NUT COKE of 20 to 50mm
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Our company began to export coke whenChina cancelled 40% of coke export tariffs and quotas on January 1, 2013.
ITEM GUARANTEED REJECTION
MOISTURE (as received) 8%MAX DEDUCTION FROM B/L WEIGHT.
ASH (dry basis) 13.5%MAX ABOVE14%
VOLATILEMATTER (dry basis) 1.5%MAX ABOVE1.9%
FIXED CARBON (dry basis) 85%MIN BELOW 83%
SULPHUR (dry basis) 1.0%MAX ABOVE1.3%
SIZE: 20-50MM 90%MIN
(-) 20MM 5%MAX ABOVE10%
(+) 50MM 5%MAX ABOVE10%
Atpresent, the main customers are NOBLE GROUP, IMR and so on. Our main overseasmarkets are Japan, India, Brazil, Iran, Vietnam, and so on.
Let me know your demands then I can check availability.
- Q:How to remove the bottom of coke steel
- Two, with cooking shovel (Mason's Pihui knife is best) to remove surface soft.Three, the same with a spade close to the bottom of the pot to eradicate. Until the last thing left is black.Four, wash the metal wire ball friction force discoloration, and always use water to clean out the dirt.
- Q:Coke is how to produce, what is its purpose?
- Coke is a color of deep gray to black solid, soft; internal structure of porous, and sometimes can be six square column.
- Q:What is the difference between metallurgical coke and chemical coke
- Metallurgical coke, bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization).
- Q:Do not understand why some of the indicators of coke is the cause of the full analysis of phosphorus or foundry use of this time?It is best to use the foundry requirements? Thank you
- Phosphorus increased the brittleness of cast iron, the use of metal damage. Therefore, the requirements of the foundry phosphorus is the lower the better. Because of the large cupola furnace in the furnace is acidic, can not effectively dephosphorization, so the foundry coke in the phosphorus requirements as low as possible, and require the supplier to provide a quality guarantee form.
- Q:How much coke is needed for a ton of iron
- Blast furnace production is continuous. A generation of blast furnace (from start-up to overhaul shutdown of generation) to continuous production of more than ten years. The production, from the top (usually roof is composed by Bell and hopper of modern blast furnace is the valve bell and bell less top) constant load of iron ore, coke, flux, from the lower part of blast furnace tuyere blowing hot air (1000 to 1300 degrees Celsius), sprayed into the oil, coal or natural gas. Fuel
- Q:What are the indicators of first grade coke and the two grade coke?
- The mechanical strength of the mechanical strength of ash sulfur%% volatile(crush strength M40) (abrasion strength M10)
- Q:What are the requirements for the quality of coke in blast furnace smelting
- Coke is a solid product of high temperature carbonization, the main component is carbon, is a crack and irregular pore structure (or porous). The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke). The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke.
- Q:Used in a restaurant?Dry or dry carbon carbon, coke or coke, and I do not know which word is a word of this sound. The use of coke for iron making. They are more than 1000 yuan price.The main problem is: dry carbon is coke?Toxic smoke, then the chimney can not do? Can I use the blower?
- Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke.
- Q:Effect of coal fineness on coke
- The fineness of pulverized coal, which is less than 3mm of grain size, has a great influence on the quality of coke. The fineness of coal is one of the indexes of coal blending quality. In the production, when determining the fineness of coal, we should consider two aspects of the quality uniformity and production operation.
- Q:The coke is divided into several separate uses
- Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. The metallurgical coke quality standard (GB/T1996-94) developed in China is the quality standard of blast furnace.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
NUT COKE of 20 to 50mm
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products