NUT COKE of Low Phosphorus

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

We export many kinds of coke, such as CSR64% and CSR 62% metallurgical coke (met coke), the NUT coke of Low Phosphorus,coke breeze of 3 to 6 mm, and so on.

We can offer below grade theNUT coke of Low Phosphorus, origin from China.

ITEM                                          GUARANTEED           REJECTION

MOISTURE (as received)              8%MAX            DEDUCTION FROM B/L WEIGHT.

ASH (dry basis)                            13.5%MAX                     ABOVE14%

VOLATILEMATTER (dry basis) 1.5%MAX                       ABOVE1.9%

FIXED CARBON (dry basis)   85%MIN            BELOW 83%

SULPHUR (dry basis)                   1.0%MAX                       ABOVE1.3%  

PHOSPHORUS              0.018%MAX

SIZE: 20-50MM              90%MIN

(-) 20MM                                       5%MAX                           ABOVE10%

(+) 50MM                                      5%MAX                           ABOVE10%

Atpresent, the main customers are NOBLE GROUP, IMR and so on. Our main overseasmarkets are Japan, India, Brazil, Iran, Vietnam, and so on.

Let me know your demands then I can check availability.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the main purpose of the use of coke
Coke is mainly used in blast furnace ironmaking and smelting of non-ferrous metals such as copper, lead, zinc, titanium, antimony, mercury and so on. In the process of blast furnace smelting, there are four kinds of functions, such as heat supply, reduction, material skeleton and carbon supply.
Q:What is the difference between coke and coking coal
Coke: a solid fuel, hard, porous, high calorific value coal. High temperature carbonization made for ironmakingTypes of coke:Coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.
Q:The chemical composition of coke is m10.m25
Abrasion resistance refers to the ability of coke coke can resist friction without generating surface of glass forming debris or powder, by the M10 value. The effect of the crack of coke crushing strength, M40 value, the influence of coke pore structure of abrasion strength M10 value determination method of.M40 and M10 was more in China the migon drum test in Germany. As shown in table 31-1.After the completion of the test, the sieve with the pore diameter of 40mm and 10mm screening, greater than the percentage of 40mm particle size is M40, less than 10mm of the particle size of the M10 value. The intensity of the provisions of China Metallurgical Coke indicators are shown in table 31-2.
Q:What is the reasonable ratio of coal to coke
There are lignite, bituminous coal, anthracite, semi anthracite these categories. Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage.
Q:What chemical plant used to coke
Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage
Q:What are the main uses of coke
The utility model is used for casting blast furnace smelting of non-ferrous metals such as copper, lead, zinc, titanium, antimony, mercury, etc..
Q:The difference between coal and coke
Today, the Customs Tariff Commission of the State Council issued the notice on the implementation of the tariff plan in 2013. Shang magnesium network noticed,. This important change, apparently stems from the WTO requires China to cancel the export of raw materials restriction policy decisions. In recent years, due to higher export tariffs, coke exports almost stagnant, but also indirectly affect the production of magnesium metal. Due to insufficient supply of coke oven gas, and the price increases, the production of primary magnesium in the main producing area of Shanxi magnesium metal has been seriously reduced. Shang magnesium network analysis, the abolition of coke and semi coke export tariffs next year, the amount of exports should be theoretically faster recovery, some of the original magnesium production capacity will be restored. However, the government may take other measures to limit coke and semi coke production, coupled with the western economic downturn, exports may be rapid growth. Therefore, the coke industry after the abolition of export tariffs on the market situation remains to be seen, the impact on the magnesium industry has yet to be further assessed.
Q:Standard grade two grade coke standard
5, the moisture in the coke: water fluctuations will make the measurement of coke is not allowed, resulting in fluctuations in furnace conditions. In addition, the increase in the moisture content of Coke will make the M04 high, M10 is low, the drum index error.6, the screening of coke composition: in the blast furnace coke particle size is also very important. In the past, the particle size of coke in our country is as follows: the coke size of large coke oven (1300 - 2000 square meters) is greater than 40 mm; the coke size of medium and small blast furnace is larger than 25 mm. However, some of the steel test shows that the coke particle size of 40 - 25 mm as well. Larger than 80 mm of coke to be whole, so that the particle size range. The coke block is uniform, the gap is large, the resistance is small, and the furnace condition runs well.
Q:Effect of coke powder ratio on the index
Quality index of cokeHigh temperature carbonization coke is the solid product, its main ingredient is carbon, the pore structure of spores (or pore porous) with crack and irregular crack. Have a direct impact on how much strength and crushing strength of coke, the index of crack usually (crack length per unit volume of coke in the index) to measure indicator. Pore structure is mainly used for measuring the porosity of spores (pore volume percentage of the total volume of coke) said that it affects the reactivity and strength of coke. The coke used for different purposes, the porosity index requirements change, but it usually requires 40 to 45% metallurgical coke porosity, casting requirements of 35 to 40%, the export of coke need to crack about 30%. coke with high and low levels of porosity, the use of coking coal has a direct relationship, such as gas refining is mainly coke, crack, high porosity, low strength; as in coking coal Break the coke refining base of small, low porosity and high strength. The strength of coke is usually the crushing strength and abrasion resistance of two indexes to represent the strength of coke can be broken. No cracks or defects and M40 values along the fault reference external shock resistance structure; wear strength of coke coke refers to the ability to form glass the surface resistance to foreign friction and no fragments or powder, expressed as the value of M10. The degree of M40 crack coke compressive strength affect the value, value of pore structure of coke impact wear resistance of M10 spores. The determination of M40 M10 and a lot of value, many German migon drum test our method.
Q:The pulverized coal is separated from the air to enhance the heat, in addition to the main coke
Ethylene containing carbon carbon double bond can add poly to generate polyvinyl chloride, can be used for food packaging, reaction equation is: nCH2=CH2Initiator,The answer is: nCH2=CH2Initiator;

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range