Q:How do you pull the contracted muscles with a mechanical device?

Muscle cramps occur in swimming is not surprising in panic, self-help is not water side hand cramps cramp toes, forced to pull the body, at the same time with the side of the hand hold the leg cramps cramp knee, knee extension to help relieve spasm, after, and then slowly toward the shore. < < excerpt > > (Mo Fei) the method of dealing with muscle spasm during exercise. The main causes of muscle spasm are: 1. A great deal of dehydration in the training competition, which results in imbalance of the body's dielectric.

Q:Is the construction of the water supply steel pipe a telescopic device?

The pipe line survey shall be carried out in accordance with the coordinates of the pipe line control points. In order to master the control points of the canal well, the permanent reference piles shall be introduced and set up in the engineering site, and properly maintained, and the project shall be submitted to the owner after completion of the project. After the above work, please check the line of supervision personnel, confirm the ditch excavation work.

Q:What are the main uses of a bolt tensioner?

Stretch, fasten, or loosen the bolts and think of the bolts as a rubber band,

Q:The working principle of the bolt tensioner

A bolt tensioner consists of a hydraulic pump, a high pressure hose, a pressure gauge, and a stretched body. The hydraulic pump is the power source, the pressure meter reflects the output pressure of the pump, and the high pressure hose is connected with the hydraulic pump and the drawing body. A drawing body is an actuating element for realizing a bolt stretching. The utility model is mainly composed of a piston cylinder, a piston, a supporting bridge and a stretching nut.

Q:What kind of materials are used in the telescopic equipment of machinery industry?

The most common form of bond failure is shear. So the key requires enough strength and steel. No. 45 is the most commonly used steel.

Q:What are tensile and shrink wrapping?

Stretch packaging began in 1970s as a new packaging technology developed from shrink packaging. Stretch packaging is a packaging method that relies on a mechanical device to wrap the elastic film around the package at room temperature and seal it at the end thereof. Since stretching packaging does not require heating, the energy consumed only shrinks by 1/20 of the package. Stretch wrap can bale single items, can also be used for packing pallet packaging, set.

Q:How to achieve telescopic power arm

Consider synchronous motor, screw drive, photoelectric induction limit, PLC connection drive control displacement

Q:Mechanical structure and principle of automatic focusing lens for camera

Ultrasonic ranging method, which is based on the ultrasonic wave in the digital camera and the time between the subject of distance measurement. Digital cameras are equipped with ultrasonic transmitting and receiving device, when the ultrasonic vibration generator for ultrasonic, ultrasonic to the subject, is the receiver's perception of return immediately, and then by the integrated circuit according to the ultrasonic round-trip time to calculate the focusing distance.

Q:Mechanical principle of belt expansion machine

Conveyor sections: two, three, four. Width of conveyor belt: 500, 600, 700, 800, 1000, 1200mm. Belt conveyor speed can be selected: constant or variable speed. Belt conveyor direction can be selected: one-way or two-way conveying materials. Belt conveyor angle can be selected: horizontal, fixed angle or automatic lifting. The fixed section of the conveyor can be fixed or fixed. Conveying speed: <30 M / min.. Conveyor capacity: <70 kg / m..

Q:What is the automatic telescopic function of an automatic umbrella?

Working process and principle analysisA. the long handled umbrella is in a tight position, that is, the middle slide is at the lower dead point1. the elasticity of the spring 1 at the moment reaches its minimum value and is greater than 0.The 2. middle slider is at the lower dead center and is locked by the bump switch 1.On the 3 of the 3. rib buckle at the fulcrum of the slider 2, a spring 2 stretch for 0.The B. long handle umbrella is at the beginning of the opening, i.e., the middle slider begins to move up