Q:What is a limiter?

The compensator of the inner sleeve shall be noted that the direction of the inner sleeve is consistent with the direction of the medium flow, and the hinge rotation plane of the hinge type compensator shall be in accordance with the displacement rotation plane.

Q:What are the main uses of a bolt tensioner?

Stretch, fasten, or loosen the bolt and think of the bolt as a rubber band. It is flexible and can be stretched freely within its range of elastic deformation

Q:How do you pull the contracted muscles with a mechanical device?

Muscle cramps occur in swimming is not surprising in panic, self-help is not water side hand cramps cramp toes, forced to pull the body, at the same time with the side of the hand hold the leg cramps cramp knee, knee extension to help relieve spasm, after, and then slowly toward the shore. < < excerpt > > (Mo Fei) the method of dealing with muscle spasm during exercise. The main causes of muscle spasm are: 1. A great deal of dehydration in the training competition, which results in imbalance of the body's dielectric.

Q:Is the construction of the water supply steel pipe a telescopic device?

The trench excavation method should be carried out before the investigation and study, fully understand the channel section of the soil, underground water, underground structures, underground trench near building and construction environment, find the problem timely contact with the construction unit, research on treatment measures. In order to prevent over excavation, the groove should be laid out before excavation, and the excavated layer shall be excavated at intervals according to the opening slope, and the excavation depth shall be measured at any time.

Q:What is a bolt tensioner? How do you use it?

The bolt tensioner is a tool for fastening and dismounting bolts. It has several forms, such as manual, electric, pneumatic, hydraulic and so onBolt tensile bolts and shear bolts, tensile bolts subjected to tensile load is axial load; shear bolts subject to shear load, tangentialThe bolt load is the force acting on the bolt, which is usually expressed by pressure, that is, the force / force acting areaThe so-called pre tightening force is a force in the mounting bolt in the bolt on the pre action (Ya Qiang), its role is to enable the bolt force and deformation, the fasteners are combined together, and can prevent the bolt fracture under impact load.Note: the preload and bolt load are less than the rated load of the bolt

Q:What are the main uses of a bolt tensioner?

He is elastic, in his range of elasticity can be stretched, and generally does not hurt the threaded bolt tensioner, high precision, high tensile bolt General requirements is the most appropriate, domestic stretcher good brand, I recommend Prima, quality customer service is good, and I hope to you help!

Q:The working principle of the bolt tensioner

During operation, the high-pressure oil output by the power source is conveyed to the piston cylinder 3 by a high-pressure hose, and the piston in the piston cylinder moves upward under the action of pressure to drive the stretching nut upwards. The nut and bolt tensile work thread, thereby stretching the working bolt, the bolt elongation reached the required amount of deformation, deformation control in the elastic deformation range, then the pre tightening or disassembling operation, finally through the hydraulic or mechanical return the work bolt return to its original shape, finish the homework.

Q:What are tensile and shrink wrapping?

Shrink wrap (shrink wrap) is the use of shrink film wrapped items (or inner package), and then the film proper heating treatment, so that the film shrink and cling to the goods (or inner package) packaging technology. Shrink film is a specially stretching and cooling treatment of polyethylene film, because the film residual tensile stress in the directional contraction, the stress is heat will be eliminated, so that the horizontal and vertical were sharp contraction, while the film thickness increases, the shrinkage rate is usually 30% to 70%. The contraction force reaches the maximum value at the cooling stage, and can keep for a long time.

Q:Mechanical structure and principle of automatic focusing lens for camera

From the basic principle, AF can be divided into two categories: one is based on the camera and photographed location AF target distance between measurement and another is based on the focus screen clear focus imaging detection.

Q:Mechanical principle of belt expansion machine

Principle: the telescopic belt conveyor adds a telescopic mechanism to the ordinary belt conveyor, so that the belt conveyor can be freely extended in the length direction.