Monocrystalline Solar Module SM596 255W

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
25 set
Supply Capability:
8000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 Product Description:

1.Structure of  Monocrystalline Solar  Module SM596 255W Series Description

Monocrystalline Solar  Module SM596 255W: High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

IV AI frame: Without screw, rner connection. 6 holes on the frame can be installed easily.

V Junction box: Multi function junction box with water proof.

VI Long lifetime: ≥25 years; Less power decrease.

VII Good performance of preventing from atrocious weather such as wind and hails.

VIII Resisting moisture and etching effectively, not effected by geology.

IX The certificate issued by international authority: TUV, IEC, CE.ISO9001.MCS

2. Standard Test Conditions of Monocrystalline Silicon Solar Panel:

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

Advantages of Polycrystalline Silicon Solar Panel

• 25 year transferrable power output warranty: 10 years / 90%, 25 years / 80%*

12 year material and workmanship warranty

• Timeliness of delivery

• Quality Products certified (TUV, IEC, CE.ISO9001.MCS)


3. Characteristics of Monocrystalline Silicon Solar Panel:

• Guaranteed tolerance +3%

• High manufacture standards
• Reliable power output
• High module efficiency
• Module efficiency up to 15.5%
• Cells efficiency up to 17.6%
• Strong compressive strength
• Certified to withstand high wind of 2400Pa

4. Solar Panel Images


Monocrystalline Solar  Module SM596 255WMonocrystalline Solar  Module SM596 255W


Monocrystalline Solar  Module SM596 255W

Monocrystalline Solar  Module SM596 255W


5. Monocrystalline Silicon Solar Panel Specification


Monocrystalline Solar  Module SM596 255W

Monocrystalline Solar  Module SM596 255W

Monocrystalline Solar  Module SM596 255W

Monocrystalline Solar  Module SM596 255W



We have organized several common questions for our clientsmay help you sincerely

How about your company

We are a private-owned high-tech company who specializes in developing, manufacturing and marketing of silicon ingots, solar wafer, solar cells, solar modules, PV systems and solar applications products.
At present, We has one research & development team, whose members are well-known experts in photovoltaic area. We also have advanced production and test equipment.

How to guarantee the quality of the products

Our products have been certified by CE, CEC,MCS, IEC61215, IEC61730 and ISO9001.

• 25 year transferrable power output warranty: 10 years / 90%, 25 years / 80%*

• 12 year material and workmanship warranty

• Timeliness of delivery

• Quality Products certified (TUV, IEC, CE.ISO9001.MCS)

How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:DIY single solar panels with outlets?
Sounds like an electrocution in the works. Try learning about grid tied and grid free solar system first.
Q:How may solar panels/wind turbines may be made affordable?
economies of scale or mass production is the answer to just about any item being made it cars or computers or solar panels. Now, how to get there is the question..... market forces? as more people want a 'greener product demand goes up quantity produced goes up unit price goes down....but that takes awhile.... government help ? subsidies...the US gov takes some of your tax money and makes it available as rebate to people putting panels/wind systems in their homes, and establishes policies to companies to take less taxes if they build wind/solar.... government orders: You MUST put in a solar panel ( or we'll send the Green Police to bust you)
Q:electronics help solar panel?
[] Use it to charge 4 pieces AA cell ( connect in series to make 5V battery pack ) for 0 to 4 hours. Good for cell rated 600mAH ,2000mAH,2500mAH. [2] Cannot increase current. Buy some more this panel and hook them together in parallel to increase current. You need at least ten pieces to make current reaches .6A to light up some 6V bulbs.
Q:Linking multiple solar panels?
It will not hurt the panels to hook multiple ones in parallel (all red or positive wires together, and all black or negative wires together), and connect it to the single port on your charge controller. The more alike the two panels are, the better this will work. With two absolutely identical panels, you should get twice the power. With mismatched panels, somewhat less. This arrangement will not hurt the charge controller, either. The worst that happens is that the controller isn't able to take full advantage of all the power available. By the way, it's not advisable to connect both solar and wind together.
Q:Solar Panel Manufacturing?
At this very moment, most of the people already have an idea on how to create their own solar panels, And creating your own company takes a lot of necessities such as permits ans other stuffs like that,.
Q:Cost and energy generated by solar panel?
A little more than 0 watts per square foot, so that size panel would generate 250 watts under ideal conditions, which is noon on a sunny but not too hot day, near the equator. That's about /3 horsepower, or the same power as a man working hard. That is larger than needed to keep the battery of the car charged, unless you plan to run a laptop or something off it at night. The power is also too small to power the car for driving. If it's an electric car, you could get maybe another 2 miles per day out of the car, again, under ideal conditions. An RV store might have an idea of how much installation would cost. They would be accustomed to solar panels for RV's, but probably not small cars. A panel of that size would cost perhaps $500-800 just for the panel.
Q:Want to power this with solar panels?
I do not know, but there is a house in Lafayette which was built with solar power. It was to have a solar system, so the contractor's first act was to put up a solar array on the property. It had battery backup, and was used to provide the electrical power during construction. during completion of the house the solar system was installed on the roof of the house.
Q:I have two ARCO M55 solar panels. What do I need to connect to a 2Volt bank of batteries.?
This Site Might Help You. RE: I have two ARCO M55 solar panels. What do I need to connect to a 2Volt bank of batteries.? Do I need some type of regulator when the batteries are fully charged.? The Arco Panels voltage is approx 7VDC at 2.5 amps, Should I limited the voltage to 4VDC??. I would like to connect both panels to up to five batteries at one time...??
Q:How many LED's can power a solar panel?
The 40 kmcd rating is a measure of luminous intensity (how bright it looks), not a measure of output power of the visible light. We can estimate the performance of your proposed system as follows: The LEDs on OKorder each are rated about 20mA maximum at about 3.2V, or 64mW (milliwatts). If you use 470 ohm resistors connected to 2VDC, the current that will flow, per LED, will be about: (2V-3.2V)/470ohm = 0.0872A = 8.72mA The power taken from the 2VDC power source will be: P2v = 2V x 8.72mA = 224.6mW (per LED) The power input to each LED will be about: Pled = 3.2V x 8.72mA = 59.9mW (per LED) The LED has a luminous efficiency that can range from about 4.2% to 22%. This efficiency is the ratio of the amount of visible light output (in watts) divided by the input power (in watts). The OKorder listing doesn't identify the output power level (either in watts or in lumens), so let's assume a 0% efficiency. The LED output power will be about: Pout = 59.9mW x 0% = 5.99mW (per LED) A solar panel converts visible light to electrical energy with an efficiency that ranges say about 6% to 8%. Suppose the solar panel efficiency is 2%. Then the electrical power output by the panel will be about : Pe = 5.99mW x 2% = 0.72mW (per LED) If you shine 00 LEDs on the panel, the output electrical power will be 00 times that amount: Pe00 = 0.72mW/LED x 00 LED = 72mW <===ANSWER The power taken from your 2V source will be about: P2V00 = 224.6mW/LED x 00 LED = 22460mW = 22.46W The system efficiency will be about: Eff = solar output / battery input = Pe00 / P2V00 = 72mW / 22460mW x 00% = 0.32% SUMMARY: If you shine 00 of the LEDs on the panel, you will capture back about 0.32% of the energy expended, or regain about 72mW.
Q:where to buy solar panels?
You need to be more specific about what type of solar panel. ) PhotoVoltaic (produces electricity) 2) Fluid (Glycol) (heats water or air using a heat exchange tank) 3) Fluid (Water) for pool water heating

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range