pvc panel ceiling wall
2.Soncap Certificate, ISO9001:2008
3.European Standard EN13245-2:2005
Introduction of PVC panel, PVC ceiling panel and PVC wall panel
Description of product
Product name : PVC panel , PVC ceiling , PVC ceiling panel , PVC wall panel , PVC decorative panel , PVC decorative sheet , PVC board .
Raw materials : PVC resin and calcium carbonate .
Product origin : Zhejiang , China .
Brand name : OEM
Surface treatment : Normal printing , thermal transfer printing (hot foil printed), peritoneal(laminated) , high glossy , Pearl
PVC content : 40% , 45% , 50% ,60% etc .
Shape : Flat , groove panel
Color design : Marble , wooden , and other more than 2000 article designs .
Main Product Features:
Fireproof : Self-fire extinguishing, non-flammable , fire and inflaming retardant.
Waterproof (dampproof): Resistance to weather/ special chemicals; Waterproof / Washable.
Rustproof (resist erosion) : It is impenetrable by insects or termites, and won' t rot or rust.
Heatproof : Good high temperature impact performance .
High intensity : The excellent rigid and superior impacted surface is without any peeling.
Anti aging : Good aging resistance , durable in all mechanical characteristics .
Quality : Hard quality, high intensity and sheen , fadeless , environmental friendly .
Design : The variety of colors and patterns .Natural wood (marble) grain: showing authentic wood
(marble) structure and artistic sense.
Other : Easy to be cut, drilled, nailed, sawed, and riveted. DIY is all right ;
Quick maintenance and no need of painting ;
Good resistance fixations .
- Q:How much should it cost to have a contractor run a 1 PVC gas line from the meter, up 12 feet, and 120 ft
- PVC is not allowed by code for a gas line. It is too easy to break, from an earthquake or other physical abuse. You need to use black iron pipe or the newer flexible pipe systems that have become available. The cost depends upon local labor conditions and how difficult the attic access may be, but a ballpark price might be $1000.
- Q:PVC floor maintenance cycle is generally how long?
- Regular cleaning and maintenance
(1) dust or vacuum cleaner.
(2) floor cleaning polishing agent diluted 1:20 watered, mop or with high-speed polishing machine plus red grinding for grinding.
(3) on the 1-2 layer of high strength wax.
(4) If necessary, can be combined with high-speed polishing machine plus white polishing pad polishing.
- Q:PVC floor cleaning what to pay attention to, choose a professional team have it?
- This is not necessary But usually do need some maintenance.
1) daily maintenance: the use of clean wet mop clean the ground, the serious pollution to the local clean;
2) month maintenance: the whole site to clean the dust after the depth of waxing treatment better conservation;
3) pollution treatment: PVC plastic sports floor stains on the ink, food, greasy and other stains, to immediately carefully wipe the stains, and then use a diluted detergent scrub traces of residual black leather shoes can be difficult to remove the use of Hao Kang Special cleaning agent veil wet or rinse with rosin water, not the detergent or rosin on the floor clean, scrub to make wax conservation;
4) chemical protection: to avoid a lot of water for a long time to stay on the floor surface, the water for a long time soaking the floor, may be deep under the floor to make the floor glue to melt the loss of adhesion, may also make the floor surface protection wax water layer caused by floor Pollution, may also contaminate into the floor caused by floor discoloration;
5) Daylight protection: to avoid direct light exposure, to prevent ultraviolet radiation, causing discoloration, fading.
1) is strictly prohibited to wear shoes, high heels or easy to play the color of the shoes;
2) cutting is strictly prohibited, the surface should not be rubbed with a hard object, so as not to damage or rupture;
3) is strictly prohibited in the floor using acid, alkali and other corrosive chemicals and away from fire, high temperature to avoid deformation of the floor;
4) When carrying goods is prohibited in the ground drag, so as not to scratch the floor.
- Q:PVC board inkjet and PVC board photo which effect is good
- Direct spray on the pvc board is used uv flat panel printing process,
Pvc board photo you should refer to the adhesive or car stickers directly mounted on the pvc board.
The difference between the two processes is very large, the price gap is also great
Uv flat printing is in the pvc direct injection, because uv is the original imported ink to play, waterproof, sunscreen, color lasting .. and a sense of bumps .. good texture
Photo is mounted up, not lasting, especially domestic use are on behalf of the ink
- Q:what are the two white PVC pipes coming out of the attic a/c?
- I believe the pipes are air exhaust pipes for your bathroom. I think it has something to do with stuff going down the drain better because there is no vacuum. To get the water out you have to let the air in. Any how, if you do have a leak there it is probable the roof is not sealed around that pipe well. I don't think the waste water would ever back up that high. Unless it was a Steve Martin movie!
- Q:What is the difference between KT board and PVC foam board?
- In general, such a big board when the board is KT board, KT board is very light, but also cheap, generally 1 meter 2 two meters 4 specifications, 5mm thickness, soft, utility knife can easily cut , Easy to cut, stitching, this figure in the board should be KT board.
PVC foam board is a hard material, relatively thick, with a variety of thickness, 1 cm thick and also 4,5 mm thick, it is in advertising, mainly for carving, such as the company on the back of the wall Sign ah, the word ah what, usually for the beautiful above will add a layer of acrylic, there are all with acrylic, but the acrylic is more expensive, so the request is not too high, then use PVC instead, the above can also be mounted on the screen.
- Q:MD board and pvc board which do better TV wall
- Pvc board compared to the MDF, more suitable for use as a TV wall material.
PVC foam board with anti-corrosion, moisture, mildew, non-absorbent, easy to thermoforming and other characteristics, it is widely used in furniture, cabinets, bathroom cabinets, exhibition racks, box core, indoor and outdoor decoration, building materials, chemicals Field with board.
MDF, also known as fibreboard, is made of wood fiber or other plant fiber as raw material, urea-formaldehyde resin or other suitable adhesive made of man-made sheet. Density board due to the soft impact resistance, but also easy to reprocess, in foreign countries is a good material for the production of furniture, but because the country on the high density board standards than the international standard several times lower, so the use of MDF quality Still need to be improved. Density board is the biggest drawback is not moisture, see the water on the swell. In the use of MDF do skirting board, door panels, windowsill board should pay attention to six sides are painted, so that will not be deformed.
- Q:Pvc buckle board ye demolition?
- Oh, I'll answer you! I am a decoration worker! Gossip less, first of all you look at your home PVC top of the buckle which one of the last piece of the width of the small, because the installation of the last piece of time, not necessarily the whole block! For example, the East is small, so that we have to start from the beginning to start! Find a blade inserted from the buckle slit, push to the corner of the corner, (if loose, then hand can also) you will see the last piece of a buckle only two sides of the corners attached! And then to the left or right to push, then congratulations you can get off the buckle! The last piece of demolition, how to split behind, is the individual will be! I do not have to install! How to install how to install!
- Q:Chevrolet board and wood-plastic plate difference
- Chevrolet board, also known as PVC foam board, the main material for the PVC, PVC is made through the extrusion after extrusion molding equipment. In order to increase its performance often add antioxidants, flame retardants and so on.
PVC wood-plastic plate, the main material for the PVC and wood flour, and PVC foam board production process is basically the same, but in the production process to control the degree of foam, and fully mixed with wood flour. In order to increase its performance, also need to add antioxidants, flame retardants and so on.
The difference between the two, mainly reflected in the production of different raw materials.
Chevron board is also known as PVC foam board (PVCexpansionsheet) and Andy board. To polyvinyl chloride as the main raw material, adding foaming agent, flame retardant, anti-aging agent, the use of special equipment extrusion molding. Common colors are white and black. Chevrolet board can be comparable with the wood, and can be sawing, planing, can be nailed, sticky, but also has no deformation without cracking without painting (a variety of colors) and other special features; and low foam sheet can be welded, Ink printing and can also be used saw, drill, milling and other methods for machining.
- Q:How to pack the decoration pipe
- Home pipes are generally in the bathroom and kitchen,
The kitchen of the pipe is made of woodworking board,
Bathroom pipes need to consider the waterproof, you can use PVC board, aluminum plate can also be used, but it is thin, not strong, pay attention to the clear port position to stay out to prevent one day use.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range