Oil pump / vane pump / rotary vane pump/ pumpa de aceite

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
10 set
Supply Capability:
100 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Packaging & Delivery

Packaging Detail:Oil pump / vane pump / rotary vane pump package: Wooden case / carton
Delivery Detail:7-15 Working days

Specifications

*Oil pump / vane pump / rotary vane pump 
*It has its obvious advantage in the transmission of high flow at low revolution

Oil pump / vane pump / rotary vane pump

Oil pump main features

YB oil pump is with by-pass valve built-in. The oil pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the oil pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps. The oil pump has its obvious advantage in the transmission of high flow at low revolution.

Flow Rate of our vane pump

ModelSize/Flow Rate/Speed650 RPM600RPM550 RPM500 RPM450RPM400 RPM
G/minL/minG/minL/minG/minL/minG/minL/minG/minL/minG/minL/min
YB-5050mm/2''803007227064240562104818040150
YB-6565mm/2.5''1325001234651144301033909335082310
YB-8080mm/3''2651000243920222840200760180680160600
YB-100100mm/4''





5051900

4051530

 

 

 

 

Rotary vane pump performance data

ModelYB-50YB-65YB-80YB-100
Rated Speed640RPM640RPM640RPM640RPM
PowerHP3.05.01025
KW2.247.518.5

Application of oil pump

Oil tank truck
Fleet refueling.
Lube oil
Aviation refuelers
Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.

 

Installation for vane pump  

With cardan shaft or hydraulic motor, the vane pump can be installed on oil tank trucks. And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Equipped with Teflon seals, the vane pump can also transfer a wide variety of solvent in the petrochemical industry.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Audi a6l2.0 engine oil pump timing, right?
This newspaper, engine type, check the information I gave you
Q:What are the markings on the fuel pump and the oil pump? They can be recognized at once
It looks different
Q:How does the motor pump exhaust the air?
The oil pump doesn't exhaust the air
Q:How do you install the pedal motor pump?
Put the unit on the foundation with anchor bolts, between the base and the base, and use a pair of wedge pads.Release the axle shaft and place on the pump shaft and base with a level gauge. Adjust the level of the machine by adjusting the wedge pad and tighten the anchor bolts properly so as not to move around.Correct the concentricity of the pump shaft and the motor shaft, and allow the deviation of 0.1 mm on the outer circle of the axle shaft; two the clearance of the coupling plane shall be guaranteed 2~4 mm, and the clearance shall be uniform, and the tolerance shall be 0.3 millimeters.After connecting the pipeline and determining the direction of the motor rotation, then coupled with the coupling, and then check the concentricity of the shaft.In the actual test run 2~3 hours after the unit, for final inspection, if there is no adverse phenomenon, that the installation of qualified. Check the temperature and vibration of the bearing during the test run.During installation, all holes in the unit shall be covered to prevent debris from falling into the machine.In order to prevent the sundries from entering the pump, the filter shall be installed on the newly installed pipeline. The effective cross section shall be 2-3 times larger than the cross section of the suction pipe.However, the oil pump rarely fails, generally as long as the opening of the cylinder head, see more fresh oil or start the engine, there is oil jet, indicating the normal operation of the oil pump.
Q:How to identify the motorcycle engine oil pump is normal?
Start the engine first and see if there's any white smoke
Q:Automobile engine oil pump does not leak pressure, which causes oil seal ring to leak seriously. What is the trouble?
Automobile engine oil pump with crank, when the engine speed of pump oil is high, therefore need a pressure relief valve to keep the oil pressure of the main oil channel, the excess oil drain back to the oil pan, if the oil pump pressure relief valve failure, no pressure relief will lead to the oil pressure is too high, will be oil lattice sealing collopse. If the pressure relief valve normally open, it will cause oil pressure is too low, will burn bearings and the like.
Q:474 new engine replacement and pump axle
That's the rough line. You need to grind the shaft
Q:What about the balance shaft of the automobile engine oil pump? How much does it cost to fix?
Hello, in this case, I suggest you indicate the type of car configuration, the price of different cars must be different.
Q:How does the c4l determine whether the oil pump works? The oil lamp is on
Check that the oil is adequate, enough, that is, the oil pump to be replaced
Q:Automobile oil pump fault
Such a problem can arise. The oil pressure is too high, and the oil filter is opened by "drum". The reason is that the oil pump pressure limiting valve [pressure relief valve], resulting in a failure, can not normally open at high pressure caused by pressure relief

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range