MET COKE of Coke Strength after Reactivity 60

Ref Price:
Loading Port:
Lianyungang
Payment Terms:
TT OR LC
Min Order Qty:
100 m.t.
Supply Capability:
3000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


1. Structure of Metallurgical Coke of Coke Strength after Reactivity 60 Description:

Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.

Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame. 

Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.

2. Main Features of the Metallurgical Coke of Coke Strength after Reactivity 60:

• Quality assurance

• Mutual benefit

• Preferential price

3. Metallurgical Coke of Coke Strength after Reactivity 60 Images:


 


4. Metallurgical Coke of Coke Strength after Reactivity 60 Specification:

Parameters

Guarantee

Moisture (ARB)

5% max

Ash (DB)

12.50% max

Volatile Matter (DB)

1.4% max

Sulphur (DB)

0.7% max

Phosphorus (DB)

0.035% max

CSR

60% min

CRI

28% max

M40

82% min

M10

8% max

Size 30-90 mm

90% min

+90 mm

5% max

-30mm

5% max

Mean Size

52 mm

5. FAQ

We have organized several common questions for our clients,may help you sincerely:

1) How to guarantee the quality of the products?

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

2) What are coke's main physical properties?

The average heat capacity is 0.808 kj/(KGK) (100 ), 1.465 kj/(KGK) (1000 )

Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 );

Ignition temperature (air) is 450-650 ℃.

3) How about your company?

Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mmcoke breeze of 3 to 6 mm, and so on.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Effect of coke powder ratio on the index
Quality index of cokeHigh temperature carbonization coke is the solid product, its main ingredient is carbon, the pore structure of spores (or pore porous) with crack and irregular crack. Have a direct impact on how much strength and crushing strength of coke, the index of crack usually (crack length per unit volume of coke in the index) to measure indicator. Pore structure is mainly used for measuring the porosity of spores (pore volume percentage of the total volume of coke) said that it affects the reactivity and strength of coke. The coke used for different purposes, the porosity index requirements change, but it usually requires 40 to 45% metallurgical coke porosity, casting requirements of 35 to 40%, the export of coke need to crack about 30%. coke with high and low levels of porosity, the use of coking coal has a direct relationship, such as gas refining is mainly coke, crack, high porosity, low strength; as in coking coal Break the coke refining base of small, low porosity and high strength. The strength of coke is usually the crushing strength and abrasion resistance of two indexes to represent the strength of coke can be broken. No cracks or defects and M40 values along the fault reference external shock resistance structure; wear strength of coke coke refers to the ability to form glass the surface resistance to foreign friction and no fragments or powder, expressed as the value of M10. The degree of M40 crack coke compressive strength affect the value, value of pore structure of coke impact wear resistance of M10 spores. The determination of M40 M10 and a lot of value, many German migon drum test our method.
Q:What are the requirements for the quality of coke in blast furnace smelting
4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.5, the moisture in the coke: water fluctuations will make the measurement of coke is not allowed, resulting in fluctuations in furnace conditions. In addition, the increase in the moisture content of Coke will make the M04 high, M10 is low, the drum index error.6, the screening of coke composition: in the blast furnace coke particle size is also very important. In the past, the particle size of coke in our country is as follows: the coke size of large coke oven (1300 - 2000 square meters) is greater than 40 mm; the coke size of medium and small blast furnace is larger than 25 mm. However, some of the steel test shows that the coke particle size of 40 - 25 mm as well. Larger than 80 mm of coke to be whole, so that the particle size range. The coke block is uniform, the gap is large, the resistance is small, and the furnace condition runs well.
Q:Coke and coal is one thing
Not the same thing.Coal is often said of coal, including bituminous coal, lignite, anthracite, etc.
Q:How much sulfur content of Coke will affect the casting process of nodular cast iron
The level of spheroidization is not enough. The final sulfur content of molten iron before the spheroidizing treatment is best at 0.03%
Q:With the number of 1 tons of steel smelting coke
The use of coke pig iron smelting blast furnace, for each different, which is each blast furnace coke ratio (the ratio of the iron smelting a ton of coke by iron determined how many meals). The country or the world, the iron and steel enterprises coke are not the same, the coke rate is as low as possible, but there are many factors which restrict the level of coke, such as advanced level equipment, raw material and fuel quality, or the operator level, advanced process and so on many factors which influence
Q:Types of coke and use of coke
The vertical furnace processing of low metamorphic coal production of calcium carbide, ferroalloy, coke, chemical fertilizer production and ultra high power electrode, aerospace and medical high technology and high value-added products such as carbon needle coke the world's most complete and unique characteristics of the Chinese coking industrial system.
Q:The total amount of heat released by the fully burnt 200g coke is 60% by the mass of 10kg water absorption [q coke =3.0 * 107J/kg, C water =4.2 * 103J/ (kg = C)
(1) the amount of heat released from complete combustion of coke:Q put =mq=0.2kg * 3 * 107J/kg=6 * 106J.Heat absorbed by water:Q =Q * 106J suction ETA =6 * 60%=3.6 * 106J;(2) Q =cm t suction dreams,Dry water temperatures:Delta t=Q ceilingC water m water=3.6 x 106J4.2 x 103J/ (kg * c) * 10kgC = 85.7,
Q:Coke coal charcoal are used for what
Charcoal:1 metallurgical industryIn the past, the charcoal was used to smelt iron ore, and the pig iron was melted by charcoal and coke. The structure and mechanical properties were not the same even if the chemical composition was the same. The charcoal smelting pig iron generally has the fine grain structure, the casting is compact, does not have the crack the characteristic, the pig iron with the charcoal production contains the impurity is few, is suitable for the production high quality steel. Due to the reduction of charcoal, so in the metallurgical industry can be used to restore ore smelting metal.In the non-ferrous metal production, charcoal used for surface flux, non-ferrous metal melting, the surface flux in the molten metal surface protective layer, so that the separation of metals and gases, can reduce the loss of molten metal splash, and can reduce the melting material in gas saturation.A large amount of charcoal is also used to produce crystalline silicon, silicon used charcoal ash production should not contain too much carbon and head.
Q:Coke is how to produce, what is its purpose?
Under the condition of air isolation, the bituminous coal is heated to 950-1050 DEG C, which is finally made into coke by drying, pyrolysis, melting, bonding, solidification and shrinkage. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis.
Q:Coke in the steelmaking process in the end is what
3) skeleton: smelting process in blast furnace is gas rise and decline occurred in the opposite charge of movement and interaction, the core permeability is the key operation of blast furnace. In the upper column, gas flow distribution of coke layer; in the middle of the column material, the coke from the skeleton effect, support has been melting the iron ore, the normal gas rise; in the lower column, high temperature in the solid massive existing coke and has become liquid hot metal and slag mixed together, become loose skeleton gas rising and falling iron and slag.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range