Optic Fiber Cable
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 500M Per Day m
- Supply Capability:
- 5000M Per week m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging of Control Optic Fiber Cable
Packaging Detail: | 25kg/bag,kraft paper bags with plastic bags inside |
Delivery Detail: | 15 days |
Specifications of Optic Fiber Cable
1,for wire or cable sheath
2,quality SGS and ISO9001
3,delievery time 7 days
4,the highest temperature is 70
this product is used for wire or cable sheath.
Delivery of Optic Fiber Cable
PROPERTY | UNIT | SPECIFICATION | TEST | |
HR-70 | JR-70 | |||
tensile strength | Mpa | MORE THAN16.3 | ≥16.8 | GB1040 |
Elongation at break | % | 320 | 310 | GB1040 |
Thermal agining 100°C 168h | -- | -- | -- | -- |
tensile strength at aging | Mpa | 15.4 | 16 | GB1040 |
Maximum change rate of Tensile Strength | % | -7.1 | -4.8 | -- |
Elongation ate Break after aging | % | 300 | 290 | GB1040 |
Maximum change rate of Elongation at break | % | -11.8 | -6.5 | -- |
Weight Loss after Thermal aging | g/cm3 | 9.6 | 11.2 | -- |
Thermal deformation | % | 45 | 35 | -- |
Brittle point of Low temperature impact | °C | (-)40pass | (-)40pass | GB5470 |
Thermal stable time at 20°C | min | 100 | 95 | -- |
Volume resistivity at 20°C | Ω.m | 5.6*1010 | 2.2*1013 | GB1410 |
Volume resistivity at working time of 20°C | Ω.m | -- | 3.5*109 | GB1410 |
Dielectronic strength | mv/m | 28 | 27 | GB1408 |
- Q:Wire and cable CCC product consistency is what
- What brand of wire pipe PVC pipe used? Is not in the financial or plastic surgery better ah? Guiqiu we recommend, thank you! What brand of network cable used a good, need double shielded cable, thank you
- Q:IPhone mobile phone data cable can not charge the power, the above shows the cable or accessories not certified can not work with the iPhone,
- Not allowed to slot the proposal with PVC gusset which is only 1 cm thick only open protective layer on it! The water pipe is not enough unless you have a thickened wall outside the decoration.
- Q:Why this cable has not yet been certified
- Electromechanical products are usually used to be assembled into parts, multiple parts and then assembled into a single product, the number of products or the number of pieces measured
- Q:IPadmini. The latest version 7.1.1 up in the morning to see the non-stop display this cable is not certified does not support this feature. The The Charger original. Not on the computer charge. The Ask God to answer more
- The problem lies in the charger between the machine, IPAD charging is to a charging protocol to complete, when the IPAD did not receive the agreement signal will be prompted: do not support this accessory, Apple's products have charging protocol, charging Is through the data line in the two lines and IPAD transmission charging protocol signal when ipad received the charging protocol signal after the machine internal charging circuit began to open the internal charging circuit to charge, the problem is to accept the charge signal is not so prompted not to Support, change the line to try
- Q:Apple mobile phone does not support this charge when charging this thing how to charge
- I use the TV as a computer screen, connect the HD line, how no sound
- Q:What is the difference between "wire" and "cable"?
- Simple point, the plotter is generally used to out of the line map, the general is the Academy of Engineering, the Bureau of the use of a CAD map, and some can also be some effect of the general effect of the map, generally suitable for color requirements are not very high, but right Print accuracy requires a high place. Inkjet machine can be divided into indoor and outdoor ink, outdoor irritating smell, for outdoor advertising like the effect of the map, the indoor no irritating smell, the general subway, as well as other indoor advertising are used this out of
- Q:Ipad not charge how the matter. Said the cable or accessories have not been certified, and may not be able to cooperate with this ipad reliable work....
- According to the "Power Engineering Cable Design Code" GB-. 5.3.3 only asked for the depth of the cable buried directly: drop the blue skin to the ground depth, not less than 0.7 meters; when located in the roadway or farmland Under the appropriate should be deepened, and should not be less than 1.0 meters. 5.4.3 protected pipe buried in the ground, should meet the requirements under the depth of the pressure and environmental corrosion resistance. Through the uneven settlement of the backfill section and other places to increase the force, it is appropriate to use steel. Another direct burial should be selected armor type.
- Q:Remove the computer and wash it off. What the motherboard did not move it, that is, the dust of those dust sasses, as well as the other wire of the skin what Sassafras wash, but the computer re-connected to the Internet when the old mistakes . and the lower right corner of the red Fork appears, disappeared after the emergence. The The Said the network cable is not plugged in, but the MODERN that POWER, LINK, LINE, 3 lights are normal display. The The This is how the matter, and just also appeared keyboard and mouse just start the machine can also be used normally, but in a moment to fall, and then plug their plug re-plug the mouse lights can be displayed, but the lights on the keyboard simply do not Bright, restart the computer but good, what is going on? bother. The The I hope the master quickly to help me, and this machine is relatively old ah No problem added: on a machine, just tried to re-create a connection in the network neighborhood, useless more
- Galvanized itself on the anti-corrosion, no need to do anti-corrosion treatment.
- Q:What are the T and T, s of the wire and cable test type?
- May be charging head of the problem, the line may also be a problem. If the warranty can be free for the change.
- Q:Apple 6 Charging Why always show this cable has not yet been certified
- Set-top box with the AV cable connection: yellow - video, red and white - audio, corresponding to the TV's AV input interface can be connected (do not receive the TV component interface). As for the emergence of partial pink, the possible reasons are: . poor contact. You will re-connect the three-color AV cable to the set-top box, on the TV, to ensure good contact. . cable quality. Three-color AV cable may not be the quality, if you can replace a group of try, or use the DVD and other equipment connected with the TV to test the AV line with or without problems. . TV AV input failure. You can use other video source equipment connected to the TV test, such as: DVD, VCD machines and so on. . set-top box failure. May be set-top box AV output port problems, if there are multiple sets of AV output, you can try other port okay, not the case may be the quality of set-top box, call customer service it.
1. Manufacturer Overview |
|
---|---|
Location | Shanghai, China |
Year Established | 1998 |
Annual Output Value | USD300,752,660.00 |
Main Markets | Southeast Asia;Mid East;Domestic Market |
Company Certifications | ISO9001:2000 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 70% - 80% |
No.of Employees in Trade Department | 21-50 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | Above 160,000 square meters |
No. of Production Lines | Above 20 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | High; Average |
Send your message to us
Optic Fiber Cable
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 500M Per Day m
- Supply Capability:
- 5000M Per week m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords