Q:What is the effect of coke moisture on the blast furnace?

The influence of coke moisture on blast furnace can be divided into two parts:

Q:What is the difference between metallurgical coke and chemical coke

The chemical composition of coke including fixed carbon, ash, sulfur, volatile matter and moisture. Except moisture, other ingredients in dry coke, is an important raw material of cupola smelting, casting of the components of specific inspection requirements.

Q:Do not understand why some of the indicators of coke is the cause of the full analysis of phosphorus or foundry use of this time?It is best to use the foundry requirements? Thank you

As everyone knows, sulfur and phosphorus is harmful substances in the metal, because the sulfur is out in coke processing, so this index is not required, but the phosphorus in this process has not been effectively removed, so this is the requirement of foundry process or smelting plant. Phosphorus can reduce the strength of the metal, will lead to the metal "cold crisp", so to control the phosphorus content of coke, to prevent phosphorus into the metal.

Q:Coke is divided into several kinds of specifications ah

Three: 1 2 3 coke metallurgical coke of high sulfur cokeCoke is in coal under the condition of air isolation, heating to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage is made, the process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis. Coke is mainly used in blast furnace ironmaking and smelting of non-ferrous metals such as copper, lead, zinc, titanium, antimony, mercury and so on.

Q:What is coke and how is coke classified?

Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% are used in blast furnace, the furnace coke often called metallurgical coke. Metallurgical coke quality standard Chinese formulation (GB/T1996-94) is the blast furnace quality standards.Gasification coke is a kind of coke, which is specially used in the production of gas. It is mainly used in the fixed bed gas producer with solid slag, as the raw material to produce CO and H2 gas:C+O2 - CO2+408177KJCO2+C - 2CO-162142KJC+H2O - CO+H2-118628KJC+2H2O - CO2+2H2-75115KJBecause the process of producing the CO and H2 are endothermic reaction, need heat supplied by the coke combustion, so the heat is gasified char gasification process. The gasification coke required low ash content, high ash fusion point, block degree appropriate and uniform. The general requirements are as follows: >80% fixed carbon ash; 1250 degrees Celsius; volatile 84%, ash

Q:Effect of coke powder ratio on the index

Evaluation of coke quality1, coke: sulfur sulfur is a harmful impurity, pig iron smelting, which makes it one of the iron quality. In steel and iron sulfur content greater than 0.07%, is a waste. From the 11% blast furnace of sulfur ore; 3.5% limestone; 82.5% from coke, so coke is the main source of sulfur. The charge directly affects the coke into blast furnace of sulfur when the sulfur content of coke production. For more than 1.6%, 0.1% sulfur, each additional 1.8%, increase the amount of coke, an increase of 3.7%, ore blast volume added limestone to reduce the yield by 0.3%, sulfur content of 1.5 - 2% metallurgical coke requirements do not exceed 1% 0.7%., the sulfur content of metallurgical coke is less than - 0.4 large and medium sized blast furnace

Q:What is the sample quantity of coke moisture test? What is the test time? How many degrees? That is the national standard.

Methods for determination of moisture content of coke, a method of introduction of a certain quality of coke samples, placed in a drying box, drying at a certain temperature to a constant quality. Calculation of the percentage of water content in the mass loss of the coke sample. Two. Reagent color silica gel: industrial products

Q:Why does Coke provide heat when it is fired, it reacts only at high temperatures and why it is needed to provide heat?Which is the exothermic reaction, carbon dioxide or carbon monoxide?

In addition to the reaction of iron and iron oxide will react C+O2=CO2; reaction exothermic;

Q:Who knows the proportion of pig iron and coke used in Cupola

There are doubts: blank parts output is too low.3, blank export rate: raw materials into melting after the formation of blank, under normal circumstances, the common casting investment for every 1 tons of pig iron, scrap steel and other major raw materials, the lowest to 85% iron, after casting output blanks, nozzle, nozzle, riser, riser for iron smelting water ratio of about 30%; blank standard export rate, nozzle, riser re melted continue after put into use; production enterprises invested 1 tons per dryer, iron scrap and other major raw materials to the lowest 85% of the hot metal, roughly the same with ordinary casting, casting blank after the (standard yield) for hot metal ratio is about 70%, water riser for hot metal ratio is about 15%, and the same outlet riser re melted after continued use.

Q:Coke and coal is one thing

How coal is formedCoal has been hailed as the black gold, the food industry, it is one of the main sources of energy used in the human world since eighteenth Century. Although its important position has been replaced by oil, but in the future for a long period of time, due to the exhaustion of petroleum, inevitable decline, but because of the huge reserves of coal, coupled with the rapid development of science and technology, the new technology of coal gasification is becoming more mature and widely used, coal will become one of the human production life cannot substitute energy.