Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1 set
Supply Capability:
15 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Descriptions:

NYJ-800T to 1600T multi-layer door skin press machine/ door skin melamine veneer/door skin press suitable for moulding and veneering of melamine door skin,natural wood door skin.Multi-layer door skin press machine/ door skin melamine veneer/door skin press adopts spring synchronous closed structure, can stop at any position according to the production preocess(or position-limit control), and the residence time can be adjusted. Multi-layer door skin press machine/ door skin melamine veneer/door skin press holding time and pressure set automatic control. Two operaing mode(manual and automatic) are convenient for customers to choose.

Features:

 1. Control system:  PLC control with connection to computer  (Mitsubishi, Omron, Siemens optional), from infeed to storage,

complete lamination offered. This system is stable and is of high automation. Technical parameters can be set, modified and

monitored by human-machine interface.
2. Mechanical system : Stable, easy to operate, high efficient and easy for maintenance.
3. Hydraulic system: Top branded valves and pumps are used for this system, with features of high stability, low noise, and no leakage.

Technical parameters of multi-layer door skin press machine/ door skin melamine veneer/door skin press:

Machine modelNYJ-900-3*7NYJ-900-4*8 NYJ-1200-3*7NYJ-1200-4*8NYJ-1400-4*8
Max. Pressure90009000120001200014000
Door skin size(mm)900*21001220*2440900*21001220*24401220*2440
Multi layers2003-4-52003-4-52003-4-53/4/503/4/52003-4-5
Specific pressure(kg/cm2)47.630.263.540.347
Daylight opening(mm)250250250250250
Hot platen size(mm)1150*22501400*26001150*2250400*26001400*260
Hot platen thickness(mm)6060606060
Main cylinder(mm*pcs)Φ280*6Φ280*6Φ280*8Φ280*8Φ340*6
Max.pressure(Mpa)2525252525
Max. Temperature(C°)210210210210210
Net weight(Tons)354038/44/5040/48/5252
5 layers press dimensions(m)3.2*1.3*4.33.5*1.5*4.33.2*1.3*4.33.5*1.5*4.33.5*1.5*4.3

Multi-layer door skin press machine/ door skin melamine veneer/door skin press picture:

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin PressMulti-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Our certification 

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin PressMulti-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press


Package:Multi-layer door skin press machine/ door skin melamine veneer/door skin press will be packed according international wood door skin press machine standard packing

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

Our Factory

Multi-layer Door Skin Press Machine/ Door Skin Melamine Veneer/Door Skin Press

FAQ

Q:Where is your factory located? How can I visit there? 
A:Our factory is located in Wuxi, Jiangsu Province, China, about one hours train from Shanghai . All our clients, from home or abroad, are warmly welcome to visit us! 

 

Q:What is the material of your products?

A:The main material are steels, oil cylinder and other. We can also choose material as customers’ requirement.

 

Q:How can I kown more about the press machine? 

A: We are honored to send you some pictures and vedio about our machine. And we welcome every customer visit our factory.

 

Q:How does your factory do regarding quality control? 
A:Quality is priority. Factory director always attach great importance to quality controlling from the very beginning to the very end. We has gained ZDHY, ISO9001 authentication.

 



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:16 year old bench press?
I am Atien Spells I am 16 my weight is 200 and I can bench 315
Q:Will US Customs Press Charges?
I wouldn't say that two bottles are a very small amount. It is doubtful that US Customs will pursue you in another country, especially if they are legal in your country.
Q:Advantages of loose powder over pressed powder?
They both have advantages and disadvantages. Loose powders are more finely milled, so they can give a very flawless finish on the face. You can also better control how much product is applied to the face, as you are using a brush to apply them. You can go as light or heavy as you want at any given time. They are wonderful for setting liquid and powder products. But loose powders usually come in large containers and require a brush for application, so they can be difficult to use on-the-go for touch-ups (and messy!). Pressed powders tend to be a bit creamier and less finely milled and are applied with a pad or sponge, so they always go on heavier and thicker and give some coverage. That's not necessarily bad, and in fact can be very good when you want to touch-up your foundation over the course of the day. The pressed powders are also eaiser to throw in a purse without creating a mess and are easy to use virtually anywhere as they usually come with the pad or sponge right in the container. There are some oils in any pressed powder (to keep it as one solid mass in the container) so they can get a little cakey on the face and some very oily folks may find the powder changes color on their faces. So one isn't necessarily better or worse than the other in general. You really have to think about the results you want and where and when you are likely to use it. They each have their place!
Q:Hydraulic Press PSI vs Tons.?
A 30 ton press operating at 150 psi must have a hydraulic cylinder with a diameter of approx. 22 1/2 inches. Most presses are rated at their maximum force output. The only way that you can change the load applied by the press is to change the pressure applied to the hydraulic cylinder. With 150 psi hydraulic fluid furnished to the ram or cylinder your press will always have an output of 30 tons, If the press die is 100 inches square, the pressure that will be applied by the die will be 30 tons = 60,000 pounds/100 sq. inches = 600 psi.
Q:hard press really need answers?
Well a hard press just temporarily straightens your hair where as a relaxer permanently straightens it. So since you only got your hair press, your hair is likely to absorb moisture and puff up. So try to avoid water, rain, sweating, humidity(hot weather) and steam from the shower (you have to tie your hair up). But those are all preventative measures and it seems like the damage has already been done. You probably need to run through it again with a flat iron.
Q:What brand reloading press should I get?
I grew up reloading on an old Lee and an old Herters press. I still have the Lee for my small batches and use a case-fed DIllon XL650 progressive for large lots of ammo. I shoot 300-1000 rounds per week, though. I recommend Lee with no hesitation. I have a set of RCBS carbide 9mm dies that seat half of the bullets noticeably crooked in the case. My set of small base .223 RCBS dies won't size a case very well at all, and I know how to adjust dies and own/use case gauges. I now use all Dillon and Lee dies, except for one old Lyman set and one old Herters set which still work great. My powder scale is also electronic (Dillon), and I highly recommend them for two reasons. The extra speed will take the biggest tedium out of reloading, and it is actually safer because a digital readout is harder to read incorrectly than the different sliders on a balance poise. I prefer the Lee of all the balance scales, though. It's cheap, idiot-proof, impossible to bend, and easier-to-read than the RCBS models. When not priming in the progressive press, I much prefer the Lee Auto Prime than using the press. First, I recommend a good reloading manual, even before you buy equipment. The ones from Lee and Lyman are outstanding for giving novices the background and education about the equipment in addition to a large amount of data. Also, have several books of data, and also check the websites of the powder manufacturer and bullet maker to compare data from several sources before making a load.
Q:for slowing down, if i press brake gently and release immediate,whether the car will slow down?
Yes, if you press brake gently and release immediately the car will slow down.
Q:Criminal Law Question Pressing Charges?
Do you want to press charges is really the equivalent of asking, are you willing to be a cooperative witness? Obviously, to prove some types of crimes, the victim's cooperation is absolutely necessary. For instance, an element of a theft charge is that the property was taken from victim without victim's consent. So, the victim will need to cooperate and testify He did not have my permission in order to successfully prosecute. Some types of crimes really do not need victim testimony, such as murder -- it's reasonable for a jury to assume that the victim did not consent to being killed.
Q:In stick shift cars do you press the brake pedal with your left foot or right foot?
right foot so you can brake and shift down with ur left.
Q:Strong at leg press but struggling at squats?
Leg press is only good if you squat. I will talk bad about it cause you seem like you care about how much you lift in whatplanet fitness? Squats Are a compound lift which work abdominals, quads, and hammies. Don't be a ***** and diss squats cause they're what gets the chicks 4 years powerlifting. 2 years bodybuilding and tracking macro nutrients. Not giving a **** what i ifted in the gym the first year to impress people. Making sure I lifted correctly

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range