameter required W
- Single disc high pressure sodium lamp 12*400 watts or LED12*200 watts can
- Q:What's on the lamppost of the LED street light? What is the function?
- LED street lamp poles are: cross flow source, the role of the current stability, so that the light effect to achieve a stable effect, as well as variable pressure.
- Q:To achieve the following functions of LED lights, what knowledge do you need to use?
- The power of the driving power is left with the proper allowance and the hard quality is required.
- Q:Why high pole lamp control switch to the specified time to advance light
- Is the old lamp light source lamp, unlike the current LED light power immediately lights, lamp needs time to preheat, light up slowly, so need to ensure optimal brightness light requirements in time.
- Q:What is in the lamppost of the LED street light?
- The cross flow source acting on the current steady light effect reached stable effect and pressure welcome to Yangzhou Henghui lighting equipment Co., Ltd. cooperation the company specializing in the production of LED street lamp solar street traffic signal lamp and high power LED
- Q:35m lamp (18 light 2) to put much LED light? To meet the diameter of 200M
- The white light projection lamp 1000W is suitable for being installed in the football field, the leisure square, etc., and the advantage of the white light is that the distortion is not yellow, but the illumination range is wide and the transmittance is good. And the LED lights, light efficiency, energy saving, environmental protection, expensive, high-power LED lights installed, heat dissipation technology can not pass, in such a high place is still not appropriate. I hope it works for you. Shengda street lamp dedication.
- Q:LED lamp configuration with traditional lamp compared advantage?
- There is not a kind of ah, LED energy saving, environmental protection, small decline. Good but generally high pole lamp lumens, with lamp and light, do you want to compare LED and sodium lamp? LED has a relatively long life, about two times that of sodium lamps
Our industry leading vertical integration in every aspect of our manufacturing process includes design, engineering, tooling, manufacturing, finishing, assembly and shipping.Superior quality is carried through all parts and processes. Superior quality, reasonable price, and customer first is the slogan of our production.
1. Manufacturer Overview
|Annual Output Value
||US$1 Million - US$2.5 Million
||North America; South America; Southeast Asia; Africa; Oceania; Mid East; Eastern Asia; Western Europe; Northern Europe; South Asia
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range