Q:Whether there is a national standard or standard for the charging of forklift truck in the factory

The battery charging or storage site should be kept well ventilated, with ventilation and ventilation facilities to prevent the explosion of combustible gas. Smoking in the charging room of the forklift truck is prohibited from smoking. No phone calls in the rechargeroom, such as phone calls to the charging room. 3, as the electrolyte in the battery is a mixture of sulfuric acid and aqueous solution, toxic and corrosive, so when to battery charging and near its must wear overalls and protective glasses. If your skin or eyes are stained with electrolyte, rinse immediately with water and if you have an electrolyte in your eyes, turn to your doctor immediately

Q:The repair process of forklift inspection

Maintenance needs to be performed as required, such as cleaning forklifts, repairing or replacing old or damaged parts. The clean frequencies of forklifts are determined by the use of forklifts. If the forklifts are exposed to harsh substances such as brine, chemical fertilizers, chemicals and cement, they must be cleaned thoroughly after each use. Use high-pressure air, cold water and cleaner when cleaning. You can use a wet cloth to clean the body. Don't direct the faucet directly to the forklift truck, and you may not use a gasoline product or solution for cleaning, as these substances may damage electronic parts or plastic parts. Before replacing the light bulb, check if the fuse is intact and should be sure that the bulb is the same size as the damaged bulb. In the process of replacement, follow the instructions in the instruction manual.

Q:Does anyone know what is the principle of explosion protection forklift truck?

Watson explosion-proof forklift truck quality is not bad, it is also one of the domestic rare good explosion forklift truck manufacturer Passed the national explosion-proof test, explosion-proof principle of specific can consult on Watson website, there will be a professional solution for you. The hope can help you..

Q:The forklift is limited in the factory area

There's no specific speed limit for the forklift truck, 5KM? If say, the goods of factory assembly line is very big, can you be busy? Actually because of its different purposes and ordinary vehicles, forklift again because of its structure characteristic determines not speeding, so at the time of design is not designed to be fast, general fuel forklift with the highest speed, is about 22 km, the battery is 13 km or so commonly, whether in the warehouse or factory, or the ramp, the key is to see the driver's operation, if is is to limit the speed, fuel car can speed limits on the accelerator, the battery can adjust the height of the accelerator pedal, to limit, if you want to completely, seek after-sales personnel, the parameter adjust the speed of the electric control device.

Q:The photo of the forklift card is a few inches. Is it colorful?

I am engaged in this aspect, two inches, normal document photo, blue bottom

Q:What is the difference between a forklift and a trailer for a hydraulic drive?

Hydraulic forklift forklift and shift difference mainly include: the former relies on the hydraulic torque converter transfer engine power to the front axle achieve walking, which depend on the variable speed drive gear in the transfer engine power to the front axle achieve walking; The former is moving forward, in the car and backward by changing the direction of the oil, and the latter depends on the gear drive machinery to move forward, in the car and backward. Forklift trucks are widely used in ports, railway stations, airports, depot, workshop, warehouse, distribution center and distribution center, etc., in the cabin, car, and the container pallets of goods loading and unloading, handling, is essential to tray transportation, container transportation and equipment. With the mechanization of mechanization, the material handling of most enterprises has been removed from the original human transport and replaced with the mechanized handling of forklifts.

Q:Where are the advantages and disadvantages of a battery lifter and a diesel forklift

Working parts of 3. The work part is the direct work of the forklift truck for loading and unloading, which is grouped by the following sections: (1) the tools of withdrawal. It is a variety of work items which are represented by the cargo fork, which is used to fork, pick and shovel the goods. (2) lifting shelves. To install the cargo fork or other work item, and drag the goods up and down. (3) the door frame. It is the skeleton of the work unit, and most of the zero parts of the work unit are installed on the door shelf. The two-section door frame consists of the outer door frame and the inner door frame of the lower lift. The three-section door frame consists of three doors, internal, medium and outer. (4) the leaning mechanism of the door frame. The reclining of the door frame is made up of inclined oil cylinders. (5) the lifting mechanism. Drag and drop power plant and traction gear. It is composed mainly of sprocket, chain and lifting cylinder. (6) hydraulic control system. It is a combination of the lifting of the cargo and the tilt of the door frame and the other actions performed by the hydraulic system. It consists of hydraulic components, pipes and manipulators

Q:How do you tell if a forklift is retrofitted?

Listen, listen to the sound of the engine and listen to the noise of the engine and see if there is any smoke in the engine, and the bearing has no wear and tear.

Q:What is the meaning of a forklift?

The average forklift fuel is diesel and electric. Natural gas forklifts are supposed to be burning natural gas, which is now used by many heavy trucks

Q:Can a forklift drive into an elevator?

My friend, although it has happened, I still want to tell you that it's ok if you do the right thing. I don't believe that will be difficult for you. Remember to study forklift and elevator operation mode. This way, you have the bottom, more the next time convenient express