Motor Grader 215HP for Gr215
Engine Model:Cummins 6ctaa8.3
Dimension(Lxwxh):8970 X 2625 X3470mm
Blade Width X Height:4270X;610mm
Min. Turning Radius Using Articulation:7000mm
Production Capacity:300 Units/Month
Performance and Characteristics of XCMG Motor Grader(GR215):
The adopted articulated frame assists the front wheel to steer, featuring small turning radius and flexablity
Electro hydraulic controlled brake power shift gearbox includes 6 Forward gears, and 3 Reverse gears.
The adopted international matched hydraulic parts ensure the reliable operation.
The blade movement is hydraulic controlled fully.
The rear axle is three-way drive axle with NO-SPIN self -locking differential.
The reasonable distribution of the adjustable operation panel, seat, lever and instrument guarantees the comfortable and convenient operation.
The luxury and beautiful cab features wide visibility and good sealing.
The machine can be equipped with front bulldozing plate, rear scarifier, front harrow and auto-leveling system
|Engine model||6CTAA8.3 6CTA8.3|
|Rated power/speed||153kW/2200rpm 160kW/2200rpm|
|Travelling speed ,forward||5,8,11,19,23,38 km/h|
|Travelling speed ,reverse||5,11,23 km/h|
|Tire inflation pressure||260 kPa|
|Working hydraulic pressure||16 MPa|
|Max. steering angle of front wheels||±50°|
|Max. lean angle of front wheels||±17°|
|Max. oscillation angle of front axle||±15°|
|Max. oscillation angle of balance box||15|
|Frame articulation angle||±27°|
|Min. turning radius using articulation||7.3m|
|Maximum lift above ground||450mm|
|Maximum depth of cutting||500mm|
|Maximum blade position angle||90°|
|Blade cutting angle||28°-70°|
|Circle reversing rotation||360°|
|Moldboard width X height||4270×610mm|
- Q:How do novices see flat blades and ground leveling?
- Can be measured with a horizontal ruler, the novice is not easy to see whether it is flat at once.A long distance level, which is characterized in that the left ruler can cast measurement (1), (4) the right ruler two meshing level subject composition. This level can be used for short distance measurement, and can be used for distance measurement, but also solve the current level of instrument can only measure in the open, narrow place to detect faults, and accurate measurement, low cost, convenient carrying, affordable.
- Q:Are there any common specifications for grader tyres?
- The following is a common method of tire specification:Example: 185/70R1486H185: tread (mm)70: flat ratio (height / tire tire width)R: meridian structure14: steel ring diameter (inch)86: load index (corresponding to the maximum load of 530 kg)H: speed code (for maximum safety, speed is 210 km / h)Speed code, maximum speed (km/h)M:130N:140P:150Q:160R:170S:180T:190U:200H:210V:240W:270Y:300
- Q:How to adjust the balance of scraper in operation skill of Grader?
- 1. blade angle soil side shifting operation, this method is suitable for digging out side ditch soil to repair road type or fill low embankment. First, according to the nature of the soil, adjust the blade, shovel angle and soil scraping angle.
- Q:Paver, grader, roller, post responsibility 50
- The working surface static roller and 1 roller should be properly smooth, to fill the soft subgrade should first use ramming machine roller by kneading or rolled or compacted layer behind the available road. 2, when the soil moisture content of more than 30% may not be rolled, water content less than 5%, appropriate watering. 3, the longitudinal slope of the work area should not exceed the maximum climbing capacity of the roller, the transverse slope should not be greater than 200. 4, the machine weight should be selected according to the rolling requirements. When a roller machine may need to increase the weight inside the roller sand or water. When the temperature drops to 0 degrees centigrade, the weight shall not be increased by water 5, and the tyre roller shall not be operated on the big stone foundation. 6, before the operation of pipeline and fittings of each system should be free of cracks and loose leakage phenomenon, the scraper roller should be smooth, not loose fasteners, tire roller should also check the tire pressure, to confirm the normal before start. 7. The internal combustion engine shall not be forced to be pulled by traction, nor shall any mechanical or object be hauled by the rollers. 8. After starting, test operation should be carried out. It is confirmed that the operation is normal, the braking and steering functions are sensitive and reliable, and the operation can be done. No obstructions or personnel around the roller should be operated. 9, rolling should be low speed, variable speed must stop. The speed should be controlled at 3 ~ 4 /h within the scope of our knowledge, no change in a rolling schedule. The rolling process should be kept in the right direction. When rolling second rows, the rollers must be overlapped with half of the rollers. 10. The direction and direction of the reversing roller shall be carried out after the roller is stopped. The reverse clutch shall not be used for making system.
- Q:How does the heating and air conditioner work?
- Which one? Mine is the reverse of the cold air. Just press the button
- Q:What is the cause of the oil leakage in the Tiangong 180 grader engine and gearbox?
- More than 90% of the oil spill is caused by corrosion of the oil seal.
- Q:Excavators, rollers, flat machines, dump trucks, loaders, wearing parts what? The more detailed the answer, the better
- You are talking about these construction machinery, there are too many wearing parts, you should find the accessory details, each machine
- Q:What is the reason that the ZF gearbox of Tiangong grader does not go?
- There are many reasons for this. Are there any stalls or are there no individual stalls? To their own investigation, such as the valve pressure is too low, friction slip, oil enough, and so on
- Q:Shantui grader maintenance what needs attention?
- The roller coaster SG16-3 model is basically nothing wrong with it.1) check oil and coolant leaks, record tire damage, hose extrusion, bolt release, or edge wear.2) remove debris, debris and garbage from the soil or soil in a loose disk.
- Q:31 floor machines hanging stalls, no aisle
- Hello, after reading your description, I didn't find out what the problem wasIf you do not describe the problem clearly, it is difficult for you to answer the question to help you.I hope you can describe the questions you want as soon as possible in order to help you answer the questions as soon as possible. Thank you for your help. Thank you.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range