Replacement for the traditional G4 lamp, like in the car, downlight, hotel, restaurant, museum, showroom, meeting room, shop window and telephone cabinet etc.
Do not touch the bulb when lighting on.
Not suitable for dimmer.
We support OEM/ODM
We can manufacure led lighting products by your technical data/picture/draft
Packing and delivery
Standard packing inside, cartons outside
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
30-40 business days
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:What does patch LED light mean?
- Look, what's your product?. Some products have volume requirements, straight line will be relatively large, patches of small affixed to the circuit board does not occupy space, if only the light source, it may be an ordinary light bulb, as LED power saving.
- Q:How many volts is a single LED on the LED patch band?
- The single LED on the LED patch band is around 3.3V.LED light emitting diode, which is a nonlinear component, its operating voltage (tube pressure drop) is also different: ordinary red LED about 1.5 V; ordinary green LED about 1.8 V; bright white LED up to 3.3 V or so.
- Q:What determines the brightness of the patch LED?
- The current through the lamp itself. If the same lamp, so it is necessary to ensure consistency in the different current circuit, the test voltage of little significance, especially in the case of parallel lamp, current a few beads each share is not the same, some big, some small.
- Q:LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- L electrode for eutectic solder reflow, the other can be used, regardless of the kind of welding, the temperature is not lower than 100 degrees, the flammable soluble materials have strict requirements, depending on whether the welding temperature is lower than the melting point of what you said or. Otherwise, there will be deformation or damage to the material in the reflow process.
- Q:LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?
- Packaging is for TOP series LED, that is, the type of plastic molding. The patch is based on the PCB circuit board for molding. Mold release agent is used in molding.
- Q:What are the storage requirements of SMT patch LED (LED)?
- Moisture-proof packing- anti SMD LED in the transport and storage of moisture absorption, SMD LED shall be placed in sealed moisture-proof bag, inside put damp proof agent for protection, and placed the humidity humidity SMD display card packaging bag.
- Q:Notes on patch LED
- Storage bags are sealed and stored at a temperature of <40 DEG C.
- Q:What does "1210" mean in patch LED?
- 1210 refers to the lamp specifications.LED common lamp specifications and parameters of patch0603, 0805, 1210, 3528, 5050 refers to the LED lamp belt, often used in light-emitting components ----LED size (English / Metric) name, for example, 0603 refers to the length of 0.06 inches, width of 0.03 inches. But note that the 3528 and 5050 units are metric
- Q:Welding method and notice of SMT LED
- I recommend reflow soldering under normal conditions and manual welding only when repaired. 2 manual soldering electric soldering iron maximum power can not exceed 30W, welding temperature is controlled within 300 degrees, welding time less than 3 seconds. 3 do not touch the colloidal iron welding head. 4 when the pin is heated to 85 degrees centigrade or higher than this temperature, it can not be pressed. Otherwise, the welding will be broken.
- Q:What is the difference in performance between the LED plug-in and the LED patch?
- 1, the patch is relatively easy to heat dissipation, can be directly welded on the aluminum substrate, heat faster.2, in general, there is a straw type shell, general lighting has front facing directivity, just look at it, brightness will be the biggest. The patch has a relatively wide divergence angle and is more suitable for fluorescent lamps.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range