Q:Classification of bearing housings

Suggested reading, upstairs is not written

Q:Can I put in 80 of the outer diameter and 13 of the thickness?

1511 bearings to adapt to the bearing sub model is: SN511; to adapt to bearings, the outer diameter is 100; width is within 33. What you say doesn't work

Q:What type of bearing does the bearing block of SN220 match?

The model of the bearing is 222202322012202220

Q:Why is the lug on the two sides of the bearing seat hole higher than the connecting flange of the box cover and the box seat?

The lug at the side of the bearing seat shall have enough supporting surfaces to fit the connecting bolts and secure the space required for tightening the bolts.

Q:What's the difference between the bearing seat and the pedestal?

The former can be a supporting sliding bearing, or a rolling bearing,The latter refers to the sliding bearings

Q:Ladies and gentlemen:Ask a question, the outer spherical bearing block FS seat, online check is "with convex square block", but bought a sample back, with the F seat is the same, there is no lug. Now I can't figure out what the difference between the F block and the FS block isPlease know me under!! Thanks

FS is a square with a convex head, you buy, must have been fooled

Q:What is the UCP bearing seat, what are the characteristics?

UCP is with vertical seat outer spherical bearing

Q:The outer ring of the rolling bearing is fixed in the bore of the bearing seat, and the inner ring rotates with the shaft. What load does the outer ring bear?

The outer ring is radial load

Q:Is the bearing seat the same as the bearing box?

The bearing should be first installed on the shaft, the bearing box cover SN220 unscrewing the bolts, remove the cover on the corresponding position of the bearing on the box, a ring to ring in place, bearing box on both sides of the hole is provided with a seal cover back and tighten the bolts, the basic process is like this. Depends on the specific operating environment.

Q:Outer spherical bearing and bearing seat installation, how to achieve the role of heart adjustment, the recent purchase of bearings (such as F211), by hand or inserted into the stick, turn bearings, bearings do not flip

Where is the sphere, where is the adjustment of the heart?.