Q:Does the cushion cushion affect the vehicle?

Rubber gasket itself is to prevent the shock and body contact things, the shock absorber of some of the benefits of the market on the rubber, hard rubber and metal threeShock absorber -- this kind of thing is called a shock absorber apron

Q:Please help to understand what parts of the car are used rubber parts, must be more specific Oh!

There are many pieces of rubberThe place where the car fits, similar to the combination bolt,,There are contact places, similar to the floor, shock absorption faster..And where the shock is, the water tank bolts...If you want to further know the words, you can look at the car video, at a glance.

Q:How does the ceiling fabric come off?

The main chain of polyurethane is very flexible, and its biggest characteristic is to withstand shock, vibration and bending fatigue. Its peeling strength is very high, especially its low temperature resistance is excellent, and it is the champion in the existing glue. Polyurethane glue is easy to process, can be cured at room temperature and heating, and has little influence on the thermal stress of different materials. It has been widely used in various fields. Polyurethane glue has poor water resistance and heat resistance, so it is necessary to pay attention to it when selecting.

Q:Excuse me, is there a ground adhesive tape at the end of the tank truck? What's the use of it?

In order to eliminate the static electricity produced in the process of refueling, discharging and transporting oil, to prevent fire caused by static electricity, and to ensure safe production, all kinds of electrostatic elimination devices are installed in the tank truck.

Q:The car's tires are made of rubber. Is that right?

In addition to hydrocarbons, you may also hear that sulfur is contained in the tires. In fact, the remnant of the vulcanization of the rubber at this time. After polymerization, the main polymer is a linear polymer long chain. Such rubber usually poor performance, not easy to shape, become soft heat, cold harden, brittle, easy to wear and aging. Vulcanization is a process for improving the properties of rubber. Vulcanization process of rubber

Q:What are the uses of oil seals in automobiles? Where do you need to use the oil seal?

All the running tanks contain liquid lubricant and the parts which are connected with the outside need oil seal. Some are rubber, some are metal, most are steel reinforced rubber, such as crankshaft rear oil seal, transmission front and rear oil seal, left and right axle oil seal, front reducer front oil seal, air compressor crankshaft oil seal and so on

Q:What are the patterns of electric tyres?

Tire noise generated by two, when the first contact with the ground tire tread groove, will change the air flow generated by the noise and the rubber block and the ground on the noise, are collectively referred to as the pattern noise. The second is the noise caused by the carcass structure and the rubber formula, which is called structural noise.The greater the area of the rubber block, the greater the noise, the better the grip; the smaller the rubber block, the lower the noise, but the worse the grip, the middle of which need to seek a balance point. Tread design is a process of balancing between the grip, the mute, and the drainage, and the process of seeking a breakthrough.

Q:How do I remove the glue from my car floor mats?

Latex mat, if not transparent latex pads, you can accept the sun bathed in the sun, generally 2 days or so, odor will be removed. It should be noted that the transparent latex mat can not be exposed Oh, transparent latex mat can only be placed in a cool ventilated place, airing for about 3 days, the basic elimination of odor.

Q:Why should polyurethane sealant be used in automobile manufacture?

This is directly related to the polyurethane material, strong adhesion, good oil resistance, good toughness, fast curing time, so the use of Shi PU polyurethane sealant in the manufacture of automobiles.

Q:What does "four items" mean?

Corrosion is mainly caused by the combined action of moisture, oxygen and corrosive substances in the air. Therefore, for a long time to stop the car, should maintain a clean metal surface. The garage in the parking lot should be kept ventilated, keeping the air relative humidity below 70%. The dust, dirt and moisture on the car should be removed in time. Grease the grease or grease the grease on the surface of the rusted part and the surface of the machine. The pores in each assembly shall be sealed to prevent air, moisture and dust from entering the interior.