Optilite/Optisolar/Optiselec A series Ultra-clear Glass
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 watt
- Supply Capability:
- 500000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Introduction:
LOW E GLASS is a member of the coated glass family coated with one or more layers of metal or compound films on the quality float glass by using magnetic sputtering method. It has low thermal conductivity and high light transmittance, ensuring visible light transmittance and reducing light pollution based on prevention of heat losses. LOW-E Glass is widely used in large-sized curtain wall and decorations because of its luxury, comfortable and energy saving features.
FEATURES:
High efficiency in energy saving and environment production.
Wonderful performance in visible light transmission.
Stable chemical performance.
Stable performance in thermal processing.
Stable mechanical performance for solid coat, high abrasion and scratch resistance.
When processed into Insulated Glass, it is not necessary to clean up edge coat.
FEATURES:
High efficiency in energy saving and environment production.
Wonderful performance in visible light transmission.
Stable chemical performance.
Stable performance in thermal processing.
Stable mechanical performance for solid coat, high abrasion and scratch resistance.
When processed into Insulated Glass, it is not necessary to clean up edge coat.
Product Configuration | Colour | Tvis% | Visible light | Solar energy | U-value(W/m2.K) | SC | SHGC | LSG | |||||
Rvis% | Solar | Air | Argon | ||||||||||
Out | In | Tsol% | Rsol% | Winter | Summer | Winter | Summer | ||||||
Optilite/Optisolar/Optiselec U series(Ultra clear Low-E insulated glass) | |||||||||||||
6Optilite US83+12A+6UC | Neutral | 80 | 13 | 13 | 57 | 23 | 1.80 | 1.80 | 1.57 | 1.55 | 0.68 | 0.59 | 1.36 |
6Optilite US83+16A+6UC | Neutral | 80 | 13 | 13 | 57 | 23 | 1.86 | 1.59 | 1.62 | 1.36 | 0.68 | 0.59 | 1.36 |
6Optilite US1.16+12A+6UC | Neutral | 83 | 13 | 13 | 60 | 30 | 1.74 | 1.72 | 1.48 | 1.35 | 0.71 | 0.62 | 1.34 |
6Optilite US1.16+16A+6UC | Neutral | 83 | 13 | 13 | 60 | 30 | 1.79 | 1.48 | 1.54 | 1.16 | 0.71 | 0.62 | 1.34 |
6Optisolar UD65+12A+6UC | Grey | 61 | 15 | 16 | 31 | 29 | 1.72 | 1.69 | 1.45 | 1.39 | 0.39 | 0.34 | 1.79 |
6Optisolar UD65+16A+6UC | Grey | 61 | 15 | 16 | 31 | 29 | 1.76 | 1.44 | 1.51 | 1.19 | 0.39 | 0.34 | 1.79 |
6Optisolar UD70+12A+6UC | Powder Blue | 65 | 16 | 18 | 34 | 34 | 1.71 | 1.67 | 1.43 | 1.47 | 0.43 | 0.37 | 1.76 |
6Optisolar UD70+16A+6UC | Powder Blue | 65 | 16 | 18 | 34 | 34 | 1.75 | 1.42 | 1.49 | 1.16 | 0.43 | 0.37 | 1.76 |
6Optiselec UT72+12A+6UC | Grey | 71 | 13 | 14 | 28 | 53 | 1.63 | 1.57 | 1.35 | 1.25 | 0.34 | 0.30 | 2.37 |
6Optiselec UT72+16A+6UC | Grey | 71 | 13 | 14 | 28 | 53 | 1.68 | 1.30 | 1.41 | 1.03 | 0.34 | 0.30 | 2.37 |
Note:1.The performance data are calculated by LBNL WINDOW 6.3 according to ASHRAE NFRC-2010 standard condition.
2.The performance data are only for reference. Jinjing will hold the right of final interpretation.
FAQ
We have organized several common questions for our clients,may help you sincerely:
①How about your company?
A world class manufacturer & supplier of Optilite Offline High Performance Bent Temperable Low-E glass,is one of the large-scale professional investment mineral production bases in China. Annually more than 300000 m2. Optilite Offline High Performance Bent Temperable Low-E glass are exported to markets in Asian, American, Middle East, African. OEM service available according to customer’s requirements.
②How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within two month days, We will arrange the factory delivery as soon as possible.
- Q:So it will look like the ferris bueller ferrari. If so how can that be done.
- I once built a Bradley GT kit car, from Calif., over a V.W. Superbettle chassis. It was a lot of work and time spent, but also fun and the result turned a lot of heads when I drove by. So, I would say why not!
- Q:LOW-E Insulating Glass Price (6 + 6A + 6)?
- Upstairs price a bit scary of the CSG hollow is indeed their own production of Yao leather are foreign companies of the process is the same, but their institutions are huge management costs so expensive.
- Q:What brand of hot-melt glass is better?
- Qinhuangdao Yaohua Jun Ding Art Glass is the best, you can go to the local inspection, you can join. Old brand, for decades, I heard that done a lot of large projects, but also to do the export.
- Q:Why is the glass surface of the glass after the glass film?
- On the contrary, not film or paste the poor quality of the membrane temperature is always difficult to come down, because the outside of the heat continue to come in, and the car's air-conditioning constantly out. Posted a good film winter insulation is the principle.
- Q:What is this wall of glass building material called?
- Glass mold wall, in advance to the tempered glass or a special glass in the ground assembled into 4 meters × 4 meters large, and then hoisted to the outer steel keel
- Q:Alright, so I want to build an under seat sub woofer enclosure for my smaller sports coupe. There's not much room at all under the seats, so I was thinking about going with a Pioneer 8" shallow mount sub, but the box is causing me a bit of a headache. I haven't had a chance to take a measuring tape to it, and doing so would be difficult.My idea is to get a can of the spray foam stuff used to seal homes, to inflate a garbage bag under the seat. After letting it sit and dry for a while, I'll remove the seat, pull the bag out with the exact dimensions of my seat and then play from there. I'll take the bag off of the foam and probably sand it down from there to fit my needs. I'll then use fiber glass to build up the box from the foam mold.Any thoughts on better ways to do this?PS: The car is a 2000 Mercury Cougar incase anyone has actual dimensions.
- you can take the seat out and then use a think foil paper and line under the seat then put a thin layer of fiber glass then let it dry and go from there also. * remember when your using the fiberglass your also gonna want to put a layer of bondo to strengthen the box but you do have a good idea also what ever works.
- Q:How long is the test report of the building material? Is there a corresponding national document?
- Valid to see the customer's request. The general validity period is one year. No corresponding national documents are valid for a long period of time. Building materials testing: This book is with the enterprise, based on the work process of curriculum development and design, to professional activities as the guide, to the ability as the goal, the project prepared for the carrier. Through this book study, you can be familiar with the basic properties of commonly used building materials and technical requirements, at the same time with the building materials testing pilot, witness the quality of the sampling staff and job skills. The contents of the book include: the basic knowledge of building materials and testing, sand and stone technical indicators detection, the main technical indicators of cement testing, concrete admixtures and admixture performance testing, ordinary concrete performance testing, building mortar performance testing, block material quality testing, Steel and steel welding pieces of technical performance testing, waterproof material performance testing, architectural glass technical indicators and testing, construction gypsum products technical requirements and testing, architectural coatings performance testing, a total of 12 projects, using the current standards, norms, Contact practical, simple and practical. Each project has a summary and self-test exercises to help students consolidate their learning outcomes. This book is for vocational colleges construction engineering technology, engineering cost, civil engineering testing technology and civil engineering related materials for teaching materials, but also as engineering and technical personnel, building materials testing job skills training materials or reference books.
- Q:Which brand of glass ink is good?
- I think the boss is better, after all, is the old brand, and many people also use this ink, and word of mouth is also good!
- Q:What is the difference between one-way perspective glass and one-way perspective film?
- Hello, you said that the one-way perspective glass is not the original coated glass? Coated glass is sprayed on a layer of ordinary glass, the effect can only block the dazzling light. No other function, and architectural glass membrane can have a Hot / cold, isolated UV, explosion-proof, bulletproof and other functions, the price may be no new products can replace the glass because of the sake of it? Single perspective function is to rely on light adjustment to achieve the external light from the outside to see the Mirror effect. If the indoor light strong effect on the contrary. On the glass function film in detail some of the introduction, you can come to our space to understand what ~
- Q:Building decoration commonly used varieties of light and heat glass
- Many types of glass, according to the chemical composition can be divided into soda-lime glass, aluminum-magnesium glass, potassium glass, borosilicate glass, lead glass and quartz glass.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Optilite/Optisolar/Optiselec A series Ultra-clear Glass
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 watt
- Supply Capability:
- 500000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products