Q:The difference between ultra high speed angular contact ball bearings and other plain bearings

The roller of angular contact ball bearings is ball, because it is a point contact (different from roller bearing line contact), so it can provide higher speed, smaller heating quantity and higher rotation precision. In some high speed spindle applications, ceramic ball hybrid bearings will also be used. Compared with the traditional steel ball, the characteristics of ceramic ball materials endow the ceramic ball bearings with high rigidity, high speed, high temperature resistance and long service life, so as to meet the customers' demand for machine tool bearing products. (flight five Rui reminded you, at present, the mainland ceramic ball mixed bearings spot less, in your choice of such imported bearings, you need to pay attention to delivery time).On the contact angle of angular contact ball bearings, 15 popular and the contact angle of 25 speed; high performance usually contact angle of 15, while the axial contact angle of 25 with high bearing capacity. Due to the effect of preload contact application of ball bearings for precision angle is very large, such as high load capacity, high rigidity of the occasion, will generally choose bearing pre medium or heavy load; and for some applications of high speed and high precision, in the early selection of imported bearings, need to pay attention to choose the appropriate pre load. Pre load is generally divided into light, medium, heavy three kinds, generally light preload is more common. In order to facilitate the use of customers, the general will have universal matching, precision angular contact ball bearings. This type of imported bearings eliminates the customer's preload adjustment, thus saving installation time.

Q:Can angular contact ball bearings be adjustable?

No, please adjust the heart with the self-aligning bearing

Q:What does angular contact ball bearing 70216AC mean?

Name = General rolling bearing type code No.Standard = excerpt from GB/T 272-1993-----------------------------------------------------------Bearing type = angle contact ball bearingCode =7The original code name is =6Bearing type = angle contact ball bearingDimension series code = (0) 2After two, 16, bearing nominal diameter 16 * 5=80mmName = internal structure codeStandard = excerpt from GB/T 272-1993

Q:How can angular contact be distinguished from the front and back? What are the characteristics of each?

Hello, there is a number on the front, no number on the back

Q:How to install angular contact ball bearings?

The installation of angular contact ball bearings is more complicated than deep groove ball bearings. It is mostly installed in pairs, and preload is necessary. Well installed, can make the host work accuracy, bearing life greatly improved; otherwise, not only the accuracy can not meet the requirements, the life will be affected.The installation form of angular contact ball bearings, a series of face to face and back to back, three. (two back-to-back wide end bearing relative) installation, bearing contact angle line along the axis of rotation diffusion direction, bearing angle can increase the radial and axial rigidity, maximum deformation resistance; face to face (two relatively narrow end bearing) installation, bearing contact angle of the rotary axis line towards the direction of its convergence. To the point of less rigidity. Because of the inner ring of the bearing outer ring out, when pressing the outer ring two bearing together, the original gap ring is eliminated, can increase the bearing preload; tandem arrangement (two wide end bearing in one direction) when installing the bearing contact angle and parallel lines in the same direction, the two share the same bearing the direction of the work load. However, in order to ensure the axial stability of the installation, the two pairs of bearings arranged in series must be installed opposite the ends of the shaft in order to ensure the axial stability of the installation.

Q:Two angular contact ball bearings, the use of clearance problems

The installation form is DB, and the inner ring preload is adjusted. For example, by adjusting the nut of the lock inner ring, tighten the force adjustment. Generally selected bearings, manufacturers have been conscious of the inner ring and outer ring thickness is not the same, that is, as long as locking the inner ring, the force is the factory set the amount of preload.

Q:Angular contact ball bearings, how to judge the size of the mouth?

Judge the size of the mouth, of course, big mouth is large, that is, the edge of the slope for the side of the big mouth.

Q:Is there a way to calculate the axial force of angular contact ball bearings?

The rated axial dynamic load of the bearing is: 4300N. Axial force can be calculated by formula. Please consult the professional manual!

Q:What are the differences between angular contact bearings and deep groove ball bearings?

Deep groove ball bearings and angular contact ball bearings with inner and outer diameters and wide dimensions have the same inner ring size and structure, but have different outer ring sizes and structures:1. deep groove ball bearings, outer raceway, both sides of the double shoulder, and angular contact ball bearings generally single shoulder;2. deep groove ball bearings, raceway curvature and angular contact ball is different, the latter is often greater than the former;3. deep groove ball bearings, outer raceway and angular contact ball bearings of different, non central position, the specific value of angular contact ball bearings designed to be considered, and the degree of contact angle related;In terms of use:1. two different purposes, suitable for deep groove ball bearings bear radial force and smaller axial force, axial and radial load and combined load torque, and angular contact ball bearings can withstand axial load, radial load is larger (with different contact angles and loads of different sizes), double matching (with matching mode vary) is two-way can withstand axial load and torque load.2., the limit speed is different, the same size of angular contact ball bearings, the ultimate speed is higher than deep groove ball bearings.With type, size, precision, and so on.

Q:How many angles are there in angular contact ball bearings? How many degrees are they?

A stands for 30 degrees, A5 stands for 25 degrees, B stands for 40 degrees, and C stands for 15 degreesThe new Seiko NSK serves you!